ADLVIS-1660 2-CH CoaXPress Rugged SFF Vision Board Solution APPLICATIONS • Hyperspectral Imaging • Traffic Surveillance • Security Monitoring and Control • Unmanned Systems - High-Resolution Image/Video Capture • High-Speed Automated Optical Inspection • Very High-Resolution Line-Scan Image Acquisition • Military and Defense ISR • High Frame-Rate Motion Analysis and Recording FEATURES • Dual CoaXPress CXP-6 Ports • Quad Intel Core i7-4700EQ, 8GB DDR3 • Rugged, Small Form Factor PCIe/104 Design (96mm x 115mm) • 1,250 MB/s Camera Bandwidth • 2x CXP-6 DIN 1.0/2.3 Female Connectors • PoCXP Safe Power: 17W from Regulated 24VDC Output Per Port • Breakout 26-pin D-sub CXP System I/O with 12V Out • GENICAM Compliant • Euresys Memento Event Logging Tool • Expandable to 2x Dual-Port CXP-6 Modules • LEDs: A/B Status, FPGA Status, Board Status • C2C Link for Card to Card Link • -20C to +70C Operation; Optional -40C to +85C • BOM Includes: CPU, 1x CoaXPress Module, 2x DIN cables DESCRIPTION The ADLVIS-1660 Dual CXP-6 is a rugged, small form factor (SFF) CoaXPress solution intended for military and industrial applications. It’s a two-board PCIe/104 solution featuring a Quad Intel i7-4700EQ processor with a dual CXP-6 module using the x16 PCIe/104 bus resulting is a stunning 1,250 MB/s effective camera bandwidth. The ADLVIS-1660 features include small outline coaxial cabling for DIN1.0/2.3 connectors optimized for SFF design. It supports PoCXP, is GENICAM compliant and includes Euresys Memento event logging for efficient application software development. A second CXP-6 module can easily be added to support four 1xCXP-6 cameras or two 2xCXP-6 cameras. The ADLVIS-1660 targets rugged, Small Form Factor high-performance vision solutions in a host of military and industrial environments. It enables very high-definition applications as well as high-framerate applications in less than ideal environments for security and surveillance, traffic management, science, machine vision and a vast range of next-generation vision products. *Data subject to change without notice. ADL Corporate: 4411 Morena Blvd. Suite 101 | San Diego, CA 92117-4345 ADL Germany: Eiserfelder Straße 316 | D-57080 Siegen, Germany T: 858.490.0597 [email protected] T: +49 (0) 271.250.810.0 [email protected] F: 858.490.0599 www.adl-usa.com F: +49 (0) 271.250.810.20 www.adl-europe.com ADLVIS-1660 2-CH CoaXPress Rugged SFF Vision Board Solution TECHNICAL SPECIFICATIONS - ADLVIS-1660 FEATURE FUNCTION REMARKS Interface Features Connectors • 2x CXP-6 DIN 1.0/2.3 female connectors • System I/O: 26p D-sub connector • Camera Power Input: 4p 0.1 in Molex KK 7478 male • C2C Link: 2x3 6p 0.1 in header Lamp Indicators • ‘A’ ‘B’ HOST LEDS: 2x bi-color red/green • FPGA Status LED: bi-color red/green • Board Status LED: bi-color red/green Interface Standards • CoaXPress 1.0 and 1.1 Aggregated Camera Data Transfer Rate • 12.5 Gbits/s (1250MB/s) Maximum • Power Over CoaXPress PoCXP Safe Power • 17W of 24VDC regulated power per CoaXPress port • PoCXP device detection and automatic power-on • Overload and short-circuit protections 24V Power Input • Connects to Auxiliar Power input on CoaXpress module • Camera Support Types • Area-Scan Cameras: • Gray-scale and color (RGB and Bayer CFA) • Single-tap (1x-1Y) progressive scan Pixel Formats Supported • Raw, Monochrome, Bayer, RGB, and RGBA (PFNC names): • Raw • Mono8, Mono10, Mono12, Mono14, Mono16 • BayerXX8, BayerXX10, BayerXX12, BayerXX14, BayerXX16 where XX=GR, RG, GB, or BG • RGB8, RGB10, RGB12, RGB14, RGBA16 Area Scan Camera Control • External hardware trigger with optional delay and trigger decimation • Accurate control of strobe position with support for early/late strobe pulses GPIO (General Purpose Input/Output 10 I/O Lines • 2x differential inputs (DIN) • 2x single-ended TTL I/O (TTLIO) • 4x Isolated Inputs (IIN) • 2x Isolated Outputs (IOUT) Usage • Any I/O input line can be used by any LIN tool of the I/O Toolbox • I/O input lines can be used by any QDC tool in I/O toolbox to decode A/B signals of a motion encoder • LIN and QDC tool outputs can be further processed by other tools (DIV, MDV, DEL) to generate trigger events such as: cycle trigger, cycle sequence trigger, start-of-scan trigger and end-of-scan trigger. *Data subject to change without notice. ADL Corporate: 4411 Morena Blvd. Suite 101 | San Diego, CA 92117-4345 ADL Germany: Eiserfelder Straße 316 | D-57080 Siegen, Germany T: 858.490.0597 [email protected] T: +49 (0) 271.250.810.0 [email protected] F: 858.490.0599 www.adl-usa.com F: +49 (0) 271.250.810.20 www.adl-europe.com ADLCXP-1660 2-CH CoaXPress Rugged SFF Vision Board Solution TECHNICAL SPECIFICATIONS - ADLCXP-1660 FEATURE (CONTINUED) FUNCTION REMARKS I/O Toolbox I/O Toolbox Configuration Tools • Line Input tool (LIN): Edge detector for rising/falling edges of any selected input line • Quadrature Decoder tool (QDC): Selected transitions, Backward motion compenasator, 32-bit up/down counter • Divider tool: (DIV): Triggeres every Nth input event from any I/O toolbox event source • Multiplier/Divider tool: (MDV): Generates m events every d input event from any I/O toolbox event source • Delay tool (DEL): Delay up to 16 events from one or two I/O toolbox event sources • On-Board Processing On-Board Memory • 512MB Data Stream Statistics • Measurement of: • Frame rate (area-scan only) • Line Rate • Data Rate • Configurable Averaging interval Event Signaling and Counting • EVENT_NEW_BUFFER event on newly filled buffers • Custom Event Sources: I/O toolbox events, Camera & Illumination control events • CoaXPress data stream events; CoaXPress host interface events • Event-specific data • State of all System I/O lines sampled at the event occurence ORDERING INFORMATION ITEM CODE PART # DESCRIPTION ADLCXP-1660 360330 ADLCXP-1600, -20C - +70C ADLCXP-1660-EX 360331 ADLCXP-1600, -40C -+85C ADLCXP-1660-2 360332 Additional 2x CXP-6 Module w cables 360333 Option System I/O Breakout Board ADLQM87PC-CK 292770 CPU Cable Kit for ADLQM87PC ADLMES8200 Chassis CALL Integration into MIL-STD 810 ADLMES8200 enclosure Custom SFF Chassis CALL Custom design, development and system integration PCIe/104 Board Options and Accessories MES8200 Spreader Heat Spreader for MES8200 Chassis *Data subject to change without notice. ADL Corporate: 4411 Morena Blvd. Suite 101 | San Diego, CA 92117-4345 ADL Germany: Eiserfelder Straße 316 | D-57080 Siegen, Germany T: 858.490.0597 [email protected] T: +49 (0) 271.250.810.0 [email protected] F: 858.490.0599 www.adl-usa.com F: +49 (0) 271.250.810.20 www.adl-europe.com