DATA SHEET LND820/821/822/823 POWER MOSFET GENERAL DESCRIPTION The LND820 series provides the designer with the best combination of fast switching, ruggedized device design, low on-resistance and cost-effectiveness. The TO-220 package is universally preferred for all commercial-industrial applications at power dissipation levels to approximately 50 watts. The low thermal resistance and low package cost of the TO-220 contribute to its wide acceptance throughout the industry. SYMBOL FEATURES • VDSS =450V-500V RDS (on) = 3.0 Ω-4.0 Ω ID=2.2A and 2.5A • • • • • Dynamic dv/dt Rating Repetitive Avalanche rated Fast Switching Ease of Paralleling Simple Drive Requirement PIN DIAGRAM TO-220 • Linear Dimensions, Inc. • 445 East Ohio Street, Chicago IL 60611 USA • tel 312.321.1810 • fax 312.321.1830 • www.lineardimensions.com • LND820/821/822/823 ABSOLUTE MAXIMUM RATING Symbol Parameter Max ID@Tc=25ºC Continuous Drain Current,VGS @ 10V 2.5 ID@Tc=100ºC Continuous Drain Current, VGS @ 10V 1.6 IDM Pulsed Drain Current(1) 8.0 Units A PD @Tc=25ºC Power Dissipation 50 W ID@Tc=25ºC Linear Derating Factor 0.40 W/ºC VGS Gate-to-Source Voltage ±20 V EAS Single Pulse Avalanche Energy(2) 210 mJ IAR Avalanche Current (1) 2.5 A EAR Repetitive Avalanche Energy (1) 5.0 mJ dv/dt Peak Diode Recovery dv/dt(3) 3.5 V/ns TJ Operating Junction and Storage temperature Range TSTG -55 to +150 ºC 300 Soldering Temperature, for 10 seconds (1.6mm from case) THERMAL RESISTANCE Symbol Parameter Min Typ Max RoJC Junction-to-case - - 2.5 RoCS Case-to-Sink, Flat, Greased Surface - 0.50 - RoJA Junction-to-Ambint - - 62 Units ºC/W • Linear Dimensions, Inc. • 445 East Ohio Street, Chicago IL 60611 USA • tel 312.321.1810 • fax 312.321.1830 • www.lineardimensions.com • LND820/821/822/823 ELECTRICAL CHARACTERISTICS (TC=25°C unless otherwise specified) Symbol Parameter V(BR)DSS Drain-to-source Breakdown Voltage ∆V(BR)DSS / ∆TJ Breakdown Voltage Temp. Coefficient ID(on) On-State Drain Current(Note 2) RDS(ON) Static Drain-to-Source OnResistace VGS(th) Gate Threshold Voltage VDS=VGS, ID=250µA 2.0 gfs Forward Transconductance VDS=50V,ID =1.5A(4) 1.5 IDSS Drain-to-source Leakage Current (TC=125ºC) VDS=500V,VGS =0V VDS= 400V,VGS = 0V - VGS=-20V - - 100 VGS=-20V - - -100 ID=2.1A VDS=400V VGS =10V (4) - - 24 3.3 13 - 8.0 8.6 33 16 - 4.5 - 7.5 - 360 92 - 37 td(on) tr td(off) tf Gate-to-Source Forward Leakage Gate-to-Source Reverse Leakage Total Gate Charge Gate-to-Source Charge Gate-to-drain(“Miller”) Charge Turn-on Delay Time Rise time Turn-off Delay time Fall time LD Internal Drain Inductance LS Input Source Inductance Ciss Coss Input Capacitance Output Capacitance Reverse Transfer Capacitance IGSS Qg Qqs Crss LND-820/822 LND821/823 Conditions Min Typ Max Units VGS=0V, ID = 250µA 500 450 - - V - 0.59 - V/ºC 2.5 2.2 - - A 3.0 4.0 Ω - 4.0 V - - S 25 250 µA µA Reference to 25ºC ID=1mA LND820/821 LND821/823 LND820/821 LND822/823 VGS > ID(on) x RDS(on)Max, VGS=10V VGS =0V,ID =1.5A(4) nA VDD =250V ID=2.1A RG=18Ω RD=100Ω (4) Between lead 6mm (0.25 in.) From package and center of die contact VGS=0V VDS=25V F=1.0 MHz nC ns nH pF • Linear Dimensions, Inc. • 445 East Ohio Street, Chicago IL 60611 USA • tel 312.321.1810 • fax 312.321.1830 • www.lineardimensions.com • LND820/821/822/823 SOURCE-DRAIN RATING AND CHARACTERISTICS Symbol Parameter Conditions Min Typ Max MOSFET symbol showing the integral reverse p-n junction diode - - 2.5 ISM Continuous Source Current Pulsed Source Current (Body Diode) (1) - - 8.0 VSD Diode Forward Voltage - - 1.6 V trr Reverse Recovery Time - - 520 nS Qrr Reverse Recovery Charge tON Forward Turn-On Time IS TJ=25°C, IS=2.5A, VGS=0V(4) TJ=25°C, IF=2.1A, di/dt=100A/µs (4) Units A 0.70 1.4 µC Intrinsic turn-on time is negligible (turn-on is dominated by LS+LD) Notes : 1 : Repetitvie rating :pulse width limited by max. junction temperature 2 : VDD=50V, starting TJ =25°C,L=60mH RG=25Ω, IAS =2.5A 3 : ISD ≤ 2.5A, di/dt≤50 A/µs, VDD ≤ V(BR)DSS ,TJ≤150°C 4 : Pulse width≤ 300µs; duty cycle≤ 2% • Linear Dimensions, Inc. • 445 East Ohio Street, Chicago IL 60611 USA • tel 312.321.1810 • fax 312.321.1830 • www.lineardimensions.com •