BAT54WS-V Vishay Semiconductors Small Signal Schottky Diode Features • These diodes feature very low turn-on voltage and fast switching • These devices are protected by a PN junction guard ring against excessive voltage, such as electrostatic discharges • AEC-Q101 qualified • Compliant to RoHS directive 2002/95/EC and in accordance to WEEE 2002/96/EC 20145 Mechanical Data Case: SOD-323 Weight: approx. 4.3 mg Packaging codes/options: GS18/10k per 13" reel (8 mm tape), 10k/box GS08/3k per 7" reel (8 mm tape), 15k/box Parts Table Part BAT54WS-V Ordering code Type marking Remarks BAT54WS-V-GS18 or BAT54WS-V-GS08 L4 Tape and reel Absolute Maximum Ratings Tamb = 25 °C, unless otherwise specified Parameter Test condition Repetitive peak reverse voltage Value Unit VRRM 30 V 1) mA IFRM 300 1) mA IFSM 600 1) mA Ptot 150 1) mW IF Forward continuous current Repetitive peak forward current tp < 1 s Surge forward current Symbol Power dissipation 1) 200 Note 1) Valid provided that electrodes are kept at ambient temperature Thermal Characteristics Tamb = 25 °C, unless otherwise specified Parameter Test condition Thermal resistance junction to ambient air Maximum junction temperature Storage temperature range Symbol RthJA Value Unit 1) K/W 650 Tj 125 °C Tstg - 65 to + 150 °C Note 1) Valid provided that electrodes are kept at ambient temperature Document Number 85667 Rev. 1.5, 05-Aug-10 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] www.vishay.com 1 BAT54WS-V Vishay Semiconductors Electrical Characteristics Tamb = 25 °C, unless otherwise specified Parameter Reverse breakdown voltage Test condition Symbol Min. tested with 100 µA pulses V(BR) 30 Max. Unit VR = 25 V IR 2 µA IF = 0.1 mA VF 240 mV IF = 1 mA VF 320 mV IF = 10 mA VF 400 mV Leakage current 1) Forward voltage 1) V IF = 30 mA VF 500 mV IF = 100 mA VF 800 mV VR = 1 V, f = 1 MHz CD 10 pF IF = IR = 10 mA; IR = 1 mA; RL = 100 Ω trr 5 ns Diode capacitance Reverse recovery time Typ. Note 1) Pulse test: tp < 300 µs, θ < 2 % Typical Characteristics Tamb = 25 °C, unless otherwise specified 1000 T j = 125 °C T j = 125 °C 100 I R - Reverse Current (µA) I F - Forward Current (mA) 1000 - 40 °C 10 1 25 °C 0.1 0.01 0 100 100 °C 75 °C 10 50 °C 1 25 °C 0.1 0.01 0.2 18867 1.2 0.4 0.6 0.8 1 VF - Forward Voltage (V) 1.4 0 18869 Figure 1. Typical Forward Current vs. Forward Voltage vs. Various Temperatures 5 10 15 20 25 VR - Reverse Voltage (V) 30 Figure 3. Typical Reverse Current vs. Reverse Voltage vs. Various Temperatures C D - Typical Capacitance (pF) 14 12 10 8 6 4 2 0 0 18868 4 8 12 16 20 24 VR - Reverse Voltage (V) 28 Figure 2. Typical Capacitance vs. Reverse Applied Voltage www.vishay.com 2 For technical questions within your region, please contact one of the following: Document Number 85667 [email protected], [email protected], [email protected] Rev. 1.5, 05-Aug-10 BAT54WS-V Vishay Semiconductors 0.1 (0.004) max. 0° to 8 ° 0.15 (0.006) 0.10 (0.004) 0.2 (0.008) 0.8 (0.031) 1.15 (0.045) Package Dimensions in millimeters (inches): SOD-323 0.40 (0.016) 0.25 (0.010) 1.95 (0.077) 1.60 (0.063) 2.50 (0.098) 1.1 (0.043) 2.85 (0.112) 1.5 (0.059) 0.20 (0.008) 0.40 (0.016) Cathode bar Foot print recommendation: Document no.:S8-V-3910.02-001 (4) Created - Date: 24.August.2004 Rev. 5 - Date: 23.Sept.2009 17443 Document Number 85667 Rev. 1.5, 05-Aug-10 1.6 (0.063) 0.6 (0.024) 0.6 (0.024) 0.6 (0.024) For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] www.vishay.com 3 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Revision: 12-Mar-12 1 Document Number: 91000