FSA Series Flash SATA Disk /SATAIII SLC, MLC 2.5” SATA Flash Disk /SLC (MLC) Introduction Features ● SATA III standard interface, Excellent data transfer speed Capacity: SLC : 4GB ~ 512GB MLC : 8GB ~ 512GB ● 2.5" standard form factor ● Suitable for high demanding applications ● Well performed under harsh operating environment ● Anti-vibration & shock resistance ● Data integrity with Error Detection Code/Error Correction Code (EDC/ECC) ● Intelligent error recovery system ● Perfect replacement of hard drive ● High operating reliability & durability ● Enhanced power cycling management & Low power consumption ● iSMART disk health monitoring Axiomtek’s FSA (Flash SATA Disk) series is a high performance 2.5” flash disk and fully compatible with SATAIII standard which make it an ideal replacement for conventional SATA HDD without any driver or system modification. This 2.5” SATAIII flash disk is provided with huge capacities up to 512GB to meet diverse needs of data storage. With the features of high capacity storage, data integrity, anti-vibration and low power consumption, the FSA series is surely a solid solution for expanding an industrial computer’s memory. System Ordering Information General Specification Capacity SLC SLC : 4GB ~ 512GB MLC : 8GB ~ 512GB Interface SATA III 6.0 Gbp/s Connector 7+15 pin male Flash type SLC /MLC Form Factor 2.5” Data Transfer Rate SLC: Read: 68~490 MB/sec (max.) Write: 52~430 MB/sec (max.) MLC: Read: 100~415 MB/sec (max.) Write: 20~200 MB/sec (max.) Thermal Sensor ST-Optional; WT-Supported External DRAM Buffer N/A H/W Write Protect N/A Pin7 Power N/A ATA Security Supported S.M.A.R.T. Supported Environmental Specification Operating Temperature 0˚C ~ 70˚C (32°F ~ 158°F) (standard temp.) -40˚C ~ 85˚C (-40 °F ~185°F) (industrial temp.) Storage Temperature -55˚C ~ 95˚C (-67°F ~ 203°F) Humidity 10% ~ 95%, non-condensing Vibration 20G (7 ~ 2000Hz) Shock 1500G/0.5ms System Reliability ECC technology High reliability based on the internal ECC function MTBF >3,000,000 hours Flash P/E Cycle Limit SLC:100,000 P/E cycles MLC: 3,000 P/E cycles Wear-leveling Supported Power Requirment DC Input Voltage +5 DC ± 5% Power Consumption SLC 3.0 W (5V x 600 mA ) MLC 2.1 W (5V x 428 mA ) Physical Specification Enclosure Material Aluminum Mechanical Cover Dimensions 69.8 x 100 x 7.0 mm (W x L x H) MLC 69.8 x 100 x 9.2 mm (W x L x H) SLC *Tolerance ± 0.25 mm Models (Standard temp. SLC) FSA004GSC1T FSA008GSC1T FSA016GSC1T FSA032GSC1T FSA064GSC1T FSA128GSC1T FSA256GSC1T FSA512GSC1T Models (Industrial temp. SLC) FSA004GSW1T FSA008GSW1T FSA016GSW1T FSA032GSW1T FSA064GSW1T FSA128GSW1T FSA256GSW1T FSA512GSW1T Interface Capacity SATAIII 6.0G SATAIII 6.0G SATAIII 6.0G SATAIII 6.0G SATAIII 6.0G SATAIII 6.0G SATAIII 6.0G SATAIII 6.0G 4GB 8GB 16GB 32GB 64GB 128GB 256GB 512GB Interface Capacity SATAIII 6.0G SATAIII 6.0G SATAIII 6.0G SATAIII 6.0G SATAIII 6.0G SATAIII 6.0G SATAIII 6.0G 8GB 16GB 32GB 64GB 128GB 256GB 512GB MLC Models (Standard temp. MLC) FSA008GMC5T FSA016GMC5T FSA032GMC5T FSA064GMC5T FSA128GMC5T FSA256GMC5T FSA512GMC5T Models (Industrial temp. MLC) FSA008GMW5T FSA016GMW5T FSA032GMW5T FSA064GMW5T FSA128GMW5T FSA256GMW5T FSA512GMW5T * All specifications and photos are subject to change without notice.