GAS GENERATOR SET MTU 6V0072 GS40 40 kWe /60 Hz /Standby 208 - 600V SYSTEM RATINGS Standby Voltage (L-L) Phase PF Hz Natural Gas Ratings: Amps Natural Gas Ratings: kW/kVA LP Gas Ratings: Amps LP Gas Ratings: kW/kVA skVA@30% Voltage Dip Generator Model Temp Rise Connection 240V* 1 1 60 240V* 1 1 60 208V* 3 0.8 60 240V* 3 0.8 60 480V* 3 0.8 60 600V* 3 0.8 60 167 167 139 120 60 48 40/40 40/40 40/50 40/50 40/50 40/50 167 167 139 120 60 48 40/40 40/40 40/50 40/50 40/50 40/50 128 362CSL1604 130 °C/40 °C 116 361CSL1612 130 °C/40 °C 125 284PSL1742 130 °C/40 °C 125 284PSL1742 130 °C/40 °C 167 284PSL1742 130 °C/40 °C 92 361PSL1632 130 °C/40 °C 12 LEAD ZIG-ZAG 4 LEAD 12 LEAD WYE 12 LEAD DELTA 12 LEAD WYE 4 LEAD WYE * UL 2200 Offered CERTIFICATIONS AND STANDARDS // Generator set is designed and manufactured in facilities certified to standards ISO 9001:2008 and ISO 14001:2004 // Seismic Certification – Optional – IBC Certification – OSHPD Pre-Approval // UL 2200 / CSA – Optional – UL 2200 Listed – CSA Certified // Performance Assurance Certification (PAC) - Generator Set Tested to ISO 8528-5 for Transient Response - Verified product design, quality and performance integrity - All engine systems are prototype and factory tested // Power Rating - Accepts Rated Load in One Step Per NFPA 110 2 / // / MTU 6V0072 GS40 (40 kWe) - Standby STANDARD FEATURES* MTU Onsite Energy is a single source supplier Global Product Support 2 Year Standard Warranty 4.3L Engine - 4.3 Liter Displacement - 4-Cycle // Optional Fuels: LP Liquid and Dual Fuel // Engine-generator resilient mounted // Complete Range of Accessories // // // // Generator - Brushless, Rotating Field Generator - 2/3 Pitch Windings - 300% Short Circuit Capability with Optional Permanent Magnet Generator (PMG) // Digital Control Panel(s) - UL Recognized, CSA Certified, NFPA 110 - Complete System Metering - LCD Display // Cooling System - Integral Set-Mounted - Engine-Driven Fan // STANDARD EQUIPMENT* // Engine Air Cleaner Oil Pump Oil Drain Extension and S/O Valve Full Flow Oil Filter Jacket Water Pump Thermostat Blower Fan and Fan Drive Radiator - Unit Mounted Electric Starting Motor - 12V Governor – Electronic Isochronous Base - Formed Steel SAE Flywheel and Bell Housing Charging Alternator - 12V Battery Box and Cables Flexible Fuel Connectors Flexible Exhaust Connection EPA Certified Engine // Generator NEMA MG1, IEEE and ANSI standards compliance for temperature rise and motor starting Self-Ventilated and Drip-Proof Superior Voltage Waveform Solid State, Volts-per-Hertz Regulator ±1% Voltage Regulation No Load to Full Load Brushless Alternator with Brushless Pilot Exciter 4 Pole, Rotating Field 130 °C Max. Standby Temperature Rise 1 Bearing, Sealed Flexible Coupling Full Amortisseur Windings 125% Rotor Balancing 3-Phase Voltage Sensing 100% of Rated Load - One Step 5% Max. Total Harmonic Distortion // Digital Control Panel(s) Digital Metering Engine Parameters Generator Protection Functions Engine Protection SAE J1939 Engine ECU Communications Windows®-Based Software Multilingual Capability Remote Communications to RDP-110 Remote Annunciator Programmable Input and Output Contacts UL Recognized, CSA Certified, CE Approved Event Recording IP 54 Front Panel Rating with Integrated Gasket NFPA110 Compatible * Represents standard product only. Consult Factory/MTU Onsite Energy Distributor for additional configurations. 3 / // / MTU 6V0072 GS40 (40 kWe) - Standby APPLICATION DATA // Engine Manufacturer Model Type Arrangement Displacement: L (in3) Bore: cm (in) Stroke: cm (in) Compression Ratio Rated RPM Engine Governor Max. Power (NG): kWm (bhp) Max. Power (LP): kWm (bhp) Speed Regulation Air Cleaner // 12 925 Fuel Inlet - Vaporous Supply Fuel Supply Connection Size Fuel Supply Pressure: mm H20 (in. H20) // 4.2 (1.1) 7.2 (1.9) 21.6 (5.7) Electrical Electric Volts DC Cold Cranking Amps Under -17.8 °C (0 °F) // GM 4.3L 4-Cycle 6-V 4.3 (262) 10.2 (4) 8.8 (3.5) 9.4:1 1,800 Bosch 49.6 (66.5) 53.2 (71.4) C/F Dry Fuel Consumption (NG-1000 BTU/ft3 / LP-2500 BTU/ft3) At 100% of Power Rating: m3/hr (ft3/hr) At 75% of Power Rating: m3/hr (ft3/hr) At 50% of Power Rating: m3/hr (ft3/hr) // NG 13.9 (489) 10.4 (368) 7.3 (256) LPG 6.1 (216) 4.6 (163) 3.2 (113) Cooling - Radiator System Ambient Capacity of Radiator: °C (°F) Max. Restriction of Cooling Air: Intake and Discharge Side of Rad.: kPa (in. H20) Water Pump Capacity: L/min (gpm) Heat Rejection to Coolant: kW (BTUM) Heat Radiated to Ambient: kW (BTUM) Fan Power: kW (hp) NG and LPG 50 (122) 0.12 (0.5) 117.3 (31) 39 (2,220) 16.5 (938) 3.4 (4.5) Liquid Capacity (Lubrication) Total Oil System: L (gal) Engine Jacket Water Capacity: L (gal) System Coolant Capacity: L (gal) // // // Air Requirements Aspirating: *m3/min (SCFM) Air Flow Required for Rad. Cooled Unit: *m3/min (SCFM) Remote Cooled Applications; Air Flow Required for Dissipation of Radiated Generator Set Heat For a Max. of 25 °F Rise: *m3/min (SCFM) NG and LPG 3.9 (136.5) 211.4 (7,464) 59.9 (2,114) * Air density = 1.184 kg/m3 (0.0739 lbm/ft3) 3/4” NPT 178–279 (7–11) Fuel Inlet - Liquid Supply Fuel Supply Connection Size #6 (3/8”) Female SAE 45° Flare Max. Fuel Supply Pressure: kPa (PSI) 2,150 (312) // Exhaust System Gas Temp. (Stack): °C (°F) Gas Volume at Stack Temp: m3/min (CFM) Max. Allowable Back Pressure: kPa (in. H20) NG and LPG 704.4 (1,300) 12.5 (440.8) 10 (40) 4 / // / MTU 6V0072 GS40 (40 kWe) - Standby WEIGHTS AND DIMENSIONS Drawing above for illustration purposes only, based on standard open power 480 volt generator set. Lengths may vary with other voltages. Do not use for installation design. See website for unit specific template drawings. System Open Power Unit (OPU) Dimensions (L x W x H) 1,981 x 864 x 1,229 mm (78 x 34 x 48.38 in) Weight (dry) 572 kg (1,260 lb) SOUND DATA Unit Type Level 0: Open Power Unit dB(A) WPE - No Sound Attenuation dB(A) CQE dB(A) Standby Full Load C/F C/F C/F Sound data is provided at 7 m (23 ft). Generator set tested in accordance with ISO 8528-10 and with infinite exhaust. EMISSIONS DATA Fuel Type Natural Gas Liquid Propane THC + NOx 5.24 6.09 RATING DEFINITIONS AND CONDITIONS CO 16.38 23.89 All units are in g/hp-hr and are EPA weighted cycle values. Emission levels of the engine may vary with ambient temperature, barometric pressure, humidity, fuel type and quality, installation parameters, measuring instrumentation, etc. The data was obtained in compliance with US EPA regulations. C/F = Consult Factory/MTU Onsite Energy Distributor N/A = Not Available MTU Onsite Energy A Rolls-Royce Power Systems Brand www.mtuonsiteenergy.com Standby ratings apply to installations served by a reliable utility source. The standby rating is applicable to varying loads for the duration of a power outage. No overload capability for this rating. Ratings are in accordance with ISO 3046-1, BS 5514, and AS 2789. Average load factor: ≤ 85%. // Deration Factor: Altitude: Consult your local MTU Onsite Energy Power Generation Distributor for altitude derations. Temperature: Consult your local MTU Onsite Energy Power Generation Distributor for temperature derations. // © MTU Onsite Energy. Subject to alteration due to technological advances. OE 23 683 (72 3E) 2016-01 Weights and dimensions are based on open power units and are estimates only. Consult the factory for accurate weights and dimensions for your specific generator set.