HH- / HHS-109 Hybrid Junction, 5 - 200 MHz Rev. V3 Features FP-2 (HH-109) • 0° - 180° Hybrid with High Isolation • Usable from 500 KHz - 500 MHz • MIL-STD-202 Screening Available Description 3 dB Hybrids are ideal for dividing a signal into two signals of equal amplitude and a constant 90° or 180° phase differential and for Quadrature combining or performing summation/differential combining. SF-1 (HHS-109) Pin Configuration (HH-109) Pin No. Function Pin No. Function 1 A 5 B 2 GND 6 GND 3 GND 7 GND 4 C 8 D Functional Diagram C 0° A Pin Configuration (HHS-109) 0° Hybrid Magic Tee 180° Pin No. Function Pin No. Function 1 A 3 B 2 C 4 D B 0° D 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. HH- / HHS-109 Hybrid Junction, 5 - 200 MHz Rev. V3 Electrical Specifications1: TA = -55°C to +85°C Parameter Test Conditions Frequency Units Min Typ Max Insertion Loss Less Coupling 5 - 200 MHz dB — — 1.4 5 - 100 MHz 100 - 200 MHz dB dB 30 25 — — — — Isolation Amplitude Balance — 5 - 200 MHz dB — — 0.3 VSWR — 5 - 100 MHz 100 - 200 MHz Ratio Ratio — — — — 1.5:1 1.7:1 Phase Balance — 5 - 100 MHz 100 - 200 MHz ° ° — — — — 4 8 Impedance — — Ohms — 50 — Input Power — — Watts — — 0.5 1. All specifications apply with 50 ohm source and load impedance. Typical Performance Curves Insertion Loss Isolation P orts A- C, A- D P orts A- B, C- D 3 60 50 2 40 1 30 20 0 0.5 1.0 2.0 5.0 10.0 20.0 50.0 100.0 200.0 500.0 1 1 2 5 10 20 50 100 200 500 Frequency (MHz) Frequency (MHz) VSWR Ordering Information All P orts 3.00 Part Number Package HH-109 PIN FP-2 HHS-109 PIN SF-1 2.50 2.00 1.50 1.00 0.5 1.0 2.0 5.0 10.0 20.0 50.0 100.0 200.0 500.0 Frequency (GHz) 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.