ON LM301AD Non compensated single operational amplifier Datasheet

LM301A, LM201A, LM201AV
Non Compensated Single
Operational Amplifiers
A general purpose operational amplifier that allows the user to
choose the compensation capacitor best suited to his needs. With
proper compensation, summing amplifier slew rates to 10 V/ms can be
obtained.
http://onsemi.com
Features
MARKING
DIAGRAMS
• Low Input Offset Current: 20 nA Maximum Over Temperature
•
•
•
•
•
Range
External Frequency Compensation for Flexibility
Class AB Output Provides Excellent Linearity
Output Short Circuit Protection
Guaranteed Drift Characteristics
Pb−Free Packages are Available
8
LMx01AN
AWL
YYWWG
PDIP−8
N SUFFIX
CASE 626
8
1
1
8
VEE
Inverting
Input
8
VCC
Non−
Inverting
Input
SOIC−8
D SUFFIX
CASE 751
1
LMx01
ALYW
G
1
Output
+
Balance
Freq
Compen
10 MW
30 pF
Balance
x
A
WL, L
YY, Y
WW, W
G
G
5.1 MW
20 k
VEE
= 2 or 3
= Assembly Location
= Wafer Lot
= Year
= Work Week
= Pb−Free Package
= Pb−Free Package
Figure 1. Standard Compensation
and Offset Balancing Circuit
PIN CONNECTIONS
Balance
VUT
VCC
Inputs
+
VEE
VO
1
8
Compensation
2
7
VCC
3
6
Output
4
5
Balance
(Top View)
VI
MZ4622 or Equiv.
VEE
VCC
3.9 V
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 2 of this data sheet.
VO
VLT
VEE
VO = 4.8 V for
VLT ≤ VI ≤ VUT
VO = −0.4 V
VI < VLT or VI > VUT
(Pins Not Shown Are Not Connected)
Figure 2. Double−Ended Limit Detector
© Semiconductor Components Industries, LLC, 2005
July, 2005 − Rev. 10
1
Publication Order Number:
LM301A/D
LM301A, LM201A, LM201AV
Balance
Compensation
VCC
Inputs
+
500
25
Output
50
450
40k
5k
20 k
250
40k
10 k
80 k
1.0 k
VEE
Balance
Figure 3. Representative Circuit Schematic
ORDERING INFORMATION
Package
Shipping †
SOIC−8
98 Units/Rail
LM301ADG
SOIC−8
(Pb−Free)
98 Units/Rail
LM301ADR2
SOIC−8
2500 Tape & Reel
SOIC−8
(Pb−Free)
2500 Tape & Reel
PDIP−8
50 Units/Rail
PDIP−8
(Pb−Free)
50 Units/Rail
SOIC−8
98 Units/Rail
LM201ADG
SOIC−8
(Pb−Free)
98 Units/Rail
LM201ADR2
SOIC−8
2500 Tape & Reel
SOIC−8
(Pb−Free)
2500 Tape & Reel
PDIP−8
50 Units/Rail
PDIP−8
(Pb−Free)
50 Units/Rail
SOIC−8
2500 Tape & Reel
SOIC−8
(Pb−Free)
2500 Tape & Reel
Device
LM301AD
LM301ADR2G
LM301AN
LM301ANG
LM201AD
LM201ADR2G
LM201AN
LM201ANG
LM201AVDR2
LM201AVDR2G
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
http://onsemi.com
2
LM301A, LM201A, LM201AV
MAXIMUM RATINGS
Value
Rating
Power Supply Voltage
Symbol
LM201A
LM201AV
LM301A
Unit
VCC, VEE
±22
±22
±18
Vdc
Input Differential Voltage
VID
±30
V
Input Common Mode Range (Note 1)
VICR
±15
V
Output Short Circuit Duration
tSC
Continuous
Power Dissipation (Package Limitation)
PD
Plastic Dual−In−Line Package
Derate above TA = +25°C
625
5.0
Operating Ambient Temperature Range
TA
Storage Temperature Range
Tstg
−25 to +85
625
5.0
625
5.0
mW
mW/°C
−40 to +105
0 to +70
°C
°C
−65 to +150
Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit
values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied,
damage may occur and reliability may be affected.
ELECTRICAL CHARACTERISTICS (TA = +25°C, unless otherwise noted.) Unless otherwise specified, these specifications apply
for supply voltages from ± 5.0 V to ± 20 V for the LM201A and LM201AV, and from ± 5.0 V to ±15 V for the LM301A.
LM201A / LM201AV
LM301A
Symbol
Min
Typ
Max
Min
Typ
Max
Unit
Input Offset Voltage (RS ≤ 50 kW)
VIO
−
0.7
2.0
−
2.0
7.5
mV
Input Offset Current
IIO
−
1.5
10
−
3.0
50
nA
Input Bias Current
IIB
−
30
75
−
70
250
nA
Input Resistance
ri
1.5
4.0
−
0.5
2.0
−
MW
−
−
1.8
−
3.0
−
−
−
−
1.8
−
3.0
50
160
−
25
160
−
V/mV
Characteristic
Supply Current
VCC/VEE = ± 20 V
VCC/VEE = ±15 V
Large Signal Voltage Gain
(VCC/VEE = ±15 V, VO = ±10 V, RL > 2.0 kW)
ICC,IEE
AV
mA
The following specifications apply over the operating temperature range.
Input Offset Voltage (RS ≤ 50 kW)
VIO
−
−
3.0
−
−
10
mV
Input Offset Current
IIO
−
−
20
−
−
70
nA
Avg Temperature Coefficient of Input Offset
Voltage (Note 2)
TA(min) ≤ TA ≤ TA (max)
DVIO/DT
−
3.0
15
−
6.0
30
mV/°C
Avg Temperature Coefficient of Input Offset
Current (Note 2)
+25°C ≤ TA ≤ TA (max)
TA(min) ≤ TA ≤ 25°C
DIIO/DT
nA/°C
−
−
0.01
0.02
0.1
0.2
−
−
0.01
0.02
0.3
0.6
IIB
−
−
100
−
−
300
nA
Large Signal Voltage Gain
(VCC/VEE = ±15 V, VO = ±10V, RL > 2.0 kW)
AVOL
25
−
−
15
−
−
V/mV
Input Voltage Range
VCC/VEE = ± 20 V
VCC/VEE = ±15 V
VICR
−15
−
−
−
+15
−
−
−12
−
−
−
+12
Common Mode Rejection (RS ≤ 50 kW)
CMR
80
96
−
70
90
−
dB
Supply Voltage Rejection (RS ≤ 50 kW)
PSR
80
96
−
70
96
−
dB
VO
±12
±10
±14
±13
−
−
±12
±10
±14
±13
−
−
V
ICC,IEE
−
1.2
2.5
−
−
−
mA
Input Bias Current
Output Voltage Swing
(VCC/VEE = ±15 V, RL = ±10 kW, RL > 2.0 kW)
Supply Currents (TA = TA(max), VCC/VEE = ± 20 V)
V
1. For supply voltages less than ±15 V, the absolute maximum input voltage is equal to the supply voltage.
2. Guaranteed by design.
http://onsemi.com
3
VIR, INPUT VOLTAGE RANGE (V)
20
VOR, OUTPUT VOLTAGE RANGE ( ± V)
LM301A, LM201A, LM201AV
Applicable to the Specified
Operating Temperature
Ranges
16
12
LM201A
only
Positive
8.0
Negative
4.0
0
0
5.0
10
15
VCC, ( −VEE), SUPPLY VOLTAGE (V)
20
Applicable to the Specified
Operating Temperature
Ranges
16
12
Minimum
RL = 10 k
8.0
Minimum
RL = 2.0 k
4.0
0
20
0
5.0
10
15
VCC, ( −VEE), SUPPLY VOLTAGE (V)
Figure 4. Minimum Input Voltage Range
20
Figure 5. Minimum Output Voltage Swing
100
2.5
I CC , I EE, SUPPLY CURRENTS (mA)
Applicable to the Specified
Operating Temperature
Ranges
94
AV, VOLTAGE GAIN (dB)
LM201A
only
88
LM201A
only
82
76
2.0
1.5
5.0
10
15
TA = +25°C
0.5
70
0
LM201A
only
1.0
0
20
0
5.0
10
15
VCC, ( −VEE), SUPPLY VOLTAGE (V)
VCC, ( −VEE), SUPPLY VOLTAGE (V)
Figure 6. Minimum Voltage Gain
Figure 7. Typical Supply Currents
20
Single−Pole Compensation
AV , VOLTAGE GAIN (dB)
160
140
315
120
270
100
80
C1 = 3.0 pF
225
Phase
180
60
135
C1 = 30 pF
40
20
0
−20
1.0
90
0
10
100
1.0 k
10 k
100 k
1.0 M
Single−Pole Compensation
15
10
C1 = 3.0 pF
5.0
45
Gain
VOR, OUTPUT VOLTAGE RANGE ( ±V)
180
C1 = 30 pF
0
1.0 k
10 M
10 k
100 k
1.0 M
10 M
f, FREQUENCY (Hz)
f, FREQUENCY (Hz)
Figure 8. Open Loop Frequency Response
Figure 9. Large Signal Frequency Response
http://onsemi.com
4
LM301A, LM201A, LM201AV
140
8.0
6.0
4.0
2.0
Input
0
−2.0
Output
−4.0
−6.0
100
225
80
180
Phase
60
135
40
90
20
45
Gain
0
−8.0
−10
0
10
20
30
40
50
60
70
80
0 0
−20
10
90
100
1.0 k
10 k
100 k
1.0 M 10 M 100 M
t, TIME (ms)
f, FREQUENCY (Hz)
Figure 10. Voltage Follower Pulse Response
Figure 11. Open Loop Frequency Response
10
VOR, OUTPUT VOLTAGE RANGE ( ± V)
18
VOR, OUTPUT VOLTAGE RANGE ( ± V)
Feedforward
Compensation
120
PHASE LAG (DEGREES)
Single−Pole Compensation
A V, VOLTAGE GAIN (dB)
VIR , VOR, VOLTAGE RANGE ( ±V)
10
Feedforward
Compensation
16
12
8.0
4.0
0
100 k
Feedforward
Compensation
8.0
Output
6.0
4.0
2.0
Input
0
−2.0
−4.0
−6.0
−8.0
−10
1.0 M
f, FREQUENCY (Hz)
10 M
0
Figure 12. Large Signal Frequency Response
1.0
2.0
3.0 4.0 5.0
t, TIME (ms)
6.0
7.0
8.0
Figure 13. Inverter Pulse Response
C2
R2
R1
−VI
R2
VCC
2
R1
6
R3
+VI
7
3
VI
VO
C1
C1 ≥
4
+
8
Frequency
Compensation
1
R3
R1 Cs
R1 +R2
C1
150 pF
Cs = 30 pF
VCC
6
3
+
4
1 VEE
Balance
7
2
VO
VEE
Balance
C2 =
1
2πfoR2
fo = 3.0 MHz
Figure 14. Single−Pole Compensation
Figure 15. Feedforward Compensation
http://onsemi.com
5
9.0
LM301A, LM201A, LM201AV
PACKAGE DIMENSIONS
PDIP−8
N SUFFIX
CASE 626−05
ISSUE L
8
NOTES:
1. DIMENSION L TO CENTER OF LEAD WHEN
FORMED PARALLEL.
2. PACKAGE CONTOUR OPTIONAL (ROUND OR
SQUARE CORNERS).
3. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
5
−B−
1
4
F
−A−
NOTE 2
L
C
J
−T−
N
SEATING
PLANE
D
H
M
K
G
0.13 (0.005)
M
T A
M
B
M
http://onsemi.com
6
DIM
A
B
C
D
F
G
H
J
K
L
M
N
MILLIMETERS
MIN
MAX
9.40
10.16
6.10
6.60
3.94
4.45
0.38
0.51
1.02
1.78
2.54 BSC
0.76
1.27
0.20
0.30
2.92
3.43
7.62 BSC
−−−
10_
0.76
1.01
INCHES
MIN
MAX
0.370
0.400
0.240
0.260
0.155
0.175
0.015
0.020
0.040
0.070
0.100 BSC
0.030
0.050
0.008
0.012
0.115
0.135
0.300 BSC
−−−
10_
0.030
0.040
LM301A, LM201A, LM201AV
SOIC−8
D SUFFIX
CASE 751−07
ISSUE AG
NOTES:
1. DIMENSIONING AND TOLERANCING PER
ANSI Y14.5M, 1982.
2. CONTROLLING DIMENSION: MILLIMETER.
3. DIMENSION A AND B DO NOT INCLUDE
MOLD PROTRUSION.
4. MAXIMUM MOLD PROTRUSION 0.15 (0.006)
PER SIDE.
5. DIMENSION D DOES NOT INCLUDE DAMBAR
PROTRUSION. ALLOWABLE DAMBAR
PROTRUSION SHALL BE 0.127 (0.005) TOTAL
IN EXCESS OF THE D DIMENSION AT
MAXIMUM MATERIAL CONDITION.
6. 751−01 THRU 751−06 ARE OBSOLETE. NEW
STANDARD IS 751−07.
−X−
A
8
5
S
B
1
0.25 (0.010)
M
Y
M
4
K
−Y−
G
C
N
DIM
A
B
C
D
G
H
J
K
M
N
S
X 45 _
SEATING
PLANE
−Z−
0.10 (0.004)
H
M
D
0.25 (0.010)
M
Z Y
S
X
J
S
SOLDERING FOOTPRINT*
1.52
0.060
7.0
0.275
4.0
0.155
0.6
0.024
1.270
0.050
SCALE 6:1
mm Ǔ
ǒinches
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
http://onsemi.com
7
MILLIMETERS
MIN
MAX
4.80
5.00
3.80
4.00
1.35
1.75
0.33
0.51
1.27 BSC
0.10
0.25
0.19
0.25
0.40
1.27
0_
8_
0.25
0.50
5.80
6.20
INCHES
MIN
MAX
0.189
0.197
0.150
0.157
0.053
0.069
0.013
0.020
0.050 BSC
0.004
0.010
0.007
0.010
0.016
0.050
0 _
8 _
0.010
0.020
0.228
0.244
LM301A, LM201A, LM201AV
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
N. American Technical Support: 800−282−9855 Toll Free
Literature Distribution Center for ON Semiconductor
USA/Canada
P.O. Box 61312, Phoenix, Arizona 85082−1312 USA
Phone: 480−829−7710 or 800−344−3860 Toll Free USA/Canada Japan: ON Semiconductor, Japan Customer Focus Center
2−9−1 Kamimeguro, Meguro−ku, Tokyo, Japan 153−0051
Fax: 480−829−7709 or 800−344−3867 Toll Free USA/Canada
Phone: 81−3−5773−3850
Email: [email protected]
http://onsemi.com
8
ON Semiconductor Website: http://onsemi.com
Order Literature: http://www.onsemi.com/litorder
For additional information, please contact your
local Sales Representative.
LM301A/D
Similar pages