PRELIMINARY SPECIFICATIONS Model: FXU-HC52 SERIES HCMOS 5 x 3.2mm 2.5V Oscillator Freq: 0.016 MHz to 167 MHz* Rev. 02/12/2014 Features ULTRA Low Jitter Low Cost XPRESS Delivery Frequency Resolution to six decimal places Stabilities to ± 20 PPM -20 to +70°C or -40 to +85°C operating temperatures Tri-State Enable / Disable Feature Industry Standard Package, Footprint & Pin-Out Fully RoHS compliant Gold over Nickel Termination Finish Serial ID with Comprehensive Traceability V DD Enable / Disable FOX X PRESSO OUTPUT ASICs Applications ANY application requiring a high performance HCMOS oscillator SONET Ethernet Storage Area Network Broadband Access Microprocessors / DSP / FPGA Industrial Controllers Test and Measurement Equipment GND For more information -- Click on the drawing Contents Description page The Fox XPRESSO-ULTRA Crystal Oscillator is a breakthrough in configurable Frequency Control Solutions. XPRESSO-ULTRA utilizes a family of proprietary ASICs, designed and developed by Fox, with a key focus on noise reduction technologies. The 4th order Delta Sigma Modulator reduces noise to the levels that are comparable to traditional Bulk Quartz and SAW oscillators. The ASICs family has the ability to select the output type and supply voltage. With the XPRESSO-ULTRA lead-time, low cost, low noise, wide frequency range, excellent ambient performance, XPRESSO-ULTRA is an excellent choice over the conventional technologies. Model Selection & Part Number Guide 2 Electrical Characteristic 3 Absolute Maximums 3 Output Wave Characteristics 4 Phase Noise 5 Jitter 5 Pin Assignment 6 Recommended Circuit 6 Reflow 6 Mechanical Drawing and Pad Layout 7 Tape and Reel Specification 8 Label 8 Traceability – LOT Number & Serial Identification 9 Mechanical Test 10 11 Other XPRESSO Series Links Fox Contact Information 11 Finished XPRESSO-ULTRA parts are 100% final tested. Note * – Higher frequencies are available. Contact Fox Technical Support for details. Page 1 of 11 Fox Electronics 5570 Enterprise Parkway Fort Myers, Florida 33905 USA +1.239.693.0099 FAX +1.239.693.1554 An Integrated Device Technology, Inc. company FOXonline.com PRELIMINARY SPECIFICATIONS FXU-HC52 Series Output Wave Characteristics Parameters Low Output Voltage High Output Voltage Output Symmetry @ 50% VDD Level (See Drawing Below) Output Enable (PIN # 1) Voltage Output Disable (PIN # 1) Voltage Cycle Rise Time (10%~90%VDD - See Drawing Below) Cycle Fall Time (90%~10%VDD - See Drawing Below) Maximum Value Symbol Condition (unless otherwise noted) VOL VOH 0.016 MHz to 167 MHz 0.016 MHz to 167 MHz 0.016 to 62.5 MHz 62.5+ to 167 MHz 10%VDD 90%VDD Minimum 45% ~ 55% 40% ~ 60% ≥ 70% VDD ≤ 30% VDD TR 0.016 to 167 MHz 2.0 nS Typical TF 0.016 to 167 MHz 1.0 nS Typical VIH VIL Rise Time / Fall Time Measurements 10% to 90% 0V to VDD 30% to 70% 20% to 80% 90% - 10% 10% - 90% Rise Time 80 - 20 Times Fall Time Oscillator Symmetry Off Time 1/2 Period On Time 1/2 Period 50% VDD Period Ideally, Symmetry should be 50/50 -- Other expressions are 45/55 or 55/45 Page 4 of 11 © 2014 FOX ELECTRONICS | ISO9001:2008 Certified An Integrated Device Technology, Inc. company 70 - 30 Times PRELIMINARY SPECIFICATIONS FXU-HC52 Series Phase Noise (typical measurements at 125 MHz) . HCMOS Phase Jitter (typical measurement at 125 MHz) Frequency 125 MHz Phase Jitter (pS) 0.36 (per SONET OC-48: 12kHz to 20 MHz) Phase Jitter is integrated from Agilent 5052A Signal Noise Analyzer; measured directly into 50 ohm input; VDD =2.5V. ) Page 5 of 11 © 2014 FOX ELECTRONICS | ISO9001:2008 Certified An Integrated Device Technology, Inc. company PRELIMINARY SPECIFICATIONS FXU-HC52 Series Pin Description and Recommended Circuit Pin # 1 2 3 4 Name E/D1 GND Output VDD 2 Type Input Ground Output Power Function Enable / Disable Control of Output (0 = Disabled) Electrical Ground for VDD HCMOS Oscillator Output Power Supply Source Voltage Test Points N. C. Hi Z No Connection (Factory Use ONLY) NOTES: 1 Includes pull-up resistor to VDD to provide output when the pin (1) is No Connect. 2 Installation should include a 0.01µF bypass capacitor placed between VDD (Pin 4) and GND (Pin 2) to minimize power supply line noise. 4 VDD TP TP N. C. GND 2 3 E/D 1 N. C. Output Terminations as viewed from the Top NOTE: XPRESSO-Ultra HCMOS XOs are designed to fit on Industry Standard, 4 pad layouts Enable / Disable Control Pin # 1 (state) Output (Pin #3) OPEN (No Connection) “1” Level VIH ≥ 70% VDD “0” Level VIL ≤ 30% VDD ACTIVE Output ACTIVE Output High Impedance Soldering Reflow Profile (2 times Maximum at 260°C for 10 seconds MAX) tp 260°C 225°C Ramp-Up 3°C/s Max 50±10 Seconds Above 225°C Reflow Area 180°C 160°C 25°C 10 Seconds Max within 5°C of 260°C peak 120 ± 20 Seconds In Pre-heating Area 400 Seconds MAX from +25°C to 260°C peak Page 6 of 11 © 2014 FOX ELECTRONICS | ISO9001:2008 Certified An Integrated Device Technology, Inc. company Ramp Down Not to exceed 6°C/s PRELIMINARY SPECIFICATIONS FXU-HC52 Series Mechanical Dimensional Drawing & Pad Layout Actual part marking is depicted. See Traceability (pg. 9) for more information NOTE: XPRESSO-ULTRA HCMOS XOs are designed to fit on Industry Standard, 4 pad layouts Pin Connections #1) E/D #3) Output #2) GND #4) VDD *TP are test points and are NC. Drawing is for reference to critical specifications defined by size measurements. Certain non-critical visual attributes, such as side castellations, reference pin shape, etc. may vary Page 7 of 11 © 2014 FOX ELECTRONICS | ISO9001:2008 Certified An Integrated Device Technology, Inc. company PRELIMINARY SPECIFICATIONS FXU-HC52 Series Tape and Reel Dimensions 4.0mm Ø1.5mm 7.5mm 5.5mm 16mm 12mm 2.15mm 8.0mm 2k Reel Dimensions in mm 1k Reel Dimensions in mm 2.0 2.0 Ø13.0 Ø21.0 178.0 62.0 120° Ø21.0 Ø13.0 2.0 2.0 255.0 80.0 2.0 17.5 17.5 Labeling (Reels and smaller packaging are labeled with the below) 851A-125-3 Fox Part Number: 851A-125-3 Quantity: Description: Date Code 2000 pieces FXU-HC525R-125-5 FXU-HC525R-125 1335 1335 th (YYWW 2013 35 wk) LOT # 24435 If traceability should become necessary An additional identification code is contained internally if tracking should ever be necessary Page 8 of 11 © 2014 FOX ELECTRONICS | ISO9001:2008 Certified An Integrated Device Technology, Inc. company PRELIMINARY SPECIFICATIONS FXU-HC52 Series Traceability – LOT Number & Serial Identification LOT Number The LOT Number has direct ties to the customer purchase order. The LOT Number is marked on the “Reel” label, and also stored internally on non-volatile memory inside the XPRESSO-ULTRA part. XPRESSO-ULTRA parts that are shipped Tape and Reel, are also placed in an Electro Static Discharge (ESD) bag and will have the LOT Number labeled on the exterior of the ESD bag. It is recommended that the XPRESSO-ULTRA parts remain in this ESD bag during storage for protection and identification. If the parts become separated from the label showing the LOT Number, it can be retrieved from inside one of the parts, and the information that can be obtained is listed below: Customer Purchase Order Number Internal Fox Sales Order Number Dates that the XPRESSO-ULTRA part was shipped from the factory The assigned customer part number The specification that the part was designed for Serial Identification The Serial ID is the individualized information about the configuration of that particular XPRESSO-ULTRA part. The Serial ID is unique for each and every XPRESSO-ULTRA part, and can be read by special Fox equipment. With the Serial ID, the below information can be obtained about that individual, XPRESSO-ULTRA part: Equipment that the XPRESSO-ULTRA part was configured on Raw material used to configure the XPRESSO-ULTRA part Traceability of the raw material back to the foundries manufacturing lot Date and Time that the part was configured Any optimized electrical parameters based on customer specifications Electrical testing of the actual completed part Human resource that was monitoring the configuration of the part Fox has equipment placed at key Fox locations World Wide to read the Lot Identification and Serial Number of any XPRESSO-ULTRA part produced and can then obtain the information from above within 24 hours Page 9 of 11 © 2014 FOX ELECTRONICS | ISO9001:2008 Certified An Integrated Device Technology, Inc. company PRELIMINARY SPECIFICATIONS FXU-HC52 Series Mechanical Testing Parameter Test Method MIL-STD-202 Method 213 Condition C Mechanical Shock MIL-STD-202 Method 204 5g's for 20 minutes 12 cycles of each 3 orientations: X, Y, Z Mechanical Vibration Under Power @ 125°C for 1000 Hours High Temperature Operating Life (HTOL) Hermetic Seal He pressure: 4 ±1 kgf / cm2 2 Hour soak Page 10 of 11 © 2014 FOX ELECTRONICS | ISO9001:2008 Certified An Integrated Device Technology, Inc. company PRELIMINARY SPECIFICATIONS FXU-HC52 Series XpressO-ULTRA Home XpressO-ULTRA XOs XpressO Brochure Patent Numbers: US 6,664,860, US 5,960,403, US 5,952,890; US 5,960,405; US 6,188,290; Foreign Patents: R.S.A. 98/0866, R.O.C. 120851; Singapore 67081, 67082; EP 0958652 China ZL 98802217.6, Malaysia MY-118540-A, Philippines 1-1998-000245, Hong Kong #HK1026079, Mexico #232179 US and Foreign Patents Pending XpressO® Fox Electronics Contact Information (USA)-Worldwide Headquarters Tel: 888-GET-2-FOX Outside US: +1.239.693.0099, Fax:+1.239.693.1554 Email: www.foxonline.com/email.htm Fox EMEA Tel: +44.1283.568153 Email: www.foxonline.com/email.htm Fox Japan Tel:+81.3.3374.2079, Fax: +81.3.3377.5221 Email: www.foxonline.com/email.htm Fox Singapore Tel:+886-2-22073427, Email: www.foxonline.com/email.htm The above specifications, having been carefully prepared and checked, is believed to be accurate at the time of publication; however, no responsibility is assumed by Fox Electronics for inaccuracies. Page 11 of 11 © 2014 FOX ELECTRONICS | ISO9001:2008 Certified An Integrated Device Technology, Inc. company