BCW30LT1G, SBCW30LT1G General Purpose Transistors PNP Silicon www.onsemi.com Features • S Prefix for Automotive and Other Applications Requiring Unique • Site and Control Change Requirements; AEC−Q101 Qualified and PPAP Capable These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS Compliant SOT−23 (TO−236) CASE 318−08 STYLE 6 MAXIMUM RATINGS Rating Symbol Value Unit Collector − Emitter Voltage VCEO −32 Vdc Collector − Base Voltage VCBO −32 Vdc Emitter-Base Voltage VEBO −5.0 Vdc IC −100 mAdc Symbol Value Unit Collector Current − Continuous COLLECTOR 3 1 BASE 2 EMITTER THERMAL CHARACTERISTICS Characteristic Total Device Dissipation FR-5 Board (Note 1) TA = 25°C Derate above 25°C PD Thermal Resistance, Junction−to−Ambient Total Device Dissipation Alumina Substrate (Note 2) TA = 25°C Derate above 25°C Thermal Resistance, Junction−to−Ambient Junction and Storage Temperature MARKING DIAGRAM mW 225 1.8 mW/°C RqJA 556 °C/W PD 300 mW 2.4 mW/°C RqJA 417 °C/W TJ, Tstg −55 to +150 °C Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. 1. FR− 5 = 1.0 0.75 0.062 in. 2. Alumina = 0.4 0.3 0.024 in. 99.5% alumina. C2 M G G 1 C2 = Specific Device Code M = Date Code* G = Pb−Free Package (Note: Microdot may be in either location) *Date Code orientation and/or overbar may vary depending upon manufacturing location. ORDERING INFORMATION Device Package Shipping BCW30LT1G SOT−23 (Pb−Free) 3,000/Tape & Reel SBCW30LT1G SOT−23 (Pb−Free) 3,000/Tape & Reel †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. © Semiconductor Components Industries, LLC, 1999 November, 2016 − Rev. 4 1 Publication Order Number: BCW30LT1/D BCW30LT1G, SBCW30LT1G ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted) Characteristic Symbol Min Max Unit −32 − −32 − −32 − −5.0 − − − −100 −10 nAdc mAdc 215 500 − − −0.3 −0.6 −0.75 − 7.0 − 10 OFF CHARACTERISTICS Collector−Emitter Breakdown Voltage (IC = −2.0 mAdc, IE = 0) V(BR)CEO Collector−Emitter Breakdown Voltage (IC = −100 mAdc, VEB = 0) V(BR)CES Collector−Base Breakdown Voltage (IC = −10 mAdc, IC = 0) V(BR)CBO Emitter−Base Breakdown Voltage (IE = −10 mAdc, IC = 0) V(BR)EBO Collector Cutoff Current (VCB = −32 Vdc, IE = 0) (VCB = −32 Vdc, IE = 0, TA = 100°C) Vdc Vdc Vdc Vdc ICBO ON CHARACTERISTICS DC Current Gain (IC = −2.0 mAdc, VCE = −5.0 Vdc) hFE Collector−Emitter Saturation Voltage (IC = −10 mAdc, IB = −0.5 mAdc) VCE(sat) Base−Emitter On Voltage (IC = −2.0 mAdc, VCE = −5.0 Vdc) VBE(on) Vdc Vdc SMALL−SIGNAL CHARACTERISTICS Output Capacitance (IE = 0, VCB = −10 Vdc, f = 1.0 MHz) Cobo Noise Figure (IC = −0.2 mAdc, VCE = −5.0 Vdc, RS = 2.0 kW, f = 1.0 kHz, BW = 200 Hz) pF NF dB Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. TYPICAL NOISE CHARACTERISTICS (VCE = − 5.0 Vdc, TA = 25°C) 10 7.0 IC = 10 mA 5.0 In, NOISE CURRENT (pA) en, NOISE VOLTAGE (nV) 1.0 7.0 5.0 BANDWIDTH = 1.0 Hz RS ≈ 0 30 mA 3.0 100 mA 300 mA 1.0 mA 2.0 BANDWIDTH = 1.0 Hz RS ≈ ∞ IC = 1.0 mA 3.0 2.0 300 mA 1.0 0.7 0.5 100 mA 30 mA 0.3 0.2 1.0 10 mA 0.1 10 20 50 100 200 500 1.0k f, FREQUENCY (Hz) 2.0k 5.0k 10k 10 Figure 1. Noise Voltage 20 50 100 200 500 1.0k 2.0k f, FREQUENCY (Hz) Figure 2. Noise Current www.onsemi.com 2 5.0k 10k BCW30LT1G, SBCW30LT1G NOISE FIGURE CONTOURS 1.0M 500k BANDWIDTH = 1.0 Hz RS , SOURCE RESISTANCE (OHMS) RS , SOURCE RESISTANCE (OHMS) (VCE = − 5.0 Vdc, TA = 25°C) 200k 100k 50k 20k 10k 0.5 dB 5.0k 1.0 dB 2.0k 1.0k 500 2.0 dB 3.0 dB 200 100 20 30 50 70 100 200 300 IC, COLLECTOR CURRENT (mA) BANDWIDTH = 1.0 Hz 200k 100k 50k 20k 10k 0.5 dB 5.0k 1.0 dB 2.0k 1.0k 500 2.0 dB 3.0 dB 200 100 5.0 dB 10 1.0M 500k 500 700 1.0k 5.0 dB 10 20 RS , SOURCE RESISTANCE (OHMS) Figure 3. Narrow Band, 100 Hz 1.0M 500k 30 50 70 100 200 300 IC, COLLECTOR CURRENT (mA) 500 700 1.0k Figure 4. Narrow Band, 1.0 kHz 10 Hz to 15.7 kHz 200k 100k 50k Noise Figure is Defined as: NF + 20 log10 20k 10k 0.5 dB 1.0 dB 2.0 dB 3.0 dB 5.0 dB 200 100 10 20 30 50 70 100 200 300 ƫ en2 ) 4KTRS ) In 2RS2 1ń2 4KTRS en = Noise Voltage of the Transistor referred to the input. (Figure 3) In = Noise Current of the Transistor referred to the input. (Figure 4) K = Boltzman’s Constant (1.38 x 10−23 j/°K) T = Temperature of the Source Resistance (°K) RS = Source Resistance (Ohms) 5.0k 2.0k 1.0k 500 ƪ 500 700 1.0k IC, COLLECTOR CURRENT (mA) Figure 5. Wideband www.onsemi.com 3 BCW30LT1G, SBCW30LT1G TYPICAL STATIC CHARACTERISTICS h FE, DC CURRENT GAIN 500 TJ = 125°C 25°C 300 -55°C 200 180 BCW29LT1 VCE = 1.0 V VCE = 10 V 160 140 0.003 0.005 0.01 0.02 0.03 0.05 0.07 0.1 0.2 0.3 0.5 0.7 1.0 2.0 IC, COLLECTOR CURRENT (mA) 3.0 5.0 7.0 10 20 30 50 70 100 100 1.0 TA = 25°C BCW29LT1 IC, COLLECTOR CURRENT (mA) VCE , COLLECTOR-EMITTER VOLTAGE (VOLTS) Figure 6. DC Current Gain 0.8 IC = 1.0 mA 0.6 10 mA 50 mA 100 mA 0.4 0.2 0 0.002 0.005 0.01 0.02 0.05 0.1 0.2 0.5 1.0 2.0 IB, BASE CURRENT (mA) TA = 25°C PULSE WIDTH = 300 ms 80 DUTY CYCLE ≤ 2.0% 200 mA 150 mA 40 100 mA 20 20 50 mA 0 5.0 10 15 20 25 30 35 VCE, COLLECTOR-EMITTER VOLTAGE (VOLTS) θV, TEMPERATURE COEFFICIENTS (mV/°C) 1.2 V, VOLTAGE (VOLTS) 40 Figure 8. Collector Characteristics TJ = 25°C 1.0 0.8 VBE(sat) @ IC/IB = 10 0.6 VBE(on) @ VCE = 1.0 V 0.4 0.2 VCE(sat) @ IC/IB = 10 0 0.5 1.0 2.0 5.0 10 20 IC, COLLECTOR CURRENT (mA) 250 mA 60 0 5.0 10 1.4 0.2 350 mA 300 mA Figure 7. Collector Saturation Region 0.1 IB = 400 mA 50 1.6 *APPLIES for IC/IB ≤ hFE/2 0.8 *qVC for VCE(sat) 0 - 55°C to 25°C 0.8 25°C to 125°C 1.6 2.4 0.1 100 25°C to 125°C Figure 9. “On” Voltages qVB for VBE 0.2 - 55°C to 25°C 1.0 2.0 5.0 10 20 0.5 IC, COLLECTOR CURRENT (mA) Figure 10. Temperature Coefficients www.onsemi.com 4 50 100 BCW30LT1G, SBCW30LT1G TYPICAL DYNAMIC CHARACTERISTICS 1000 700 500 500 VCC = 3.0 V IC/IB = 10 TJ = 25°C 300 ts 300 200 100 70 50 t, TIME (ns) t, TIME (ns) 200 30 tr 20 10 7.0 5.0 1.0 100 70 50 tf 30 td @ VBE(off) = 0.5 V 20 2.0 3.0 20 30 5.0 7.0 10 IC, COLLECTOR CURRENT (mA) 50 70 10 -1.0 100 - 2.0 - 3.0 - 5.0 - 7.0 -10 - 20 - 30 IC, COLLECTOR CURRENT (mA) - 50 - 70 -100 Figure 12. Turn−Off Time 500 10 TJ = 25°C TJ = 25°C 7.0 VCE = 20 V 300 Cib C, CAPACITANCE (pF) f, T CURRENT-GAIN — BANDWIDTH PRODUCT (MHz) Figure 11. Turn−On Time 5.0 V 200 100 5.0 3.0 2.0 Cob 70 50 0.5 0.7 1.0 2.0 3.0 5.0 7.0 10 20 30 1.0 0.05 50 0.1 0.2 0.5 1.0 2.0 5.0 IC, COLLECTOR CURRENT (mA) VR, REVERSE VOLTAGE (VOLTS) Figure 13. Current−Gain — Bandwidth Product Figure 14. Capacitance hfe ≈ 300 @ IC = -1.0 mA 7.0 5.0 VCE = -10 Vdc f = 1.0 kHz TA = 25°C hoe, OUTPUT ADMITTANCE (m mhos) 10 3.0 2.0 1.0 0.7 0.5 0.3 0.2 0.1 10 20 50 200 20 hie , INPUT IMPEDANCE (k Ω ) VCC = - 3.0 V IC/IB = 10 IB1 = IB2 TJ = 25°C 100 70 50 30 20 VCE = 10 Vdc f = 1.0 kHz TA = 25°C hfe ≈ 300 @ IC = 1.0 mA 10 7.0 5.0 3.0 0.2 0.5 20 1.0 2.0 5.0 10 IC, COLLECTOR CURRENT (mA) 50 2.0 0.1 100 Figure 15. Input Impedance 0.2 0.5 20 1.0 2.0 5.0 10 IC, COLLECTOR CURRENT (mA) Figure 16. Output Admittance www.onsemi.com 5 50 100 r(t) TRANSIENT THERMAL RESISTANCE (NORMALIZED) BCW30LT1G, SBCW30LT1G 1.0 0.7 0.5 D = 0.5 0.3 0.2 0.2 0.1 0.1 0.07 0.05 FIGURE 19 0.05 P(pk) 0.02 0.03 0.02 t1 0.01 0.01 0.01 0.02 SINGLE PULSE 0.05 0.1 0.2 0.5 1.0 t2 2.0 5.0 10 20 50 t, TIME (ms) 100 200 DUTY CYCLE, D = t1/t2 D CURVES APPLY FOR POWER PULSE TRAIN SHOWN READ TIME AT t1 (SEE AN-569) ZqJA(t) = r(t) • RqJA TJ(pk) - TA = P(pk) ZqJA(t) 500 1.0k 2.0k 5.0k 10k 20k 50k 100k Figure 17. Thermal Response 104 DESIGN NOTE: USE OF THERMAL RESPONSE DATA IC, COLLECTOR CURRENT (nA) VCC = 30 V A train of periodical power pulses can be represented by the model as shown in Figure 19. Using the model and the device thermal response the normalized effective transient thermal resistance of Figure 17 was calculated for various duty cycles. To find ZqJA(t), multiply the value obtained from Figure 17 by the steady state value RqJA. 103 ICEO 102 101 ICBO AND ICEX @ VBE(off) = 3.0 V 100 Example: The BCW29LT1 is dissipating 2.0 watts peak under the following conditions: t1 = 1.0 ms, t2 = 5.0 ms (D = 0.2) Using Figure 17 at a pulse width of 1.0 ms and D = 0.2, the reading of r(t) is 0.22. 10-1 10-2 -4 0 -2 0 0 The peak rise in junction temperature is therefore DT = r(t) x P(pk) x RqJA = 0.22 x 2.0 x 200 = 88°C. + 20 + 40 + 60 + 80 + 100 + 120 + 140 + 160 TJ, JUNCTION TEMPERATURE (°C) For more information, see AN−569. Figure 18. Typical Collector Leakage Current www.onsemi.com 6 BCW30LT1G, SBCW30LT1G PACKAGE DIMENSIONS SOT−23 (TO−236) CASE 318−08 ISSUE AR D NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. CONTROLLING DIMENSION: MILLIMETERS. 3. MAXIMUM LEAD THICKNESS INCLUDES LEAD FINISH. MINIMUM LEAD THICKNESS IS THE MINIMUM THICKNESS OF THE BASE MATERIAL. 4. DIMENSIONS D AND E DO NOT INCLUDE MOLD FLASH, PROTRUSIONS, OR GATE BURRS. 0.25 3 E 1 2 T HE DIM A A1 b c D E e L L1 HE T L 3X b L1 VIEW C e TOP VIEW A A1 SIDE VIEW c SEE VIEW C MIN 0.89 0.01 0.37 0.08 2.80 1.20 1.78 0.30 0.35 2.10 0° MILLIMETERS NOM MAX 1.00 1.11 0.06 0.10 0.44 0.50 0.14 0.20 2.90 3.04 1.30 1.40 1.90 2.04 0.43 0.55 0.54 0.69 2.40 2.64 −−− 10 ° MIN 0.035 0.000 0.015 0.003 0.110 0.047 0.070 0.012 0.014 0.083 0° INCHES NOM 0.039 0.002 0.017 0.006 0.114 0.051 0.075 0.017 0.021 0.094 −−− MAX 0.044 0.004 0.020 0.008 0.120 0.055 0.080 0.022 0.027 0.104 10° STYLE 6: PIN 1. BASE 2. EMITTER 3. COLLECTOR END VIEW RECOMMENDED SOLDERING FOOTPRINT* 3X 2.90 3X 0.90 0.95 PITCH 0.80 DIMENSIONS: MILLIMETERS *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor 19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: [email protected] ◊ N. American Technical Support: 800−282−9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81−3−5817−1050 www.onsemi.com 7 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative BCW30LT1/D