Gamewell-FCI CAB632 Analog addressable control panel Datasheet

600 Series
IdentiFlex 632
with SmartScan™
Analog Addressable Control Panel
Description
With the addition of SmartLink™, the IdentiFlex 632 application can network multiple IF632s or other 600 Series fire
alarm panels. The interactive operator’s display uses LED
prompting for easy user operation and programming. The
alphanumeric display and keypad simplify field programming. A PC with Gamewell-FCI’s SmartProgram II can be
used to program the IF632.
The IdentiFlex 632 offers all the features of today’s most
advanced life safety systems. Integration of analog and
hard-wired circuits allows the system engineer to customize the control panel based on the application. The CPU
automatically senses system configuration to ensure that
modules are correctly positioned to speed installation and
maintenance.
IdentiFlex 632 software allows the system to be customized to specific applications, such as cross-zoning and
alarm verification.
Front-panel construction is designed to allow routine maintenance of the system without disturbing the I/O modules.
Multiple levels of password protection prevent unauthorized use. The cabinet is designed with terminal strips for
ease of installation and service.
Operator’s Display
The IdentiFlex 632 operator’s display has all the necessary
keys and annunciation points to maintain and monitor the
system. Alarm, Supervisory and Trouble conditions are all
indicated on the operator’s display by dedicated LEDs and
the internal sounder. The Acknowledge, Reset, and Signal
Silence keys are easily found on the display.
g2001ph1.jpg
The IdentiFlex 632 (IF632) with SmartScan™ is a full-featured Fire Alarm Control Panel (FACP) to monitor and control both analog intelligent addressable devices and
conventional hard-wired zones, providing maximum application flexibility. It is easily adapted to a new or retrofit
installation which calls for modular flexibility and performance, providing up to 1584 analog addressable points.
IF632SS
Features
• Analog/addressable and conventional input circuits.
• SmartScan™ protocol up to 99 detectors and 99
devices per loop.
• SmartStart™ self-programming logic.
• Fully modular.
• 160-character, four-line display.
• One to eight Signal Line Circuits (SLC) for up to 1584
addressable points.
• Automatic default response for increased survivability.
• 1000-event history log.
• Digital SLC protocol.
• PC or front-panel programming.
• Password protected.
• Serial annunciator, remote display, and remote printer
options.
• One-man, selectable-input walk test.
• Automatic drift compensation.
• Coded signaling.
• Day/night mode settings.
• Approved for Supervisory Service.
• Optional UDACT.
• Adjustable sensor sensitivity and temperature settings.
• Operates as either a stand-alone panel or a network
node using SmartLink™.
An ISO 9000-2000 Company
SIGNALING
SmartScan™ and SmartLink™ are trademarks of Honeywell International Inc.
FM
APPROVED
S521
GAMEWELL-FCI
12 Clintonville Road, Northford, CT 06472-1610 USA • Tel: (203) 484-7161 • Fax: (203) 484-7118
Specifications are for information only, are not intended for installation purposes, and are subject to change without notice. No responsibility is assumed by Gamewell-FCI for their use.
©2007 Honeywell International Inc. All rights reserved.
www.gamewell-fci.com
CS-2492 Rev. A page 1 of 3
Operator’s Display (Continued)
The Reset key returns the control panel to idle mode after
an alarm condition has been cleared. Trouble conditions
that have been cleared will automatically return the control
panel to idle mode when the problem has been corrected.
Trouble conditions that have been acknowledged will
resound the internal sounder if the condition is not corrected within a programmed time period.
The Signal Silence key deactivates notification appliances.
This function can be modified by user programming to
operate only after a specified time period.
There are three additional programmable switches available to control application-specific operations. Keys for
programming and bypass functions, along with LEDs for
active and trouble conditions, are provided for the City
Connection, and two signal circuits which are part of the
Common Control section.
Other Panel/System Components
The IF632 COMMON CONTROL SECTION comprises the
heart of the system. The common control section houses
the main CPU and all system memory as well as providing
local and remote communications and supervision. The
common control contains the common system relays, two
signal circuits, city tie, and optional EIA-232 port. All interaction with the common control section is through the operator’s display panel. Four relay circuits control auxiliary
functions. The relays, rated at 10 Amps, are controlled by
the main CPU. Two 24 VDC notification appliance circuits
(NAC) are provided. The NACs can provide a steady or
coded output. All circuits are power-limited per NEC 760
and UL 864.
The IF632 SmartScan™ ANALOG INTERFACE MODULE
(SSM-2/2E and SSM-4) occupies one bay and has from
two to four SLC circuits that can monitor and control up to
198 addressable/analog devices each for a total of 792
points per bay or 1584 points total. The analog interface
module has a dedicated microprocessor which simultaneously communicates with the connected field devices
and the main CPU. This feature allows the IF632 to maintain maximum communications speed throughout the system. Analog/addressable circuits can be wired as nonpolarized in Style 4, 6, or 7. The communications protocol
provides for alarm verification per detector, detector adjustability and compensation, adjustable analog heat detector
range (131°F to 194°F/55°C to 90°C), circuit isolation, and
priority interrupts. Priority interrupts allow contact-type
devices such as manual fire alarm stations to interrupt the
polling cycle and transmit their addresses at any time during a polling sequence. The digital protocol allows the
IF632 to operate on most types of field wiring, greatly
expanding its use in retrofit applications (consult the SLC
manual or Gamewell-FCI Technical Support for specific
wiring requirements).
The CONVENTIONAL INPUT MODULE (CIM-8) occupies
one bay and provides eight hard-wired input circuits for
monitoring conventional detectors and contact-type
devices. The CIM-8 monitors and reports each circuit’s
analog status to the CPU as it distinguishes between
detectors and contact devices and determines if two or
more detectors are in alarm. Each input module uses one
slot in the MPU bus and is supplied with its own display
module. The display module provides LED annunciation of
alarm and trouble conditions and has a switch (per circuit)
for programming and bypass functions. The display has
space for user-defined custom labels for each circuit.
Beyond normal alarm and supervisory functions, the input
circuits can be programmed for Remote Acknowledge,
Reset, Signal Silence, and Release Abort switches. Circuits can be wired for Style B, D, and E service and are
capable of monitoring normally-closed devices.
The 600 Series UNIVERSAL SIGNAL MODULE (USM-8)
occupies one bay and is a multifunctional eight-circuit output module. USM-8 modules communicate via the MPU
bus and require one expansion slot each. The USM can be
configured as 24 VDC signaling circuits. Modules are programmed in two-circuit increments, making it possible to
perform all four functions with a single module. Signal circuits provide steady or coded outputs. All circuits are
power-limited per NEC 760 and UL 864. Signal circuits can
be wired in either Style Y or Z. Signal modules are supplied
with their own display that provides LED annunciation of
activation and trouble conditions and has a switch (per circuit) for programming and bypass functions. The display
has space for user-defined custom labels for each circuit.
The 600 Series POWER SUPPLY (MPS-8) furnishes system operating and signaling power. The supply is equipped
with a battery charger for maintaining the secondary power
source. The power supply is monitored by the main CPU to
ensure that adequate power levels are maintained. The
power supply design allows for high efficiency while providing precise power output. The battery charger is capable of
operating with lead-acid batteries and maintaining up to 50
AH batteries.
The 600 Series RELAY MODULE (RM-8) supplies eight
NO/NC relays for control of auxiliary functions. The relays
are controlled by the main CPU and are fully programmable. Each position on the MPU bus can accommodate a
relay module. The relays are rated at 10 Amp and each is
provided with a feedback point for positive confirmation of
activation. Like all 600 Series expansion modules, the relay
module reports activation.
The 600 Series BUILDING CONTROL MODULE (BCM-8)
provides an interface between the fire alarm and HVAC
systems. Relays (rated at 10 A) are accompanied by feedback points for positive confirmation of the programmed
action. The BCM is available in eight-circuit modules that
GAMEWELL-FCI
12 Clintonville Road, Northford, CT 06472-1610 USA • Tel: (203) 484-7161 • Fax: (203) 484-7118
www.gamewell-fci.com
CS-2492 Rev. A page 2 of 3
are monitored and controlled by the MPU bus which can
monitor and control one expanded (i.e., eight-circuit) BCM
per position. The display for the BCM provides LEDs for
annunciation of relay state or feedback, and windows for
user-defined custom labeling. In addition, the display for
the BCM comes with a three position ON/OFF/AUTO
switch per circuit for manual override of the programmed
automatic functions.
The IF632 communicates with an EIA-232 printer either
locally or remotely for documentation of system activity.
The printer interface accepts serial communications from
the control panel and provides a parallel output to the
printer.
Although the common control module is equipped with a
city tie circuit which is suitable for most applications, an
optional four-circuit CITY TIE MODULE (CTX-4) has been
developed for applications that require multiple connections. The city tie module connects to the MPU bus and is
supplied with a display module. The CTX-4 can also be
used for applications requiring a polarity-reversal output.
Common Control:
The SYSTEM HOUSING CONFIGURATION for the IF632
control panel is a two-bay cabinet and will accommodate:
two of the 600 Series modules, device control display
(BCD, RCD, SCD) over the analog module, the common
control, power supply, and batteries.
Specifications
Standby Current:
Alarm Current:
Input Power:
0.275A
0.407A plus signaling circuit power,
plus 0.002A for master box, or plus
0.022A for reverse-polarity.
120 VAC, 2.0A
Auxiliary Output:
S+/S–, A+/A–: 24 VDC, 2.0A combined maximum
Common Relays:
10A @ 30 VDC, or 250A VAC
Signaling Circuits: 24 VDC nominal @ 2.0A per circuit
Panel Dimensions:
Cabinet:
Battery Capacity:
30.0" H x 22.0" W x 5.5" D
(76.2 H x 55.9 W x 13.97 D cm)
50 AH
Battery Storage Dimensions:
Applications
The Gamewell-FCI IdentiFlex 632 Analog Addressable
Control Panel is ideal for any project that require state-ofthe-art life safety systems. The embedded CPU offers
users unrivaled reliability with flexibility and value.
The IF632 control panel is designed to incorporate the analog addressable sensors into an integrated life safety system which will meet today’s most stringent requirements.
Addressable input-interface devices provide the means to
communicate with cost-effective conventional devices in
areas that do not require analog sensors.
Standard Cabinet:
10.5" H x 11.0" W x 4.5" D
(26.7 H x 27.9 W x 11.43 D cm)
Relative Humidity: 93% non-condensing
Temperature
Rating:
32°F – 120°F (0°C – 49°C)
Ordering Information
Model
IF632
SSM-2
Addressable control-output devices serve as the interface
between the analog circuits and building functions. The
outputs are controlled via Control-by-Event software and
can be programmed to respond to any event. The control
devices can also be used as supervised remote signal circuits.
The IF632’s optional EIA-232 output expands the system’s
display and control capability.
Serial annunciators can be added to display system activity
and control. The serial annunciator drivers provide the
interface to graphic annunciators.
SSM-2RE
CAB632
72122
Description
Analog/addressable control panel, with
two (2) open module bays available.
Two (2) circuit SmartScan™ analog/
addressable SLC cards, 99 detectors and
99 devices per SLC.
Note: Must be ordered separately, not
included with the IF632.
Two (2) circuit expander modules. Plugs
into the SSM-2 to expand the SSM-2 from
two (2) to four (4) SmartScan™ SLCs.
Note: Must be ordered separately, not
included with IF632 or SSM-2.
Empty cabinet housing with plexi-glass
door.
IdentiFlex 632 Installation/Operating
Manual
An alphanumeric display (RAN2-RCS) can also be used for
remote status and control. The alphanumeric display is
designed to communicate over the serial communications
network. It features a 160-character display and provides
remote reset/acknowledge/silence keys. See RAN/SAN
data sheets CS-2025 and CS-2027 for complete annunciator details.
GAMEWELL-FCI
12 Clintonville Road, Northford, CT 06472-1610 USA • Tel: (203) 484-7161 • Fax: (203) 484-7118
www.gamewell-fci.com
CS-2492 Rev. A page 3 of 3
Similar pages