Oscillator · VCXO · 3.3 V SMD Voltage Control Crystal Oscillator · 7.5 x 5.0 mm General Data 2002/95/EC RoHS compliant stability code type JV75 3.3 V frequency range 1.0 ~ 125.0 MHz B C ± 50 ppm ± 25 ppm ◆ ± 25ppm / ± 50ppm -10 °C ~ +70 °C O O see table 1 -40 °C ~ +85 °C O O current consumption see table 2 • standard supply voltage VDC 3.3 V ± 10% frequency pulling range min. ± 50ppm / ± 100ppm / ± 150ppm pulling control voltage 1.65 V ± 1.65 V pulling linearity max. ± 10% temperature operating -10 °C ~ +70 °C / -40 °C ~ +85 °C storage -40 °C ~ +85 °C rise & fall time see table 3 load max. 15pF current max. 4mA low level max. 0.1 x VDC high level min. 0.9 x VDC output Pb free: pins / pads Table 1: Frequency Stability Code frequency stability over all* ◆ RoHS ■ two pinout versions available ■ reflow soldering temperature: 260 °C max. ■ ceramic/metal package actual size * includes stability at 25 °C, operating temp. range, supply voltage change, shock and vibration, aging 1st year. ▲ ◗ Current at 15pF load: 1.0 ~ 29.9 MHz 30.0 ~ 44.9 MHz 45.0 ~ 51.9 MHz 52.0 ~ 125.0 MHz 15 mA 20 mA 25 mA 35 mA Table 3: Rise & Fall Time max. 6.0 ns: 1.0 ~ 39.9 MHz 5.0 ns: 40.0 ~ 125.0 MHz ■ yes start-up time max. 10ms symmetry at 0.5 x VDC 45% ~ 55% typ. (40% ~ 60% max.) ▲ Table 2: Current Consumption max. ■ standby function not available > 52.0 MHz O available note: - specific data on request - rise time: 0.1 VDC ~ 0.9 VDC - fall time: 0.9 VDC ~ 0.1 VDC Recommendation To avoid phase noise or FM modulation in the output frequency spectrum, we recommend to feed the Vcontrol input pin by a low source impedance. not available > 80.0 MHz ◗ on request, if < 52.0 MHz Dimensions 2 x 2.54±0.1 7.5 max. 2 x 2.54±0.1 #1 #2 #3 top view #1 1.4±0.1 side view 2.0±0.1 4.2±0.1 2.46±0.1 1.8±0.2 5.0±0.2 #6 #5 #4 1.8±0.1 bottom view standard pin connection B # 1: Vcontrol # 2: e/d # 3: ground # 4: output # 5: nc # 6: VDD optional pin connection A # 1: Vcontrol # 2: nc # 3: ground # 4: output # 5: e/d # 6: VDD pad layout in mm Order Information O frequency in MHz type frequency stability in ppm supply voltage in Volt Oscillator 1.0 ~ 125.0 MHz JV75 C = ± 25 ppm◆ B = ± 50 ppm 3.3 = 3.3 V ◆ not available > 52.0 MHz pulling range in ppm pin version option 05 = ±50 ppm 10 = ±100 ppm▲ 15 = ±150 ppm ◗ B = standard A = optional blank = -10 °C ~ + 70 °C T1 = -40 °C ~ + 85 °C ▲ ◗ Example: O 20.0-JV75-C-3.3-10-B not available > 80.0 MHz on request, if < 52.0 MHz (LF = RoHS compliant / Pb free pins or pads) Jauch Quartz GmbH • e-mail: [email protected] full data can be found under: www.jauch.de / www.jauch.fr / www.jauchusa.com All specifications are subject to change without notice 260209 Oscillator · VCXO · JV75 · 3.3 V 0.4±0.05 17.5 ø 13 2.0 ø 21 ø 1.5±0.1 8.0±0.2 2.3±0.1 5.5 max. 500 pcs per reel in mm Direction of feed Reflow Soldering Profile temperature (°C) Marking frequency 10 s max. 260 °C max. 220 ±5 °C 180 ±5 °C 260 200 150 60 ~180 s 100 60 s max. 50 time (s) note: parts are also suitable for soldering systems with lead (Pb) content Control Voltage Characteristic type / date code date code: A ~ M: Jan.- Dec. 9: 2009 0: 2010 1: 2011 Jan. A Febr. B Mar. C Apr. D May E June F July G Aug. H Sept. J Oct. K Nov. L Dec. M Packing Note 3.3 V version – – standard packing units are 500 pieces per reel non-multiple packing units are only supplied taped / bulk 160 80 40 20 0 -20 -40 -80 0.825 1.65 2.45 control voltage (V) 3.3 frequency pulling range 120 ppm ø 80 ø 180/255 7.9 max. 9.25±0.1 120° 16.0±0.3 2.0±0.1 4.0±0.1 1.75±0.1 Taping Specification Enable / Disable Function pin #2/#5 pin #4 open or ≥ 0.7 VDC enable gnd or ≥ 0.3 VDC high impedance -120 -160 Jauch Quartz GmbH • e-mail: [email protected] full data can be found under: www.jauch.de / www.jauch.fr / www.jauchusa.com All specifications are subject to change without notice