OM1321SMM OM1321NMM OM1321NKM OM1321NTM OM1321STM OM1321N2M 1.5 AMP POSITIVE ADJUSTABLE VOLTAGE REGULATOR APPROVED TO DESC DRAWING 7703402 Three Terminal, Precision Adjustable Positive Voltage Regulator In Hermetic Style Packages (LM117HV) Please see mechanical outlines herein FEATURES • • • • • Similar To Industry Standard LM117HV Approved To DESC Standardized Military Drawing Number 7703402 Built In Thermal Overload Protection Short Circuit Current Limiting Available In Six Package Styles DESCRIPTION These three terminal positive regulators are supplied in hermetically sealed packages. All protective features are designed into the circuit, including thermal shutdown, current-limiting, and safe-area control. With heat sinking, these devices can deliver up to 1.5 amps of output current. The LCC-20 device is limited to .5 amps. The unit also features output voltages that can be fixed from 1.2 volts to 57 volts using external resistors. ABSOLUTE MAXIMUM RATINGS Tc @ 25°C Power Dissipation Case 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.1 W Case-All Others. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 W Input - Output Voltage Differential . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 V Operating Junction Temperature Range . . . . . . . . . . . . . . . . . . . . . - 55°C to + 150°C Storage Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 65°C to + 150°C Lead Temperature (Soldering 10 seconds) . . . . . . . . . . . . . . . . . . . . . . . . . . . 300°C Thermal Resistance, Junction to Case: Case 2, LCC-20 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17°C/W Case U & M, TO-257 (Isol) and SMD-3 . . . . . . . . . . . . . . . . . . . . . . . . . . 4.2°C/W Case T&N, TO-257 (Non-Isol) and SMD-1 . . . . . . . . . . . . . . . . . . . . . . . 3.5°C/W Case Y, TO-3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3.0°C/W Maximum Output Current: Case 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 A Case-All Others. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.5 A Recommended Operating Conditions: Output Voltage Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.2 to 37 VDC Ambient Operating Temperature Range (TA). . . . . . . . . . . . . . . . - 55°C to + 125°C Input Voltage Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.25 to 41.25 VDC 4 11 R2 Supersedes 1 07 R1 3.5 - 5 3.5 OM1321NTM, OM1321STM, OM1321NKM, OM1321SMM, OM1321NMM, OM1321N2M ELECTRICAL CHARACTERISTICS -55°C ≤ TA ≤ 125°C, IL = 8mA (unless otherwise specified) OM1321NTM, OM1321STM, OM1321NKM, OM1321SMM, OM1321NMM Parameter Symbol Test Conditions Min. Max. Reference Voltage VREF VDIFF = 3.0V, TA = 25°C 1.20 1.30 1.20 1.30 1.20 1.30 1.20 1.30 VDIFF = 3.3V VDIFF = 40V VDIFF = 60V Line Regulation RLINE 3.0V ≤ VDIFF ≤ 40V, Vout = Vref, TA = 25°C 3.3V ≤ VDIFF ≤ 40V, Vout = Vref (Note 1) • • • • 40V ≤ VDIFF ≤ 60V, Vout = Vref, TA = 25°C 40V ≤ VDIFF ≤ 60V, Vout = Vref Load Regulation RLOAD VDIFF = 3.3V, 10mA ≤ IL ≤ 1.5A (Note 1) • VDIFF = 3.0V, 10mA ≤ IL ≤ 1.5A, TA = 25°C • VDIFF = 40V, 10mA ≤ IL ≤ 300mA, TA = 25°C VDIFF = 40V, 10mA ≤ IL ≤ 195mA VDIFF = 60V, 10mA ≤ IL ≤ 30mA Thermal Regulation • • Vin = 14.6V, IL = 1.5A VRTH -9 9 -23 23 -5 5 -10 10 -15 15 -15 15 -15 15 -15 15 -15 15 -16 16 Unit V mV mV mV Pd = 20 Watts, t = 20 ms, TA = 25°C Ripple Rejection RN f = 120 Hz, Vout = Vref • Adjustment Pin Current VDIFF = 3.0V, TA = 25°C IAdj VDIFF = 3.3V VDIFF = 40V VDIFF = 60V Adjustment Pin ∆IAdj dB 100 • • • VDIFF = 3.0V, 10mA ≤ IL ≤ 1.5A, TA = 25°C VDIFF = 3.3V, 10mA ≤ IL ≤ 1.5A Current Change VDIFF = 40V, 10mA ≤ IL ≤ 195mA • • 3.0V ≤ VDIFF ≤ 40V, TA = 25°C 3.3V ≤ VDIFF ≤ 40V 3.3V ≤ VDIFF ≤ 60V Miminum Load Current ILmin 100 • • 100 VDIFF = 40V, Vout = 1.4V (forced) VDIFF = 60V, Vout = 1.4V (forced) VDIFF = 5V ICL (Note 2) 5 -5 5 -5 5 -5 5 -5 5 -5 5 -5 VDIFF = 3.0V, Vout = 1.4V (forced) VDIFF = 3.3V, Vout = 1.4V (forced) µA 100 -5 VDIFF = 40V, 10mA ≤ IL ≤ 300mA, TA = 25°C Current Limit 66 CAdj = 10 µF, Iout = 100 mA (Note 2) µA 5 5.0 • • • • 5.0 mA 5.0 7.0 1.5 3.5 VDIFF = 40V, TA = 25°C 0.3 1.5 VDIFF = 60V, TA = 25°C 0.05 0.50 A Notes: 1. Load and Line Regulation are specified at a constant junction temperature. Pulse testing with low duty cycle is used. Changes in output voltage due to heating effects must be taken into account separately. 2. If not tested, shall be guaranteed to the specified limits. 3. The • denotes the specifications which apply over the full operating temperature range. 3.5 PART NUMBER DESIGNATOR Standard Military Drawing Number Omnirel Part Number 7703402M 7703402U 7703402T 7703402Y 7703402N 77034022 OM1321SMM OM1321STM OM1321NTM OM1321 NKM OM1321NMM OM1321N2M 3.5 - 6 Omnirel Package Designation SMD-3 TO-257 (Isolated) TO-257 (non-Isolated) TO-3 SMD-1 LCC-20 OM1321NTM, OM1321STM, OM1321NKM, OM1321SMM, OM1321NMM, OM1321N2M ELECTRICAL CHARACTERISTICS -55°C ≤ TA ≤ 125°C, IL = 8mA (unless otherwise specified) OM1321N2M Parameter Symbol Test Conditions Min. Max. Reference Voltage VREF VDIFF = 3.0V, TA = 25°C 1.20 1.30 1.20 1.30 1.20 1.30 1.20 1.30 VDIFF = 3.3V VDIFF = 40V VDIFF = 60V Line Regulation RLINE 3.0V ≤ VDIFF ≤ 40V, Vout = Vref, TA = 25°C 3.3V ≤ VDIFF ≤ 40V, Vout = Vref (Note 1) • • • • -9 9 -23 23 -5 5 40V ≤ VDIFF ≤ 60V, Vout = Vref, TA = 25°C 40V ≤ VDIFF ≤ 60V, Vout = Vref Load Regulation RLOAD VDIFF = 3.3V, 10mA ≤ IL ≤ 500 mA (Note 1) • VDIFF = 3.0V, 10mA ≤ IL ≤ 500 mA, TA = 25°C • VDIFF = 40V, 10mA ≤ IL ≤ 150 mA, TA = 25°C VDIFF = 40V, 10mA ≤ IL ≤ 100 mA VDIFF = 60V, 10mA ≤ IL ≤ 20 mA Thermal Regulation VRTH • • Vin = 14.6V, IL = 300 mA -10 10 -15 15 -15 15 -15 15 -15 15 -15 15 -3.1 3.1 Unit V mV mV mV Pd = 4.0 Watts, t = 20 ms, TA = 25°C Ripple Rejection RN f = 120 Hz, Vout = Vref Adjustment Pin Current 66 VDIFF = 3.0V, TA = 25°C IAdj VDIFF = 3.3V VDIFF = 40V VDIFF = 60V Adjustment Pin • ∆IAdj 100 • • • 100 100 -5 • VDIFF = 40V, 10mA ≤ IL ≤ 150 mA, TA = 25°C VDIFF = 40V, 10mA ≤ IL ≤ 100 mA • 3.0V ≤ VDIFF ≤ 40V, TA = 25°C 3.3V ≤ VDIFF ≤ 40V 3.3V ≤ VDIFF ≤ 60V ILmin VDIFF = 40V, Vout = 1.4V (forced) VDIFF = 60V, Vout = 1.4V (forced) Current Limit VDIFF = 5V ICL (Note 2) • • 5 -5 5 -5 5 -5 5 -5 5 -5 5 -5 VDIFF = 3.0V, Vout = 1.4V (forced) VDIFF = 3.3V, Vout = 1.4V (forced) µA 100 VDIFF = 3.0V, 10mA ≤ IL ≤ 500 mA, TA = 25°C VDIFF = 3.3V, 10mA ≤ IL ≤ 500 mA Current Change Miminum Load Current dB CAdj = 10 µF, Iout = 100 mA (Note 2) µA 5 5.0 • • • • 5.0 mA 5.0 7.0 0.5 1.65 VDIFF = 40V, TA = 25°C 0.15 0.65 VDIFF = 60V, TA = 25°C 0.02 0.28 A Notes: Please see previous page. STANDARD APPLICATION * Cin is required if regulator is located an appreciable distance from power supply filter. ** Co is not needed for stability, however it does improve transient response. R Vout = 1.25 V (1 + 2 )+ IAd j R2 R1 Since IAdj is controlled to less than 100 µA, the error associated with this term is negligible in most applications. 3.5 - 7 Vout Vin OM1321STM 3.5 R1 240Ω IAdj Adjust Co** 1.0 µF Cin* 0.1 µF R2 OM1321NTM, OM1321STM, OM1321NKM, OM1321SMM, OM1321NMM, OM1321N2M MECHANICAL OUTLINE .425M .200M .190M 1 M .045M .035M .100M .200M 3 M .420M .410M .425M .035 WIDEM FLAT 3 PLCS.M 2 .665M .645M .150M .140M .537M .527M M M .350 MIN.M .430M .410M 1 2 3 ± .020M .115M .160M .020M .080 M .038 MAX.M OM1321SMM .750M .500M .120 TYP.M .100 TYP.M .035M .025M Front View Pin 1 - Adjust Pin 2 - Input Pin 3 - Output Tab - Isolated M .005M .140 .015 OM1321NTM Non-Isolated Front View Pin 1 - Adjust Pin 2 - Output Pin 3 - Input Tab - Isolated Front View Pin 1 - Adjust Pin 2 - Output Pin 3 - Input Tab - Output .140 1 2 .075 .157 OM1321STM Isolated .140 .075 .415 3 .062 .375 .030 MIN. OM1321NMM Pin 1 - Adjust Pin 2 - Input Pin 3 - Output 1.197 1.53 REF. 1.177 0.875 MAX. 0.675 0.655 0.188 R. MAX. 0.135 MAX. 0.450 0.250 0.043 0.038 (±.003) 2 1 0.161 0.151 Pin 1 - Adjust Pin 2 - Input Case - Output .075 (±.010) TYP. 4 .010 3 9 .160 SQ. REF. 1 13 19 .025 SQ. TYP. .003 0.225 0.205 .040 .085 0.525 R. MAX. 18 14 .050 TYP. .050 (±.005) TYP. 2 PLCS. OM1321NKM 3.5 .020 X45° REF. 0.440 0.420 .025 TYP. 0.312 MIN. SEATING PLANE .009 R. 20 PLCS. .065 .040 X45° REF (3 PL) OM1321N2M Pin 1 Pin 2 Pin 3 Pin 4 Pin 5 Pin 6 Pin 7 Pin 8 Pin 9 Pin 10 NC NC NC NC NC NC NC NC NC NC Pin 11 Pin 12 Pin 13 Pin 14 Pin 15 Pin 16 Pin 17 Pin 18 Pin 19 Pin 20 VIN VOUT VOUT VOUT(Sense) NC NC NC Adjust NC VIN For additional information please see the mechanical outline section.