Industrial Ethernet Switch DIN-Rail Managed Gigabit Ethernet Switch v1.0a Jul, 2015 IGS-P9164 Series Features Industrial IEC 61850-3 20-port managed Gigabit Ethernet switch Industrial Ethernet Switch IGS-P9164 Series Industrial Media Converter Industrial Device Server ▪ Designed for power substation / Railway application and fully compliant with the requirement of IEC 61850-3 and IEEE 1613 ▪ Support O-Ring (recovery time < 30ms over 250 units of connection) and MSTP(RSTP/STP compatible) for Ethernet Redundancy ▪ Open-Ring support the other vendor's ring technology in open architecture ▪ O-Chain allow multiple redundant network rings ▪ Support standard IEC 62439-2 MRP*NOTE (Media Redundancy Protocol) function ▪ Support IEEE 1588v2 clock Synchronization ▪ Support IPV6 new internet protocol version ▪ Support Modbus TCP protocol ▪ Provided HTTPS/SSH protocol to enhance network security ▪ Support IEEE 802.3az Energy-Efficient Ethernet technology ▪ Support SMTP client and NTP server protocol ▪ Support IP-based bandwidth management ▪ Support application-based QoS management ▪ Support Device Binding security function ▪ Support DOS/DDOS auto prevention ▪ IGMP v2/v3 (IGMP snooping support) for filtering multicast traffic ▪ Support SNMP v1/v2c/v3 & RMON & 802.1Q VLAN Network Management ▪ Support ACL, TACACS+ and 802.1x User Authentication for security ▪ Support 9.6K Bytes Jumbo Frame ▪ Support DBU-01 backup unit to quickly backup/restore configuration ▪ Multiple notification for warning of unexpected event ▪ Support DBU-01 backup unit device to quickly backup/restore configuration ▪ Web-based ,Telnet, Console (CLI), and Windows utility (Open-Vision) configuration ▪ Support LLDP Protocol ▪ Rigid IP-30 housing design ▪ DIN-Rail and wall mounting enabled Industrial Wireless Access Point Industrial Cellular VPN Router Industrial M2M Gateway Introduction edundant ring technology can protect mission-critical application from network interruptions or temporary malfunction with its fast recover technology. *NOTE: This function is available by request only D esign ed for R u gged E xcellence Network Management Software ▪ O-Ring : O-Ring is ORing's proprietary redundant ring technology, with recovery time of less 30 milliseconds and up to 250 nodes. The O-Ring r Accessories IGS-P9164 series are IEC 61850-3 managed redundant ring Ethernet switches. These switches are designed for power substation application and rolling stock application, fully compliant with the requirement of IEC 61850-3 and IEEE 1613. IGS-P9164GF series are IEC 61850-3 managed redundant ring Ethernet switch with 16x10/100/1000Base-T(X) ports and 4x1000Base-X optical fiber port with SC connector. IGS-P9164GFX series are IEC 618503 managed redundant ring Ethernet switch with 16x10/100/1000Base-T(X) ports and 4x100Base-FX optical fiber port with SC connector. IGS-P9164GC series are IEC 61850-3 managed redundant ring Ethernet switch with 16x10/100/1000Base-T(X) ports and 4xGigabit combo ports with SFP socket. With completely support of Ethernet Redundancy protocol, O-Ring (recovery time < 30ms over 250 units of connection) and MSTP (RSTP/STP compatible) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. And support wide operating temperature from -40 oC to 75 oC. IGS-P9164GF(X) series can also be managed centralized and convenient by Open-Vision, Except the Web-based interface, Telnet and console (CLI) configuration. Therefore, the switch is one of the most reliable choice for highly-managed and Fiber Ethernet application. 1-197 Industrial Ethernet Switch DIN-Rail Managed Gigabit Ethernet Switch v1.0a Jul, 2015 ▪ Open-Ring : Open-Ring is an enhanced redundant technology that makes ORing's switches compatible with other vendor's proprietary redundant ring technologies. It enables ORing's switches to form a single ring with other vendor's switch. In cases where the ring is setup using proprietary technology, ORing offers a compatibility service where ORing can make its switches compatible with your particular network requirements. ▪ O-Chain : O-Chain is the revolutionary network redundancy technology that provides the add-on network redundancy topology for any backbone network, O-Chain allows multiple redundant network rings of different redundancy protocols to join and function together as a larger and more robust compound network topology. O-Chain providing ease-of-use while maximizing fault-recovery swiftness, flexibility, compatibility, and cost- Industrial Ethernet Switch 1 effectiveness in one set of network redundancy topology. ▪ MRP*NOTE : Media Redundancy Protocol (MRP) is a data network protocol standardized by the IEC 62439-2. It allows rings of Ethernet switches to overcome any single failure with recovery time much faster than achievable with Spanning Tree Protocol. ▪ IP-based Bandwidth Management : The switch provide advanced IP-based bandwidth management which can limit the maximum bandwidth for each IP device. User can configure IP camera and NVR with more bandwidth and limit other device bandwidth. ▪ Application-Based QoS : The switch also support application-based QoS. Application-based QoS can set highest priority for data stream according to TCP/UDP port number. ▪ Device Binding Function : ORing special Device Binding function can only permit allowed IP address with MAC address to access the network. Hacker cannot access the IP surveillance network without permission. It can avoid hacker from stealing video privacy data and attacking IP camera, NVR and controllers. ▪ Advanced DOS/DDOS Auto Prevention : The switch also provided advanced DOS/DDOS auto prevention. If there is any IP flow become big in short time, the switch will lock the source IP address for certain time to prevent the attack. It's hardware based prevention so it can prevent DOS/DDOS attack immediately and completely. ▪ IEEE 1588 Technology : The IEEE 1588 technology can fulfill precision time synchronization requirements for protection and control applications. ▪ Modbus TCP : This is a Modbus variant used for communications over TCP/IP networks. ▪ IEEE 802.3az Energy-Efficient Ethernet : This is a set of enhancements to the twisted-pair and backplane Ethernet family of networking standards that will allow for less power consumption during periods of low data activity. The intention was to reduce power consumption by 50% or more. PLC IGS-7084GCP Control Center O-Ring PLC IGS-7084GCP SCADA PLC IGS-7084GCP IP Camera Control Center IGS-7084GCP PLC SCADA SCADA IGPS-1041GTPA Control Center IDS-5042 Power Generation IGS-P9164 IMG-111 IDS-5011-WG Smart Metering Transmission Distribution *NOTE: This function is available by request only 1-198 w w w.oring - net wo rk in g.co m Industrial Ethernet Switch DIN-Rail Managed Gigabit Ethernet Switch v1.0a Jul, 2015 Industrial Ethernet Switch Dimensions Industrial Media Converter IGS-P9164GC Industrial Device Server IGS-P9164GF Industrial Wireless Access Point Industrial Cellular VPN Router IGS-P9164FX (Unit=mm) Open-Vision Industrial M2M Gateway ORing's switches are intelligent switches. Different from other traditional redundant switches, ORing provides a set of Windows utility (Open-Vision) for user to manage and monitor all of industrial Ethernet switches on the industrial network. Accessories Commander Topology View Network Management Software D esign ed for R u gged E xcellence 1-199 Industrial Ethernet Switch DIN-Rail Managed Gigabit Ethernet Switch v1.0a Jul, 2015 Specifications ORing Switch Model IGS-P9164GF-MM IGS-P9164GFX-MM IGS-P9164GF-SS IGS-P9164GFX-SS IGS-P9164GC Physical Ports 10/100/1000Base-T(X) Ports in RJ45 Auto MDI/MDIX Industrial Ethernet Switch 1 16 Gigabit Combo Port with 10/100/1000Base-T(X) and 100/1000Base-X SFP Port Fiber Ports Number Fiber Ports Standard 1000Base-SX 4 4 - 100Base-FX 1000Base-LX 100Base-FX - Fiber Mode Multi-mode Multi-mode Single-mode Single-mode - Fiber Diameter (µm) 62.5/125 µm 50/125 µm 62.5/125 µm 50/125 µm 9/125 µm 9/125 µm - SC SC SC SC - Typical Distance (km) 0.55 km 2 km 10 km 30 km - Wavelength (nm) 850 nm 1310 nm 1310 nm 1310 nm - -4 dBm -14 dBm -3 dBm -8 dBm - -9.5 dBm -23.5 dBm -9.5 dBm -15 dBm - 0 dBm 0 dBm -3 dBm 0 dBm - -18 dBm -31 dBm -20 dBm -34 dBm 8.5 dB 7.5 dB 10.5 dB 19 dB Fiber Optical Connector Fiber Ports Specifications - Max. Output Optical Power (dBm) Min. Output Optical Power (dBm) Max. Input Optical Power (Saturation) Min. Input Optical Power (Sensitivity) Link Budget (dB) Technology Ethernet Standards IEEE 802.3 for 10Base-T IEEE 802.3u for 100Base-TX and 100Base-FX IEEE 802.3ab for 1000Base-T IEEE 802.z for 1000Base-X IEEE 802.3x for Flow control IEEE 802.3ad for LACP (Link Aggregation Control Protocol ) IEEE 802.1p for COS (Class of Service) IEEE 802.1Q for VLAN Tagging IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol) IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol) IEEE 802.1x for Authentication IEEE 802.1AB for LLDP (Link Layer Discovery Protocol) MAC Table 8K Packet Buffer 4Mbits Priority Queues 8 Processing Store-and-Forward Switching latency: 7 us Switching bandwidth: 40Gbps Max. Number of Available VLANs: 4095 VLAN ID Range : VID 1 to 4094 IGMP multicast groups: 256 for each VLAN Port rate limiting: User Define Up to 9.6K Bytes Device Binding security feature Enable/disable ports, MAC based port security Port based network access control (802.1x) VLAN (802.1Q ) to segregate and secure network traffic Radius centralized password management SNMPv3 encrypted authentication and access security Https / SSH enhance network security Switch Properties Jumbo frame Security Features 1-200 w w w.oring - net wo rk in g.co m - Industrial Ethernet Switch DIN-Rail Managed Gigabit Ethernet Switch LED Indicators Green : Power LED x 3 Ring Master Indicator (R.M.) 1000Base-X Fiber Port Indicator Green : Indicates that the system is operating in O-Ring Master mode Green : Indicates that the system operating in O-Ring mode Green Blinking : Indicates that the Ring is broken. Amber : Indicate unexpected event occurred Green for Link/Act indicator. Dual color LED for speed indicator : Green for 1000Mbps indicator / Amber for 100Mbps indicator / Off light for 10Mbps indicator Green for port Link/Act.(for IGS-P9164GF series) 100Base-FX Fiber Port Indicator Green for port Link/Act.(for IGS-P9164GFX series) 100/1000Base-X SFP Port Indicator Green for port Link/Act. (for IGS-P9164GC series) O-Ring Indicator (Ring) Fault Indicator(Fault) 10/100/1000Base-T(X) RJ45 Port Indicato Relay Relay output to carry capacity of 1A at 24VDC on 3-pin terminal block Power Reverse Polarity Protection Present Power Consumption (Typ.) LV : 17Watts HV : 18Watts Industrial M2M Gateway Overload Current Protection LV model : Dual power inputs. 12~48VDC on 2-pin terminal block HV model : Dual power inputs. 85~264VAC/88~373VDC on 3-pin terminal block LV : 18Watts LV : 21Watts LV : 18Watts LV : 21Watts HV : 18.5Watts HV : 20.7Watts HV : 18.5Watts HV : 19.3Watts Present Redundant Input Power Physical Characteristics Enclosure IP-30 Dimensions (W x D x H) 115 (W) x 159 (D) x 154 (H)mm (4.53 x 6.3 x 6.06 inch) LV Model : 1780 g LV Model : 1769 g LV Model : 1780 g HV Model : 2216 g HV Model : 2205 g HV Model : 2216 g Weight (g) LV Model : 1769 g HV Model : 2205 g Industrial Cellular VPN Router Fault contact Industrial Wireless Access Point Power Indicator(PWR) Industrial Device Server RS-232 Serial Console Port Industrial Media Converter Network Redundancy STP/RSTP/MSTP (IEEE 802.1D/w/s) Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units TOS/Diffserv supported Quality of Service (802.1p) for real-time traffic VLAN (802.1Q) with VLAN tagging and GVRP supported IGMP Snooping IP-based bandwidth management Application-based QoS management DOS/DDOS auto prevention Port configuration, status, statistics, monitoring, security DHCP Server/Client/Relay SMTP Client Modbus TCP NTP server O-Ring Open-Ring O-Chain MRP*NOTE Fast Recovery MSTP (RSTP/STP compatible) RS-232 in RJ45 connector with console cable. 115200bps, 8, N, 1 Industrial Ethernet Switch Software Features v1.0a Jul, 2015 LV Model : 1750 g HV Model : 2186 G Environmental -40 to 85oC (-40 to 185oF) Operating Temperature -40 to 75oC (-40 to 167oF ) Operating Humidity 5% to 95% Non-condensing Accessories Storage Temperature Regulatory approvals IEC 61850-3, IEEE 1613 EMI FCC Part 15, CISPR (EN55022) class A, EN50155 (EN50121-3-2, EN55011, EN50121-4) EN61000-4-2 (ESD) EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11 EMS *NOTE: This function is available by request only D esign ed for R u gged E xcellence Network Management Software Power Automation 1-201 Industrial Ethernet Switch DIN-Rail Managed Gigabit Ethernet Switch Shock IEC60068-2-27 Free Fall IEC60068-2-32 Vibration IEC60068-2-6 Safety EN60950-1 LV:204,467 HV:300,460 5 years MTBF Warranty Industrial Ethernet Switch 1 LV:236,923 HV:300,460 LV:224,681 HV:281,040 LV:196,356 HV:238,082 LV:299,365 HV:408,521 Ordering Information I G S -P9 A A B CC -FF- G G Code Definition Option 10/100/1000Base-T(X) Additional Port Port Number Number - 16: 16 ports Model Name Available Model 1-202 v1.0a Jul, 2015 - 4: 4 ports Additional Port Type - GF: 1000Base-X optical fiber port - FX: 100Base-FX optical fiber port - GC: Gigabit combo port Fiber Optical Mode - MM: Multi-mode - SS: Single-mode Fiber Optical Connector - SC: SC connector Description IGS-P9164FX-MM-SC-LV Industrial IEC 61850-3 20-port managed Gigabit Ethernet switch with 16x10/100/1000Base-T(X) and 4x100Base-FX, multi-mode, 2Km/1310nm, SC connector, low-voltage power inputs IGS-P9164FX-SS-SC-LV Industrial IEC 61850-3 20-port managed Gigabit Ethernet switch with 16x10/100/1000Base-T(X) and 4x100Base-FX, single-mode, 30Km/1310nm, SC connector, low-voltage power inputs IGS-P9164FX-MM-SC-HV_US Industrial IEC 61850-3 20-port managed Gigabit Ethernet switch with 16x10/100/1000Base-T(X) and 4x100Base-FX, multi-mode, 2Km/1310nm, SC connector, high-voltage power inputs, US power cord IGS-P9164FX-MM-SC-HV_UK Industrial IEC 61850-3 20-port managed Gigabit Ethernet switch with 16x10/100/1000Base-T(X) and 4x100Base-FX, multi-mode, 2Km/1310nm, SC connector, high-voltage power inputs, UK power cord IGS-P9164FX-MM-SC-HV_EU Industrial IEC 61850-3 20-port managed Gigabit Ethernet switch with 16x10/100/1000Base-T(X) and 4x100Base-FX, multi-mode, 2Km/1310nm, SC connector, high-voltage power inputs, EU power cord IGS-P9164FX-MM-SC-HV_JP Industrial IEC 61850-3 20-port managed Gigabit Ethernet switch with 16x10/100/1000Base-T(X) and 4x100Base-FX, multi-mode, 2Km/1310nm, SC connector, high-voltage power inputs, JP power cord IGS-P9164FX-SS-SC-HV_US Industrial IEC 61850-3 20-port managed Gigabit Ethernet switch with 16x10/100/1000Base-T(X) and 4x100Base-FX, single-mode, 30Km/1310nm, SC connector, high-voltage power inputs, US power cord IGS-P9164FX-SS-SC-HV_UK Industrial IEC 61850-3 20-port managed Gigabit Ethernet switch with 16x10/100/1000Base-T(X) and 4x100Base-FX, single-mode, 30Km/1310nm, SC connector, high-voltage power inputs, UK power cord IGS-P9164FX-SS-SC-HV_EU Industrial IEC 61850-3 20-port managed Gigabit Ethernet switch with 16x10/100/1000Base-T(X) and 4x100Base-FX, single-mode, 30Km/1310nm, SC connector, high-voltage power inputs, EU power cord IGS-P9164FX-SS-SC-HV_JP Industrial IEC 61850-3 20-port managed Gigabit Ethernet switch with 16x10/100/1000Base-T(X) and 4x100Base-FX, single-mode, 30Km/1310nm, SC connector, high-voltage power inputs, JP power cord IGS-P9164GF-MM-SC-LV Industrial IEC 61850-3 20-port managed Gigabit Ethernet switch with 16x10/100/1000Base-T(X) and 4x1000Base-SX, multi-mode, 550m/850nm, SC connector, low-voltage power inputs IGS-P9164GF-SS-SC-LV Industrial IEC 61850-3 20-port managed Gigabit Ethernet switch with 16x10/100/1000Base-T(X) and 4x1000Base-LX, single-mode, 10Km/1310nm, SC connector, low-voltage power inputs IGS-P9164GF-MM-SC-HV_US Industrial IEC 61850-3 20-port managed Gigabit Ethernet switch with 16x10/100/1000Base-T(X) and 4x1000Base-SX, multi-mode, 550m/850nm, SC connector, high-voltage power inputs, US power cord IGS-P9164GF-MM-SC-HV_UK Industrial IEC 61850-3 20-port managed Gigabit Ethernet switch with 16x10/100/1000Base-T(X) and 4x1000Base-SX, multi-mode, 550m/850nm, SC connector, high-voltage power inputs, UK power cord w w w.oring - net wo rk in g.co m Industrial Ethernet Switch DIN-Rail Managed Gigabit Ethernet Switch Industrial IEC 61850-3 20-port managed Gigabit Ethernet switch with 16x10/100/1000Base-T(X) and 4x1000Base-SX, multi-mode, 550m/850nm, SC connector, high-voltage power inputs, EU power cord IGS-P9164GF-MM-SC-HV_JP Industrial IEC 61850-3 20-port managed Gigabit Ethernet switch with 16x10/100/1000Base-T(X) and 4x1000Base-SX, multi-mode, 550m/850nm, SC connector, high-voltage power inputs, JP power cord IGS-P9164GF-SS-SC-HV_US Industrial IEC 61850-3 20-port managed Gigabit Ethernet switch with 16x10/100/1000Base-T(X) and 4x1000Base-LX, single-mode, 10Km/1310nm, SC connector, high-voltage power inputs, US power cord IGS-P9164GF-SS-SC-HV_UK Industrial IEC 61850-3 20-port managed Gigabit Ethernet switch with 16x10/100/1000Base-T(X) and 4x1000Base-LX, single-mode, 10Km/1310nm, SC connector, high-voltage power inputs, UK power cord IGS-P9164GF-SS-SC-HV_EU Industrial IEC 61850-3 20-port managed Gigabit Ethernet switch with 16x10/100/1000Base-T(X) and 4x1000Base-LX, single-mode, 10Km/1310nm, SC connector, high-voltage power inputs, EU power cord IGS-P9164GF-SS-SC-HV_JP Industrial IEC 61850-3 20-port managed Gigabit Ethernet switch with 16x10/100/1000Base-T(X) and 4x1000Base-LX, single-mode, 10Km/1310nm, SC connector, high-voltage power inputs, JP power cord IGS-P9164GC-LV Industrial IEC 61850-3 20-port managed Gigabit Ethernet switch with 16x10/100/1000Base-T(X) and 4xGigabit combo ports, SFP socket, lowvoltage power inputs IGS-P9164GC-HV_US Industrial IEC 61850-3 20-port managed Gigabit Ethernet switch with 16x10/100/1000Base-T(X) and 4xGigabit combo ports, SFP socket, highvoltage power inputs, US power cord Industrial IEC 61850-3 20-port managed Gigabit Ethernet switch with 16x10/100/1000Base-T(X) and 4xGigabit combo ports, SFP socket, highvoltage power inputs, UK power cord IGS-P9164GC-HV_EU Industrial IEC 61850-3 20-port managed Gigabit Ethernet switch with 16x10/100/1000Base-T(X) and 4xGigabit combo ports, SFP socket, highvoltage power inputs, EU power cord IGS-P9164GC-HV_JP Industrial IEC 61850-3 20-port managed Gigabit Ethernet switch with 16x10/100/1000Base-T(X) and 4xGigabit combo ports, SFP socket, highvoltage power inputs, JP power cord Optional Accessories (Can be purchased separately) ‧Open-Vision M500 : Powerful Network Management Windows Utility Suit, 500 IP devices ‧DR-120 series : 120 Watts DIN-Rail power supply ‧DR-45 series : 45 Watts DIN-Rail power supply ‧DR-75 series : 75 Watts DIN-Rail power supply ‧DBU-01 : backup unit device Industrial Cellular VPN Router Packing List ‧IGS-P9164GF(X) or GC x 1 ‧DIN-Rail Kit x 1 ‧AC power cord (for HV only) ‧ORing Tool CD x 1 ‧Wall-mount Kit x 2 ‧Quick Installation Guide x 1 ‧Console Cable x 1 Industrial Wireless Access Point IGS-P9164GC-HV_UK Industrial Device Server IGS-P9164GF-MM-SC-HV_EU Industrial Media Converter Available Model Description Industrial Ethernet Switch Model Name v1.0a Jul, 2015 Industrial M2M Gateway Accessories Network Management Software D esign ed for R u gged E xcellence 1-203