Hittite HMC453ST89 Ingap hbt 1.6 watt power amplifier, 0.4 - 2.2 ghz Datasheet

HMC453ST89 / 453ST89E
v01.0205
AMPLIFIERS - SMT
5
InGaP HBT 1.6 WATT POWER
AMPLIFIER, 0.4 - 2.2 GHz
Designer’s Kit
Available
Typical Applications
Features
The HMC453ST89 / HMC453ST89E is ideal for applications requiring a high dynamic range amplifier:
Output IP3: +49 dBm
• GSM, GPRS & EDGE
7.5 dB Gain @ 2100 MHz
• CDMA & W-CDMA
41% PAE @ +32.5 dBm Pout
• CATV/Cable Modem
+26 dBm CDMA2000
Channel Power @ -45 dBc ACP
20.5 dB Gain @ 400 MHz
• Fixed Wireless
Included in the HMC-DK002 Designer’s Kit
Functional Diagram
General Description
The HMC453ST89 & HMC453ST89E are high
dynamic range GaAs InGaP HBT 1.6 Watt MMIC power
amplifiers operating from 0.4 to 2.2 GHz and packaged
in industry standard SOT89 packages. Utilizing a
minimum number of external components and a single
+5V supply, the amplifier output IP3 can be optimized
to +47 dBm at 0.4 GHz or +49 dBm at 2.1 GHz. The
high output IP3 and PAE make the HMC453ST89 &
HMC453ST89E ideal power amplifiers for Cellular/
PCS/3G and Fixed Wireless applications.
Electrical Specifications, TA = +25°C, Vs= +5V [1]
Parameter
Min.
Frequency Range
Gain
Typ.
Max.
Min.
400 - 410
18
Gain Variation Over
Temperature
Max
Min.
450 - 496
20.5
0.012
Typ.
16.5
0.02
Max.
Min.
810 - 960
19
0.012
Typ.
12
0.02
Max.
Min.
1710 - 1990
14.5
0.012
Typ.
6
0.02
8.5
0.012
Typ.
Max.
2010 - 2170
6
0.02
Units
MHz
7.5
dB
0.012
dB /
°C
0.02
Input Return Loss
20
14
20
15
13
dB
Output Return Loss
12
12
13
15
18
dB
32.5
dBm
32.75
dBm
49
dBm
Output Power for 1dB
Compression (P1dB)
28.5
Saturated Output
Power (Psat)
Output Third Order
Intercept (IP3) [2]
Noise Figure
Supply Current (Icq)
31.5
29
32
44
47
32
28.5
32.25
45
48
31.5
29
31.75
44
47
32
29.5
32.5
46
49
46
9
9
6.5
7
6.5
dB
725
725
725
725
725
mA
[1] Specifications and data reflect HMC453ST89 measured using the respective application circuits for each designated frequency band found herein.
Contact the HMC Applications Group for assistance in optimizing performance for your application.
[2] Two-tone input power of 0 dBm per tone, 1 MHz spacing.
5 - 318
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
HMC453ST89 / 453ST89E
v01.0205
InGaP HBT 1.6 WATT POWER
AMPLIFIER, 0.4 - 2.2 GHz
23
20
22
15
21
20
S21
S11
S22
5
0
-5
-10
19
18
17
+85 C
15
-40 C
-15
14
-20
13
-25
0.1
0.2
0.3
0.4
0.5
0.6
12
0.35
0.7
+25 C
16
0.37
0.39
0.41
FREQUENCY (GHz)
FREQUENCY (GHz)
Input Return Loss
vs. Temperature @ 400 MHz
Output Return Loss
vs. Temperature @ 400 MHz
0
RETURN LOSS (dB)
RETURN LOSS (dB)
+25 C
+85 C
-40 C
-15
-20
0.45
-10
-15
-20
+25 C
+85 C
-40 C
-25
0.37
0.39
0.41
0.43
-30
0.35
0.45
0.37
FREQUENCY (GHz)
33
32
32
31
31
Psat (dBm)
34
33
30
+25 C
+85 C
-40 C
28
27
30
29
27
26
25
25
0.39
0.41
FREQUENCY (GHz)
+25 C
+85 C
-40 C
28
26
0.37
0.41
Psat vs. Temperature @ 400 MHz
34
29
0.39
FREQUENCY (GHz)
P1dB vs. Temperature @ 400 MHz
P1dB (dBm)
0.43
-5
-10
24
0.35
0.45
0
-5
-25
0.35
0.43
AMPLIFIERS - SMT
25
10
5
Gain vs. Temperature @ 400 MHz
GAIN (dB)
RESPONSE (dB)
Broadband Gain
& Return Loss @ 400
0.43
0.45
24
0.35
0.37
0.39
0.41
0.43
0.45
FREQUENCY (GHz)
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
5 - 319
HMC453ST89 / 453ST89E
v01.0205
InGaP HBT 1.6 WATT POWER
AMPLIFIER, 0.4 - 2.2 GHz
Output IP3 vs. Temperature @ 400 MHz
Noise Figure
vs. Temperature @ 400 MHz
11
50
10
48
9
NOISE FIGURE (dB)
52
46
OIP3 (dBm)
44
42
+25 C
40
+85 C
38
-40 C
36
8
7
6
+85 C
4
-40 C
3
2
32
1
30
0.35
0.37
0.39
0.41
0.43
+25 C
5
34
0
0.35
0.45
0.37
0.39
FREQUENCY (GHz)
Reverse Isolation
vs. Temperature @ 400 MHz
ISOLATION (dB)
-5
+25 C
+85 C
-40 C
-15
-20
-25
-30
0.35
0.37
0.39
0.41
0.43
0.45
50
45
Gain
P1dB
Psat
OIP3
40
35
30
25
20
15
10
4.5
4.75
5
5.25
5.5
Vs (Vdc)
ACPR vs. Supply Voltage @ 400 MHz
W-CDMA, 64 DPCH
Power Compression @ 400 MHz
45
-10
-15
40
Pout
Gain
PAE
35
-20
W-CDMA
Frequency: 400 MHz
Integration BW: 3.84 MHz
64 DPCH
-25
30
ACPR (dBc)
Pout (dBm), Gain (dB), PAE (%)
0.45
55
FREQUENCY (GHz)
25
20
15
-30
-35
-40
4.5V
-45
5V
5.5V
-50
-55
10
-60
5
-65
0
Source ACPR
-70
0
2
4
6
8
10
INPUT POWER (dBm)
5 - 320
0.43
Gain, Power & IP3
vs. Supply Voltage @ 400 MHz
0
-10
0.41
FREQUENCY (GHz)
GAIN (dB), P1dB (dBm), Psat (dBm), OIP3 (dBm)
AMPLIFIERS - SMT
5
12
14
16
8
10
12
14
16
18
20
22
24
Channel Power (dBm)
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
26
28
HMC453ST89 / 453ST89E
v01.0205
InGaP HBT 1.6 WATT POWER
AMPLIFIER, 0.4 - 2.2 GHz
Broadband Gain
& Return Loss @ 470 MHz
5
Gain vs. Temperature @ 470 MHz
22
20
21
20
10
S21
GAIN (dB)
RESPONSE (dB)
15
S11
5
S22
0
19
18
17
16
+25 C
+85 C
-40 C
15
-5
14
-10
-15
0.1
13
0.2
0.3
0.4
0.5
0.6
12
0.43
0.7
0.45
0.47
0.49
FREQUENCY (GHz)
FREQUENCY (GHz)
Input Return Loss
vs. Temperature @ 470 MHz
Output Return Loss
vs. Temperature @ 470 MHz
+25 C
+85 C
-40 C
-5
-10
-15
-20
0.43
0.45
0.47
0.49
0.51
0.53
-15
0.45
33
32
32
31
31
Psat (dBm)
34
33
30
+25 C
+85 C
-40 C
28
27
30
29
27
26
25
25
0.47
0.49
FREQUENCY (GHz)
+25 C
+85 C
-40 C
28
26
0.45
0.49
Psat vs. Temperature @ 470 MHz
34
29
0.47
FREQUENCY (GHz)
P1dB vs. Temperature @ 470 MHz
P1dB (dBm)
0.51
-10
-20
0.43
0.53
+25 C
+85 C
-40 C
-5
FREQUENCY (GHz)
24
0.43
0.53
0
RETURN LOSS (dB)
RETURN LOSS (dB)
0
0.51
AMPLIFIERS - SMT
23
25
0.51
0.53
24
0.43
0.45
0.47
0.49
0.51
0.53
FREQUENCY (GHz)
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
5 - 321
HMC453ST89 / 453ST89E
v01.0205
Output IP3 vs. Temperature @ 470 MHz
Noise Figure
vs. Temperature @ 470 MHz
11
50
10
48
9
NOISE FIGURE (dB)
52
46
OIP3 (dBm)
44
42
+25 C
40
+85 C
38
-40 C
36
8
7
6
+85 C
4
-40 C
3
2
32
1
30
0.43
0.45
0.47
0.49
0.51
+25 C
5
34
0
0.43
0.53
0.45
0.47
FREQUENCY (GHz)
Reverse Isolation
vs. Temperature @ 470 MHz
ISOLATION (dB)
-5
+25 C
+85 C
-40 C
-15
-20
-25
-30
0.43
0.45
0.47
0.49
0.51
0.53
45
Gain
P1dB
Psat
OIP3
40
35
30
25
20
15
10
4.5
4.75
5
5.25
5.5
Vs (Vdc)
ACPR vs. Supply Voltage @ 470 MHz
W-CDMA, 64 DPCH
Power Compression @ 470 MHz
50
-10
45
-15
-20
40
Pout
Gain
PAE
35
W-CDMA
Frequency: 470 MHz
Integration BW: 3.84 MHz
64 DPCH
-25
ACPR (dBc)
Pout (dBm), Gain (dB), PAE (%)
0.53
50
FREQUENCY (GHz)
30
25
20
-30
-35
-40
4.5V
5V
-45
5.5V
-50
15
-55
10
-60
5
-65
0
-70
0
2
4
6
8
10
INPUT POWER (dBm)
5 - 322
0.51
Gain, Power & IP3
vs. Supply Voltage @ 470 MHz
0
-10
0.49
FREQUENCY (GHz)
GAIN (dB), P1dB (dBm), Psat (dBm), OIP3 (dBm)
AMPLIFIERS - SMT
5
InGaP HBT 1.6 WATT POWER
AMPLIFIER, 0.4 - 2.2 GHz
12
14
16
Source ACPR
8
10
12
14
16
18
20
22
24
Channel Power (dBm)
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
26
28
HMC453ST89 / 453ST89E
v01.0205
InGaP HBT 1.6 WATT POWER
AMPLIFIER, 0.4 - 2.2 GHz
5
Gain vs. Temperature @ 900 MHz
20
18
15
17
16
15
5
S21
GAIN (dB)
RESPONSE (dB)
10
S11
0
S22
-5
14
13
12
+25C
11
+85C
10
-40C
-10
-15
-20
0.4
9
0.5
0.6
0.7
0.8
0.9
1
1.1
1.2
1.3
8
0.7
1.4
0.75
0.8
0.85
0.9
0.95
FREQUENCY (GHz)
FREQUENCY (GHz)
Input Return Loss
vs. Temperature @ 900 MHz
Output Return Loss
vs. Temperature @ 900 MHz
1.05
1.1
1
1.05
1.1
1.05
1.1
0
0
-5
+25C
+85C
-40C
-10
RETURN LOSS (dB)
RETURN LOSS (dB)
1
AMPLIFIERS - SMT
Broadband Gain
& Return Loss @ 900 MHz
-15
-20
+25C
+85C
-40C
-5
-10
-15
-25
-30
0.7
0.75
0.8
0.85
0.9
0.95
1
1.05
-20
0.7
1.1
0.75
0.8
FREQUENCY (GHz)
34
34
33
33
32
32
31
31
30
+25C
+85C
-40C
28
27
29
27
26
25
0.8
0.85
0.9
0.95
FREQUENCY (GHz)
+25C
+85C
-40C
28
25
0.75
0.95
30
26
24
0.7
0.9
Psat vs. Temperature @ 900 MHz
Psat (dBm)
P1dB (dBm)
P1dB vs. Temperature @ 900 MHz
29
0.85
FREQUENCY (GHz)
1
1.05
1.1
24
0.7
0.75
0.8
0.85
0.9
0.95
1
FREQUENCY (GHz)
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
5 - 323
HMC453ST89 / 453ST89E
v01.0205
5
InGaP HBT 1.6 WATT POWER
AMPLIFIER, 0.4 - 2.2 GHz
Output IP3 vs. Temperature @ 900 MHz
Noise Figure
vs. Temperature @ 900 MHz
10
9
50
8
NOISE FIGURE (dB)
OIP3 (dBm)
45
+25C
40
+85C
-40C
35
7
6
5
4
+25C
3
+85C
2
-40C
1
30
0.75
0.8
0.85
0.9
0.95
0
0.7
1
0.75
0.8
FREQUENCY (GHz)
0
ISOLATION (dB)
-5
+25C
+85C
-40C
-15
-20
-25
-30
0.7
0.75
0.8
0.85
0.9
0.95
1
1.05
1.1
1
1.05
1.1
50
Gain
P1dB
Psat
OIP3
45
40
35
30
25
20
15
10
4.5
4.75
5
5.25
5.5
Vs (Vdc)
ACPR vs. Supply Voltage @ 910 MHz
CDMA IS95, 9 Channels Forward
Power Compression @ 900 MHz
55
-10
50
-15
-20
45
Pout
Gain
PAE
40
35
CDMA IS95
Frequency: 910 MHz
Integration BW: 1.228 MHz
Forward Link, 9 Channels
-25
ACPR (dBc)
Pout (dBm), Gain (dB), PAE (%)
0.95
55
FREQUENCY (GHz)
30
25
20
-30
-35
-40
-45
4.5V
-50
15
5V
5.5V
-55
10
-60
5
-65
0
Source ACPR
-70
4
6
8
10
12
14
INPUT POWER (dBm)
5 - 324
0.9
Gain, Power & IP3
vs. Supply Voltage @ 900 MHz
Reverse Isolation
vs. Temperature @ 900 MHz
-10
0.85
FREQUENCY (GHz)
GAIN (dB), P1dB (dBm), Psat (dBm), OIP3 (dBm)
AMPLIFIERS - SMT
55
16
18
20
8
10
12
14
16
18
20
22
Channel Power (dBm)
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
24
26
HMC453ST89 / 453ST89E
v01.0205
InGaP HBT 1.6 WATT POWER
AMPLIFIER, 0.4 - 2.2 GHz
Broadband Gain
& Return Loss @ 1900 MHz
11
10
10
9
8
0
GAIN (dB)
RESPONSE (dB)
5
-5
-10
7
6
5
+25 C
+85 C
-40 C
4
-15
3
S21
S11
S22
-20
2
1
-25
1
1.2
1.4
1.6
1.8
2
2.2
2.4
2.6
2.8
0
1.7
3
1.8
FREQUENCY (GHz)
Input Return Loss
vs. Temperature @ 1900 MHz
+25 C
+85 C
-40 C
2
2.1
+25 C
+85 C
-40 C
-5
RETURN LOSS (dB)
RETURN LOSS (dB)
2.1
0
-5
-10
-15
-20
-10
-15
-20
1.8
1.9
2
-25
1.7
2.1
1.8
FREQUENCY (GHz)
1.9
FREQUENCY (GHz)
P1dB vs. Temperature @ 1900 MHz
Psat vs. Temperature @ 1900 MHz
36
35
35
34
34
33
33
32
32
Psat (dBm)
36
31
30
29
28
31
30
29
+25 C
+85 C
-40 C
28
+25 C
+85 C
-40 C
27
26
27
26
25
24
1.7
2
Output Return Loss
vs. Temperature @ 1900 MHz
0
-25
1.7
1.9
FREQUENCY (GHz)
AMPLIFIERS - SMT
12
15
P1dB (dBm)
5
Gain vs. Temperature @ 1900 MHz
25
1.8
1.9
FREQUENCY (GHz)
2
2.1
24
1.7
1.8
1.9
2
2.1
FREQUENCY (GHz)
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
5 - 325
HMC453ST89 / 453ST89E
v01.0205
InGaP HBT 1.6 WATT POWER
AMPLIFIER, 0.4 - 2.2 GHz
Output IP3 vs. Temperature @ 1900 MHz
Noise Figure
vs. Temperature @ 1900 MHz
10
50
9
48
8
NOISE FIGURE (dB)
52
46
OIP3 (dBm)
44
42
40
38
+25 C
+85 C
-40 C
36
34
7
6
5
4
+25 C
+85 C
-40 C
3
2
1
32
30
1.7
1.8
1.9
2
0
1.7
2.1
1.8
FREQUENCY (GHz)
Reverse Isolation
vs. Temperature @ 1900 MHz
ISOLATION (dB)
-5
+25 C
+85 C
-40 C
-15
-20
1.7
1.8
1.9
2
2.1
50
45
40
35
30
25
Gain
P1dB
Psat
OIP3
20
15
10
5
4.5
4.75
5
5.25
5.5
Vs (Vdc)
ACPR vs. Supply Voltage @ 1960 MHz
CDMA 2000, 9 Channels Forward
Power Compression @ 1900 MHz
40
-30
-35
35
Pout
Gain
PAE
30
-40
-45
ACPR (dBc)
Pout (dBm), Gain (dB), PAE (%)
2.1
55
FREQUENCY (GHz)
25
20
15
-50
CDMA2000
Frequency: 1.96 GHz
Integration BW: 1.228 MHz
Forward Link, SR1, 9 Channels
4.5V
5V
5.5V
-55
-60
-65
10
-70
5
-75
0
10
12
14
16
18
20
22
INPUT POWER (dBm)
5 - 326
2
Gain, Power & IP3
vs. Supply Voltage @ 1900 MHz
0
-10
1.9
FREQUENCY (GHz)
GAIN (dB), P1dB (dBm), Psat (dBm), OIP3 (dBm)
AMPLIFIERS - SMT
5
24
26
28
-80
14
16
18
20
22
24
OUTPUT CHANNEL POWER (dBm)
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
26
28
HMC453ST89 / 453ST89E
v01.0205
InGaP HBT 1.6 WATT POWER
AMPLIFIER, 0.4 - 2.2 GHz
Broadband Gain
& Return Loss @ 2100 MHz
5
Gain vs. Temperature @ 2100 MHz
10
9
5
7
GAIN (dB)
RESPONSE (dB)
8
0
-5
-10
6
5
4
+25 C
+85 C
-40 C
3
-15
S21
S11
S22
-20
2
1
-25
1
1.2
1.4
1.6
1.8
2
2.2
2.4
2.6
2.8
0
1.9
3
2
FREQUENCY (GHz)
2.1
2.2
2.3
2.2
2.3
FREQUENCY (GHz)
Input Return Loss
vs. Temperature @ 2100 MHz
AMPLIFIERS - SMT
10
Output Return Loss
vs. Temperature @ 2100 MHz
0
0
RETURN LOSS (dB)
RETURN LOSS (dB)
-5
+25 C
+85 C
-40 C
-5
-10
-15
+25 C
+85 C
-40 C
-10
-15
-20
-25
-20
1.9
2
2.1
2.2
-30
1.9
2.3
2
FREQUENCY (GHz)
Psat vs. Temperature @ 2100 MHz
35
35
34
34
33
33
32
32
Psat (dBm)
P1dB (dBm)
P1dB vs. Temperature @ 2100 MHz
31
30
29
28
30
29
+25 C
+85 C
-40 C
27
26
25
1.9
31
28
+25 C
+85 C
-40 C
27
2.1
FREQUENCY (GHz)
26
2
2.1
FREQUENCY (GHz)
2.2
2.3
25
1.9
2
2.1
2.2
2.3
FREQUENCY (GHz)
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
5 - 327
HMC453ST89 / 453ST89E
v01.0205
Output IP3 vs. Temperature @ 2100 MHz
Noise Figure
vs. Temperature @ 2100 MHz
10
50
9
48
8
NOISE FIGURE (dB)
52
46
OIP3 (dBm)
44
42
+25 C
+85 C
-40 C
40
38
36
7
6
5
4
2
32
1
30
1.9
2
2.1
2.2
+25 C
+85 C
-40 C
3
34
0
1.9
2.3
2
FREQUENCY (GHz)
0
ISOLATION (dB)
-5
+25 C
+85 C
-40 C
-15
-20
1.9
2
2.1
2.2
2.3
50
45
40
35
30
25
Gain
P1dB
Psat
OIP3
20
15
10
5
4.5
4.75
5
5.25
5.5
Vs (Vdc)
ACPR vs. Supply Voltage @ 2140 MHz
W-CDMA, 64 DPCH
Power Compressions @ 2100 MHz
45
-20
40
-25
Pout
Gain
PAE
35
4.5V
W-CDMA
Frequency: 2.14 GHz
Integration BW: 3.84 MHz
64 DPCH
-30
30
ACPR (dBc)
Pout (dBm), Gain (dB), PAE (%)
2.3
55
FREQUENCY (GHz)
25
20
-35
5V
-40
5.5V
-45
15
-50
10
-55
5
-60
Source ACPR
0
-65
10
12
14
16
18
20
22
INPUT POWER (dBm)
5 - 328
2.2
Gain, Power & IP3
vs. Supply Voltage @ 2100 MHz
Reverse Isolation
vs. Temperature @ 2100 MHz
-10
2.1
FREQUENCY (GHz)
GAIN (dB), P1dB (dBm), Psat (dBm), OIP3 (dBm)
AMPLIFIERS - SMT
5
InGaP HBT 1.6 WATT POWER
AMPLIFIER, 0.4 - 2.2 GHz
24
26
28
12
14
16
18
20
22
24
OUTPUT CHANNEL POWER (dBm)
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
26
28
HMC453ST89 / 453ST89E
v01.0205
InGaP HBT 1.6 WATT POWER
AMPLIFIER, 0.4 - 2.2 GHz
POWER DISSIPATION (W)
4.5
Max Pdiss @ +85 C
4
5
Absolute Maximum Ratings
3.5
3
2100 MHz
2.5
2
1900 MHz
1.5
Collector Bias Voltage (Vcc)
+6.0 Vdc
RF Input Power (RFin)(Vs +5.0 Vdc)
+32 dBm
Junction Temperature
150 °C
Continuous Pdiss (T = 85 °C)
(derate 58.5 mW/°C above 85 °C)
3.8 W
Thermal Resistance
(junction to ground paddle)
17.1 °C/W
Storage Temperature
-65 to +150 °C
Operating Temperature
-40 to +85 °C
1
0
5
10
15
20
25
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
INPUT POWER (dBm)
AMPLIFIERS - SMT
Power Dissipation
Outline Drawing
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS]
3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE.
4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE.
5. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO
PCB RF GROUND.
Package Information
Part Number
Package Body Material
Lead Finish
MSL Rating
HMC453ST89
Low Stress Injection Molded Plastic
Sn/Pb Solder
MSL1
HMC453ST89E
RoHS-compliant Low Stress Injection Molded Plastic
100% matte Sn
MSL1
Package Marking [3]
[1]
H453
XXXX
[2]
H453
XXXX
[1] Max peak reflow temperature of 235 °C
[2] Max peak reflow temperature of 260 °C
[3] 4-Digit lot number XXXX
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
5 - 329
HMC453ST89 / 453ST89E
v01.0205
AMPLIFIERS - SMT
5
InGaP HBT 1.6 WATT POWER
AMPLIFIER, 0.4 - 2.2 GHz
Pin Descriptions
Pin Number
Function
Description
Interface Schematic
1
RFIN
This pin is DC coupled.
Off chip matching components are required.
See Application Circuit herein.
3
RFOUT
RF output and DC Bias input for the amplifier.
Off chip matching components are required.
See Application Circuit herein.
2, 4
GND
These pins & package bottom must be connected to
RF/DC ground.
400 MHz Application Circuit
This circuit was used to specify the performance for 400-410 MHz operation. Contact the HMC Applications
Group for assistance in optimizing performance for your application.
TL1
TL2
TL3
TL4
TL5
TL6
50 Ohm
50 Ohm
50 Ohm
50 Ohm
50 Ohm
50 Ohm
C1, C4
10 pF
Physical Length
0.16”
0.04”
0.06”
0.21”
0.04”
0.10”
C2, C3
8.2 pF
Electrical Length
4°
1°
1°
5°
1°
2°
C5
39 pF
C6
100 pF
Impedance
PCB Material: 10 mil Rogers 4350, Er = 3.48
5 - 330
Recommended Component Values
C7
12 pF
C8
2.2 μF
L1
47 nH
L2
40 nH
L3
4.3 nH
L4
5.1 nH
R1
5.1 Ohm
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
HMC453ST89 / 453ST89E
v01.0205
InGaP HBT 1.6 WATT POWER
AMPLIFIER, 0.4 - 2.2 GHz
5
AMPLIFIERS - SMT
400 MHz Evaluation PCB
List of Materials for Evaluation PCB 110957-400
Item
Description
J1 - J2
PCB Mount SMA Connector
J3
2 mm DC Header
C1, C4
10 pF Capacitor, 0402 Pkg.
C2, C3
8.2 pF Capacitor, 0402 Pkg.
C5
39 pF Capacitor, 0402 Pkg.
C6
100 pF Capacitor, 0402 Pkg.
C7
12 pF Capacitor, 0402 Pkg.
C8
2.2 μF Capacitor, Tantalum
L1
47 nH Inductor, 0603 Pkg.
L2
40 nH Inductor, 0402 Pkg.
L3
4.3 nH Inductor, 0402 Pkg.
L4
5.1 nH Inductor, 0402 Pkg.
R1
5.1 Ohm Resistor, 0402 Pkg.
U1
HMC453ST89 / HMC453ST89E
Linear Amp
PCB [2]
110955 Evaluation PCB, 10 mils
[1]
The circuit board used in this application should use
RF circuit design techniques. Signal lines should
have 50 ohm impedance while the package ground
leads and exposed paddle should be connected
directly to the ground plane similar to that shown.
A sufficient number of VIA holes should be used
to connect the top and bottom ground planes.
The evaluation board should be mounted to an
appropriate heat sink. The evaluation circuit board
shown is available from Hittite upon request.
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350, Er = 3.48
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
5 - 331
HMC453ST89 / 453ST89E
v01.0205
AMPLIFIERS - SMT
5
470 MHz Application Circuit
This circuit was used to specify the performance for 450-496 MHz operation. Contact the HMC Applications
Group for assistance in optimizing performance for your application.
TL1
TL2
TL3
TL4
TL5
TL6
50 Ohm
50 Ohm
50 Ohm
50 Ohm
50 Ohm
50 Ohm
C1
10 pF
Physical Length
0.16”
0.04”
0.06”
0.21”
0.04”
0.10”
C2, C3
6.8 pF
Electrical Length
4°
1°
2°
6°
1°
3°
C4
12 pF
Impedance
PCB Material: 10 mil Rogers 4350, Er = 3.48
5 - 332
InGaP HBT 1.6 WATT POWER
AMPLIFIER, 0.4 - 2.2 GHz
Recommended Component Values
C5
39 pF
C6
100 pF
C7
5.6 pF
C8
2.2 μF
L1
47 nH
L2
40 nH
L3
4.7 nH
L4
2.4 nH
R1
5.1 Ohm
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
HMC453ST89 / 453ST89E
v01.0205
InGaP HBT 1.6 WATT POWER
AMPLIFIER, 0.4 - 2.2 GHz
5
AMPLIFIERS - SMT
470 MHz Evaluation PCB
List of Materials for Evaluation PCB 110961-470
Item
Description
J1 - J2
PCB Mount SMA Connector
J3
2 mm DC Header
C1
10 pF Capacitor, 0402 Pkg.
C2, C3
6.8 pF Capacitor, 0402 Pkg.
C4
12 pF Capacitor, 0402 Pkg.
C5
39 pF Capacitor, 0402 Pkg.
C6
100 pF Capacitor, 0402 Pkg.
C7
5.6 pF Capacitor, 0402 Pkg.
C8
2.2 μF Capacitor, Tantalum
L1
47 nH Inductor, 0603 Pkg.
L2
40 nH Inductor, 0402 Pkg.
L3
4.7 nH Inductor, 0402 Pkg.
L4
2.4 nH Inductor, 0402 Pkg.
R1
5.1 Ohm Resistor, 0402 Pkg.
U1
HMC453ST89 / HMC453ST89E
Linear Amp
PCB [2]
110955 Evaluation PCB, 10 mils
[1]
The circuit board used in this application should use
RF circuit design techniques. Signal lines should
have 50 ohm impedance while the package ground
leads and exposed paddle should be connected
directly to the ground plane similar to that shown.
A sufficient number of VIA holes should be used
to connect the top and bottom ground planes.
The evaluation board should be mounted to an
appropriate heat sink. The evaluation circuit board
shown is available from Hittite upon request.
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350, Er = 3.48
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
5 - 333
HMC453ST89 / 453ST89E
v01.0205
AMPLIFIERS - SMT
5
900 MHz Application Circuit
This circuit was used to specify the performance for 810-960 MHz operation. Contact the HMC Applications
Group for assistance in optimizing performance for your application.
TL1
TL2
TL3
50 Ohm
50 Ohm
50 Ohm
C1
5 pF
Physical Length
0.25”
0.08”
0.31”
C2
3.3 pF
Electrical Length
13°
4°
16°
C3
2.7 pF
C4
8.2 pF
Impedance
PCB Material: 10 mil Rogers 4350, Er = 3.48
5 - 334
InGaP HBT 1.6 WATT POWER
AMPLIFIER, 0.4 - 2.2 GHz
Recommended Component Values
C5
12 pF
C6
100 pF
C7
2.2 μF
L1
15 nH
R1
5.1 Ohm
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
HMC453ST89 / 453ST89E
v01.0205
InGaP HBT 1.6 WATT POWER
AMPLIFIER, 0.4 - 2.2 GHz
5
AMPLIFIERS - SMT
900 MHz Evaluation PCB
List of Materials for Evaluation PCB 110387-900 [1]
Item
Description
J1 - J2
PCB Mount SMA Connector
J3
2 mm DC Header
C1
5 pF Capacitor, 0402 Pkg.
C2
3.3 pF Capacitor, 0402 Pkg.
C3
2.7 pF Capacitor, 0402 Pkg.
C4
8.2 pF Capacitor, 0402 Pkg.
C5
12 pF Capacitor, 0402 Pkg.
C6
100 pF Capacitor, 0402 Pkg.
C7
2.2 μF Capacitor, Tantalum
L1
15 nH Inductor, 0603 Pkg.
R1
5.1 Ohm Resistor, 0402 Pkg.
U1
HMC453ST89 / HMC453ST89E
Linear Amp
PCB [2]
110385 Evaluation PCB, 10 mils
The circuit board used in this application should use
RF circuit design techniques. Signal lines should
have 50 ohm impedance while the package ground
leads and exposed paddle should be connected
directly to the ground plane similar to that shown.
A sufficient number of VIA holes should be used
to connect the top and bottom ground planes.
The evaluation board should be mounted to an
appropriate heat sink. The evaluation circuit board
shown is available from Hittite upon request.
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350, Er = 3.48
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
5 - 335
HMC453ST89 / 453ST89E
v01.0205
AMPLIFIERS - SMT
5
1900 MHz Application Circuit
This circuit was used to specify the performance for 1710-1990 MHz operation. Contact the HMC Applications
Group for assistance in optimizing performance for your application.
TL1
TL2
50 Ohm
50 Ohm
C1
1.2 pF
Physical Length
0.04”
0.07”
C2
1.5 pF
Electrical Length
4°
8°
C3
3.9 pF
C4
15 pF
C5
100 pF
C6
2.2 μF
L1
20 nH
L2
12 nH
R1
5.1 Ohm
Impedance
PCB Material: 10 mil Rogers 4350, Er = 3.48
5 - 336
InGaP HBT 1.6 WATT POWER
AMPLIFIER, 0.4 - 2.2 GHz
Recommended Component Values
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
HMC453ST89 / 453ST89E
v01.0205
InGaP HBT 1.6 WATT POWER
AMPLIFIER, 0.4 - 2.2 GHz
5
AMPLIFIERS - SMT
1900 MHz Evaluation PCB
List of Materials for Evaluation PCB 108718-1900
Item
Description
J1 - J2
PCB Mount SMA Connector
J3
2 mm DC Header
C1
1.2 pF Capacitor, 0402 Pkg.
C2
1.5 pF Capacitor, 0402 Pkg.
C3
3.9 pF Capacitor, 0402 Pkg.
C4
15 pF Capacitor, 0402 Pkg.
C5
100 pF Capacitor, 0402 Pkg.
C6
2.2 μF Capacitor, Tantalum
L1
20 nH Inductor, 0402 Pkg.
L2
12 nH Inductor, 0402 Pkg.
R1
5.1 Ohm Resistor, 0402 Pkg.
U1
HMC453ST89 / HMC453ST89E
Linear Amp
PCB [2]
108716 Evaluation PCB, 10 mils
[1]
The circuit board used in this application should use
RF circuit design techniques. Signal lines should
have 50 ohm impedance while the package ground
leads and exposed paddle should be connected
directly to the ground plane similar to that shown.
A sufficient number of VIA holes should be used
to connect the top and bottom ground planes.
The evaluation board should be mounted to an
appropriate heat sink. The evaluation circuit board
shown is available from Hittite upon request.
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350, Er = 3.48
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
5 - 337
HMC453ST89 / 453ST89E
v01.0205
AMPLIFIERS - SMT
5
InGaP HBT 1.6 WATT POWER
AMPLIFIER, 0.4 - 2.2 GHz
2100 MHz Application Circuit
This circuit was used to specify the performance for 2010-2170 MHz operation. Contact the HMC Applications Group
for assistance in optimizing performance for your application.
Note: C2 and C3 should be placed as close to pins as possible.
TL2
TL3
50 Ohm
50 Ohm
C1
Physical Length
0.04”
0.04”
0.04”
C2
1 pF
Electrical Length
5°
5°
5°
C3
3.3 pF
C4
15 pF
C5
100 pF
PCB Material: 10 mil Rogers 4350, Er = 3.48
5 - 338
Recommended Component Values
TL1
50 Ohm
Impedance
0.8 pF
C6
0.5 pF
C7
2.2 μF
L1
20 nH
L2
12 nH
R1
5.1 Ohm
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
HMC453ST89 / 453ST89E
v01.0205
InGaP HBT 1.6 WATT POWER
AMPLIFIER, 0.4 - 2.2 GHz
5
AMPLIFIERS - SMT
2100 MHz Evaluation PCB
List of Materials for Evaluation PCB 109942-2100
Item
Description
J1 - J2
PCB Mount SMA Connector
J3
2 mm DC Header
C1
0.8 pF Capacitor, 0402 Pkg.
C2
1 pF Capacitor, 0402 Pkg.
C3
3.3 pF Capacitor, 0402 Pkg.
C4
15 pF Capacitor, 0402 Pkg.
C5
100 pF Capacitor, 0402 Pkg.
C6
0.5 pF Capacitor, 0402 Pkg.
C7
2.2 μF Capacitor, Tantalum
L1
20 nH Inductor, 0402 Pkg.
L2
12 nH Inductor, 0402 Pkg.
R1
5.1 Ohm Resistor, 0402 Pkg.
U1
HMC453ST89 / HMC453ST89E
Linear Amp
PCB [2]
109940 Evaluation PCB, 10 mils
[1]
The circuit board used in this application should
use RF circuit design techniques. Signal lines
should have 50 ohm impedance while the package
ground leads and exposed paddle should be connected directly to the ground plane similar to that
shown. A sufficient number of VIA holes should be
used to connect the top and bottom ground planes.
The evaluation board should be mounted to an
appropriate heat sink. The evaluation circuit board
shown is available from Hittite upon request.
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350, Er = 3.48
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
5 - 339
Similar pages