Hittite HMC746LC3C 13 gbps, fast rise time and/nand/or/nor gate, w/ programmable output voltage & positive supply Datasheet

HMC746LC3C
v03.1209
13 Gbps, FAST RISE TIME AND/NAND/OR/NOR GATE,
w/ PROGRAMMABLE OUTPUT VOLTAGE & POSITIVE SUPPLY
HIGH SPEED LOGIC - SMT
3
Typical Applications
Features
The HMC746LC3C is ideal for:
Supports High Data Rates: up to 13 Gbps
• RF ATE Applications
Differential & Singe-Ended Operation
• Broadband Test & Measurement
Fast Rise and Fall Times: 22 / 21 ps
• Serial Data Transmission up to 13 Gbps
Low Power Consumption: 230 mW typ.
• Digital Logic Systems up to 13 GHz
Programmable Differential
Output Voltage Swing: 600 - 1100 mV
• NRZ-to-RZ Conversion
Propagation Delay: 95 ps
Single Supply: +3.3V
16 Lead Ceramic 3x3mm SMT Package: 9mm2
Functional Diagram
General Description
The HMC746LC3C is an AND/NAND/OR/NOR function designed to support data transmission rates
of up to 13 Gbps, and clock frequencies as high
as 13 GHz. The HMC746LC3C may be easily configured to provide any of the following logic functions:
AND, NAND, OR and NOR. The HMC746LC3C also
features an output level control pin, VR, which allows
for loss compensation or for signal level optimization.
All input and output signals to the HMC746LC3C are
terminated with 50 Ohms to Vcc on-chip, and may
be either AC or DC coupled. Inputs and outputs can
be connected directly to a 50 Ohm to Vcc terminated
system, while DC blocking capacitors may be used
if the terminating system is 50 Ohms to ground. The
HMC746LC3C operates from a single +3.3V DC supply,
and is available in a ceramic RoHS compliant 3x3 mm
SMT package.
Electrical Specifications, TA = +25 °C, Vcc = +3.3V
Parameter
Conditions
Power Supply Voltage
Typ.
Max
3.0
3.3
3.6
Units
V
Power Supply Current
70
mA
Maximum Data Rate
13
Gbps
Maximum Clock Rate
13
GHz
Input High Voltage
2.8
3.8
V
Input Low Voltage
2.1
3.3
V
Input Return Loss
Output Amplitude
Output High Voltage
3-1
Min.
Frequency <13 GHz
10
dB
Single-Ended, peak-to-peak
550
mVp-p
Differential, peak-to-peak
1100
mVp-p
3.25
V
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
HMC746LC3C
v03.1209
13 Gbps, FAST RISE TIME AND/NAND/OR/NOR GATE,
w/ PROGRAMMABLE OUTPUT VOLTAGE & POSITIVE SUPPLY
Electrical Specifications, (continued)
Conditions
Min.
Typ.
Max
Units
2
Output Rise / Fall Time
Output Return Loss
V
Differential, 20% - 80%
22 / 21
ps
Frequency <13 GHz
10
dB
27
dB
Small Signal Gain
Random Jitter Jr
rms
0.2
peak-to-peak, 215 -1 PRBS input [1]
Deterministic Jitter, Jd
Propagation Delay, td
ps rms
2
ps, p-p
95
ps
[1] Deterministic jitter calculated by simultaneously measuring the jitter of a 300 mV, 13 GHz, 215 -1 PRBS input, and a single-ended output
DC Current vs. Supply Voltage
Output Differential
vs. Supply Voltage [1] [2]
[1] [2]
85
1200
1175
DIFFERENTIAL VOLTAGE (mV)
DC CURRENT (mA)
80
+25C
+85C
-40C
75
70
65
60
55
2.9
3
3.1
3.2
3.3
3.4
SUPPLY VOLTAGE (V)
3.5
3.6
1075
1050
1025
3
3.1
3.2
3.3
3.4
3.5
3.6
3.7
Output Differential vs. Frequency [1]
25
1300
1200
OUTPUT DIFFERENTIAL (mV)
23
RISE/FALL TIME (ps)
1100
SUPPLY VOLTAGE (V)
Rise / Fall Time vs. Supply Voltage [2]
21
tr
tf
19
17
15
2.9
1125
1000
2.9
3.7
+25C
+85C
-40C
1150
3
HIGH SPEED LOGIC - SMT
Parameter
Output Low Voltage
1100
1000
900
800
700
600
3
[1] VR = +3.3V
3.1
3.2
3.3
3.4
3.5
SUPPLY VOLTAGE (V)
3.6
3.7
2
4
6
8
10
12
14
16
18
FREQUENCY (GHz)
[2] Frequency = 13 GHz
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
3-2
HMC746LC3C
v03.1209
13 Gbps, FAST RISE TIME AND/NAND/OR/NOR GATE,
w/ PROGRAMMABLE OUTPUT VOLTAGE & POSITIVE SUPPLY
Rise / Fall Time vs. VR [2]
Output Differential vs. VR [2]
25
1200
23
RISE/FALL TIME (ps)
+25C
+85C
-40C
1000
800
600
400
2.1
2.3
2.5
2.7
2.9
3.1
3.3
3.5
19
tr
tf
17
15
2.1
3.7
2.3
2.5
2.7
2.9
3.1
3.3
3.5
3.7
VR (V)
Input Return Loss vs. Frequency
Output Return Loss vs. Frequency
-10
0
-5
RETURN LOSS (dB)
-15
-10
-15
-20
-20
-25
-30
-25
-30
-35
0
2
4
6
8
10
FREQUENCY (GHz)
[1] VR = +3.3V
3-3
21
VR (V)
RETURN LOSS (dB)
HIGH SPEED LOGIC - SMT
3
DIFFERENTIAL VOLTAGE (mV)
1400
12
14
0
2
4
6
8
10
12
14
FREQUENCY (GHz)
[2] Frequency = 13 GHz
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
HMC746LC3C
v03.1209
13 Gbps, FAST RISE TIME AND/NAND/OR/NOR GATE,
w/ PROGRAMMABLE OUTPUT VOLTAGE & POSITIVE SUPPLY
Eye Diagram
3
HIGH SPEED LOGIC - SMT
[1] Test Conditions:
Pattern generated with an Agilent N4903A Serial BERT.
Eye Diagram presented on a Tektronix CSA 8000.
Device input = 13 Gbps PN code.
Device is AC coupled to scope.
Timing Diagram
Truth Table
Input
Notes:
A = AP - AN
B = BP - BN
D = DP - DN
Outputs
A
B
D
L
L
L
L
H
L
H
L
L
H
H
H
H - Positive voltage level
L - Negative voltage level
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
3-4
HMC746LC3C
v03.1209
13 Gbps, FAST RISE TIME AND/NAND/OR/NOR GATE,
w/ PROGRAMMABLE OUTPUT VOLTAGE & POSITIVE SUPPLY
Absolute Maximum Ratings
HIGH SPEED LOGIC - SMT
3
Power Supply Voltage (Vcc)
-0.5V to +3.7V
Input Signals
Vcc - 2V to Vcc + 0.5V
Output Signals
+1V to +3.7V
Storage Temperature
-65°C to +150°C
Operating Temperature
-40°C to +85°C
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Outline Drawing
NOTES:
1. PACKAGE BODY MATERIAL: ALUMINA
2. LEAD AND GROUND PADDLE PLATING:
30-80 MICROINCHES GOLD OVER 50 MICROINCHES MINIMUM NICKEL.
3. DIMENSIONS ARE IN INCHES [MILLIMETERS].
4. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm DATUM -C6. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND.
7. PADDLE MUST BE SOLDERED TO GND.
3-5
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
HMC746LC3C
v03.1209
13 Gbps, FAST RISE TIME AND/NAND/OR/NOR GATE,
w/ PROGRAMMABLE OUTPUT VOLTAGE & POSITIVE SUPPLY
Pin Descriptions
Function
Description
1, 4, 5,
8, 9, 12
GND
Signal Grounds
2, 3
AN, AP
Clock / Data Input A
6, 7
BN, BP
Clock / Data Input B
10, 11
DP, DN
Clock / Data Output
13, 16
Vcc
Positive Supply
14,
Package Base
GND
Supply Ground
15
VR
Output level control. Output level may be
adjusted by applying a voltage to VR per
“Output Differential vs. VR” plot.
Interface Schematic
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
3
HIGH SPEED LOGIC - SMT
Pin Number
3-6
HMC746LC3C
v03.1209
13 Gbps, FAST RISE TIME AND/NAND/OR/NOR GATE,
w/ PROGRAMMABLE OUTPUT VOLTAGE & POSITIVE SUPPLY
Evaluation PCB
HIGH SPEED LOGIC - SMT
3
Item
Description
J1
AN
J2
AP
J3
BN
J4
BP
J5
DP
J6
DN
J7
GND
J8
VR
J9
Vcc
List of Materials for Evaluation PCB 122517 [1]
Item
Description
J1 - J6
PCB Mount SMA RF Connectors
J7 - J9
DC Pin
JP1
Shorting Jumper
C1, C2
4.7 µF Capacitor, Tantalum
C3 - C5
100 pF Capacitor, 0402 Pkg.
R2
10 Ohm Resistor, 0603 Pkg.
U1
HMC746LC3C
High Speed Logic, AND / NAND / OR / NOR
PCB [2]
122515 Evaluation Board
[1] Reference this number when ordering complete evaluation PCB
The circuit board used in the application should use
RF circuit design techniques. Signal lines should
have 50 Ohm impedance while the package ground leads should be connected directly to the
ground plane similar to that shown. The exposed
package base should be connected to GND. A
sufficient number of via holes should be used to
connect the top and bottom ground planes. The
evaluation circuit board shown is available from
Hittite upon request.
[2] Circuit Board Material: Arlon 25FR
3-7
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
HMC746LC3C
v03.1209
13 Gbps, FAST RISE TIME AND/NAND/OR/NOR GATE,
w/ PROGRAMMABLE OUTPUT VOLTAGE & POSITIVE SUPPLY
Application Circuit
HIGH SPEED LOGIC - SMT
3
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343
Fax: 978-250-3373
Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or [email protected]
3-8
Similar pages