AMR3 SERIES AC - DC DIN RAIL MOUNTABLE POWER SUPPLY INDUSTRIAL CONTROL EQUIPMENT FEATURES ‧UNIVERSAL INPUT 90~264VAC ‧SHORT CIRCUIT PROTECTION ‧INTERNAL INPUT FILTER ‧LOW PROFILE FOR BUILDING AUTOMATION ‧3 YEARS WARRANTY R R R H H H Class I, Div 2 UL 1310 a UL 60950-1 IND. CONT. EQ. UL 508 MODEL LIST MODEL NO. INPUT VOLTAGE AMR3-05 90~264 VAC AMR3-12 AMR3-15 AMR3-24 EN 60950-1 OUTPUT OUTPUT WATTAGE VOLTAGE Single Output Models OUTPUT CURRENT EFF. (min.) EFF. (typ.) 22.5 WATTS + 5 VDC 4500 mA 72% 75% 90~264 VAC 33 WATTS + 12 VDC 2750 mA 80% 83% 90~264 VAC 36 WATTS + 15 VDC 2400 mA 81% 84% 90~264 VAC 36 WATTS + 24 VDC 1500 mA 81% 84% SPECIFICATION All Specifications Typical At Nominal Line, Full Load, 25oC Unless Otherwise Noticed GENERAL Characteristics Vi nom, Io nom Input-Output Isolation resistance Ambient temperature Input-Output, @ 500VDC Operating at Vi nom Derating (see derating curve) Storage temperature Relative humidity 45 3,000/4,242 o KHz VAC / VDC MΩ + 71 -40 -40 + 85 Vi nom, Io nom 20 95 Vi nom, Io min Bellcore Issue 6 @40oC, GB Installation position Pollution degree unit 65 Vi nom, from +56 C to +71 C Non operational MTBF Dimension Cooling max. 100 o Temperature coefficient Altitude during operation typ. min. Conditions Switching frequency Isolation voltage 2.5 ± 0.03 o C o %/ C o C % RH % / oC 5V 757,000 Hours 12V 15V 716,000 Hours 724,000 Hours 24V 748,000 IEC 60068-2-13 4,850 Hours m mm L91 x W53 x D56.5 Free air convection Vertical ( other direction may derating using ) 2 INPUT SPECIFICATIONS Characteristics Rated input voltage Absolute input max. range Input current Rated input current Io nom Ta min ... Ta max, Io nom max. unit VAC 100 240 90 264 VAC 120 375 VDC Vi : 115 / 230 VAC, Io nom DC in 5V 12V, 15V, 24V Vi : 90 VAC, Io nom 5V 12V, 15V, 24V Vi nom, Io nom Inrush current Vi : 115 / 230 VAC , Io nom 2014.08.11 typ. AC in Line frequency www.chinfa.com min. Conditions 480 / 310 mA 680 / 410 47 mA 600 mA 900 mA 63 25 / 50 Hz A [email protected] P1 AMR3 SERIES SPECIFICATION o All Specifications Typical At Nominal Line, Full Load, 25 C Unless Otherwise Noticed INPUT SPECIFICATIONS Characteristics Power dissipation Leakage current Conditions Vi : 230 VAC, Io nom min. typ. max. unit 5V 7.5 W 12V 15V 7.3 W 7.4 W 24V 7.1 W Input-Output 0.25 mA max. unit +1 % OUTPUT SPECIFICATIONS Characteristics Conditions min. Output voltage accuracy (Adjusted before shipment) Vi nom, Io max 0 Minimum load Line regulation Vi nom Io nom, Vi min ...Vi max 0 Load regulation Vi nom, Io min ...Io nom Voltage trim range Vi nom, 0.8 Io nom Rated continuous loading Turn on time Vi nom, Io nom Vi nom, Io nom Rise time Vi nom, Io nom Vi nom, Io nom % 5.5 VDC 5 12V 15V 12 14 VDC 13.5 16.5 VDC 24 28 4.5A @ 5VDC / 4A @ 5.5VDC VDC 2.75A @ 12VDC / 2.3A @ 14VDC 2.4A @ 15VDC / 2.1A @ 16.5VDC 1.5A @ 24VDC / 1.25A @ 28VDC 24V Vi : 115 / 230 VAC , Io nom % ±1 5V 12V 15V Hold up time % ±1 24V 5V Vi nom, typ. ms 20 / 100 with 3500μF CAP with 3500μF CAP 1,000 ms 1,500 ms 150 ms 500 ms Fall time Transient recovery time Vi nom, Io nom 150 ms Vi nom, 1~0.5 Io nom Ripple & noise Vi nom, Io nom, BW = 20MHz 2 50 mV Power back immunity Vi nom, Io nom Capacitor load Vi nom, Io nom DC ON indicator threshold at start up (Green LED) Vi nom, Io nom DC LOW indicator threshold after start up (Red LED) Vi nom, Io nom 5V 7.5 VDC 12V 15V 18 VDC 22 VDC 24V 35 3,500 VDC μF 5V 3.5 4.5 VDC 12V 15V 9 10.8 VDC 11 13.5 VDC 24V 5V 19.2 21.6 VDC 3.5 4.5 VDC 12V 15V 9 10.8 VDC 11 13.5 VDC 24V Efficiency ms Vi nom, Io nom, Po / Pi VDC 19.2 21.6 Up to 84%, See model list and typ efficiency curve CONTROL AND PROTECTION Characteristics min. Conditions Input fuse Internal surge voltage protection Rated over load protection Over voltage protection typ. max. T2A / 250VAC internal IEC 61000-4-5 Vi nom (see typ current limited curve) Vi nom, Io nom (Auto Recovery) Varistor 110 150 % 5V 5.75 6.5 VDC 12V 15V 15 16.5 VDC 18 20 VDC 24V 30 33 VDC Output short circuit Fold forward Degree of protection IP20 www.chinfa.com 2014.08.11 unit [email protected] P2 AMR3 SERIES SPECIFICATION All Specifications Typical At Nominal Line, Full Load, 25oC Unless Otherwise Noticed APPROVALS AND STANDARDS UL / cUL UL 508 Listed UL 60950-1, UL 1310 Class 2 Power Recognized ISA 12.12.01 (Class I, Division 2, Groups A, B, C and D) TUV EN 60950-1 CE EN 61000-6-3, EN 55022 Class B, EN 61000-3-2, EN 61000-3-3 EN 61000-6-2, EN 55024, EN 61000-4-2 Level 4, EN 61000-4-3 Level 3 EN 61000-4-4 Level 4, EN 61000-4-5 L-N Level 3 EN 61000-4-6 Level 3, EN 61000-4-8 Level 4, EN 61000-4-11 ENV 50204 Level 2, EN 61204-3 Vibration resistance meet IEC 60068-2-6 (Mounting on rail : 10-500 Hz, 2G, along X, Y, Z each Axis, 60 min for each Axis ) Shock resistance meet IEC 60068-2-27 (15G, 11ms, 3 Axis, 6 Faces, 3 times for each Face) PHYSICAL CHARACTERISTICS Case size 91 x 53 x 56.5 mm (3.58 x 2.09 x 2.22 inches) Case material Plastic Weight 190g Packing 0.25kg ; 64 / 17kg / 2.28CUFT MECHANISM & PIN CONFIGURATION mm [inch] CONSTRUCTION 53.00 [2.09] Easy snap-on mounting onto the DIN-Rail (TS35/7.5 or TS35/15), unit sits safely and firmly on the rail; no tools required even to remove INSTALLATION 12.00 [0.47] 11.00 [0.43] 4 3 2 1 45.00 [1.77] ++ N 5 6 56.50 [2.22] 32.40 [1.28] 91.00 [3.58] 51.50 [2.02] L 48.90 [1.93] Vout ADJ. DC LO DC ON 91.00 [3.58] Ventilation / Cooling Normal convection All sides 25m/m free space For cooling recommended Connector size range AWG24-12 (0.2~2.5mm2) flexible / solid cable -Connector can withstand torque at maximum 6 pound-inches. 7m/m stripping at cable end recommends. Use copper conductors only, 60/75 oC GENERAL TOLERANCE 0.00[0.00] - 30.00[1.18] ±0.30[0.01] 30.00[1.18] - 120.00[4.72] ±0.50[0.02] PIN ASSIGNMENT Designation 1, 2 - Negative output terminal + Positive output terminal L Input terminals (phase conductor, no polarity at DC input) N Input terminals (neutral conductor, no polarity at DC input) Vout ADJ. Trimmer-potentiometer for Vout adjustment DC ON Operation indicator LED DC LO DC Low indicator LED 5 OTHER 6 IN 3, 4 OUT PIN NO. www.chinfa.com 2014.08.11 Description [email protected] P3 AMR3 SERIES CIRCUIT SCHEMATIC ‧Block diagram for AMR3 series L Fuse Line Filter N Inrush Current Switching Limiter and Device rectifier PWM Controller Vo + Rectifier Vo - Opto Isolation Reference & Error Amp. Opto Isolation Over Voltage Detection Vout ADJ. DC ON (Green LED) DC LO (Red LED) Output Level Detection TYP. CURRENT LIMITED CURVE Output Voltage [ % ] AMR3-24 100 75 230 Vac 115 Vac 50 25 0 100 110 120 130 140 150 160 170 180 Power out [ % ] DERATING CURVE TYP. EFFICIENCY CURVE AMR3-24 85 EFFICIENCY [ % ] Power out [ % ] 100 62.5 Safe Operating Area 80 75 70 65 230 Vac 115 Vac 60 55 50 0 -40 o 56 Temperature [ C ] www.chinfa.com 2014.08.11 71 10 25 50 75 100 Power out [ % ] [email protected] P4