CLARE CPC1030N 4-pin sop optomosâ® relay Datasheet

CPC1030N
4-Pin SOP OptoMOS® Relay
Parameter
Blocking Voltage
Load Current
Max On-resistance
Rating
350
120
30
Description
The CPC1030N is a miniature single-pole, normally
open (1-Form-A) solid state relay in a 4-Pin SOP
package that employs optically coupled MOSFET
technology to provide 1500Vrms of input/output
isolation. The efficient MOSFET switches and
photovoltaic die use Clare’s patented OptoMOS
architecture. The optically coupled output is controlled
by a highly efficient GaAIAs infrared LED.
Units
VP
mA
Ω
Features
• Small 4-Pin SOP Package
• Low Drive Power Requirements (TTL/CMOS
Compatible)
• No Moving Parts
• High Reliability
• Arc-Free With No Snubbing Circuits
• 1500Vrms Input/Output Isolation
• No EMI/RFI Generation
• Machine Insertable, Wave Solderable
• Tape & Reel Version Available
The CPC1030N uses Clare’s state of the art
double-molded vertical construction packaging to
produce one of the world’s smallest relays. The
CPC1030N offers board space savings of at least
20% over the competitor’s larger 4-Pin SOP relay.
Approvals
• UL Recognized Component: File # E76270
• EN/IEC 60950-1 Compliant
• CSA Certified Component: Certificate # 1172007
Applications
• Telecommunications
• Telecom Switching
• Tip/Ring Circuits
• Modem Switching (Laptop, Notebook, Pocket
Size)
• Hook Switch
• Dial Pulsing
• Ground Start
• Ringing Injection
• Instrumentation
• Multiplexers
• Data Acquisition
• Electronic Switching
• I/O Subsystems
• Meters (Watt-Hour, Water, Gas)
• Medical Equipment—Patient/Equipment Isolation
• Security
• Aerospace
• Industrial Controls
Ordering Information
Part #
CPC1030N
CPC1030NTR
Description
4-Pin SOP (100/tube)
4-Pin SOP (2000/reel)
Pin Configuration
+ Control
– Control
1
4
Load
3
2
Load
Switching Characteristics of
Normally Open (Form A) Devices
Control
ILOAD
+
90%
10%+
tOFF
tON
Pb
RoHS
2002/95/EC
DS-CPC1030N-R12
e3
www.clare.com
1
CPC1030N
Absolute Maximum Ratings (@ 25˚C)
Parameter
Blocking Voltage
Reverse Input Voltage
Input Control Current
Peak (10ms)
Input Power Dissipation
Total Power Dissipation 1
Isolation voltage, Input to Output
Operational Temperature
Storage Temperature
1
Ratings
350
5
50
1
70
400
1500
-40 to +85
-40 to +125
Units
VP
V
mA
A
mW
mW
Vrms
°C
°C
Absolute Maximum Ratings are stress ratings. Stresses in
excess of these ratings can cause permanent damage to
the device. Functional operation of the device at conditions
beyond those indicated in the operational sections of this
data sheet is not implied.
Derate Linearly 3.33 mw / ºC
Electrical Characteristics
Parameter
Output Characteristics @ 25°C
Load Current
Continuous 1
Peak
On-Resistance 2
Off-State Leakage Current
Switching Speeds
Turn-On
Turn-Off
Output Capacitance
Input Characteristics @ 25°C
Input Control Current 3
Input Dropout Current
Input Voltage Drop
Reverse Input Current
Input/Output Characteristics @ 25°C
Capacitance Input to Output
1
2
3
2
Conditions
Symbol
Min
Typ
Max
t=10ms
IL=120mA
VL=350V
IL
ILPK
RON
ILEAK
-
25
-
120
350
30
1
50V; f=1MHz
tON
tOFF
COUT
-
25
2
1
-
IL=120mA
IF=5mA
VR=5V
IF
IF
VF
IR
0.3
0.9
-
0.85
0.6
1.2
-
2
1.4
10
mA
mA
V
µA
-
-
-
1
-
pF
IF=5mA, VL=10V
Units
mA
Ω
µA
ms
pF
Load current derates linearly from 120mA @ 25oC to 80mA @85oC.
Measurement taken within 1 second of on time.
For applications requiring high temperature operation (greater than 60oC) an LED drive current of 4mA is recommended.
www.clare.com
R12
CPC1030N
PERFORMANCE DATA*
Typical LED Forward Voltage Drop
(N=50, IF=5mA, TA=25ºC)
35
35
25
20
15
10
25
20
15
10
5
5
0
0
Typical IF for Switch Operation
(N=50, IL=120mA, TA=25ºC)
25
Device Count (N)
15
10
5
24
24.5
25
25.5
On-Resistance (Ω)
0.50
0.55
0.60
0.65
0.70
15
10
5
15
10
5
0.50
0.55 0.60 0.65 0.70
LED Current (mA)
0.23
0.24
0.25
0.26
0.016
160
0.014
140
120
100
I F =10mA
80
60
I F =5mA
40
-20
0
20
40
60
80
Temperature (ºC)
Turn-Off (ms)
395
Turn-On (ms)
385
380
375
370
365
-40
-20
0
20
40
60
Temperature (ºC)
80
100
0.70 0.80 0.90
Turn-On (ms)
1.00
1.10
Typical Leakage vs. Temperature
Measured Across Pins 3 & 4
(VL=350V)
0.012
0.010
0.008
0.006
0.004
100
0
-40
120
5.0
4.5
4.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0
I F = 5mA
I F = 10mA
-40
-20
0
20
40
60
Temperature (ºC)
-20
0
20
40
60
80
100
Temperature (ºC)
Typical Turn-On vs. Temperature
(IL=80mA)
Typical Blocking Voltage
vs. Temperature
400
0.60
0.002
-40
0.27
390
5
180
Turn-Off (ms)
0.22
10
0.50
0
0.21
15
0.75
20
0
400
20
Typical Load Current vs. Temperature
Load Current (mA)
Device Count (N)
20
380 385 390 395
Blocking Voltage (VP)
0
0.45
LED Current (mA)
25
375
Typical Turn-On Time
(N=50, IF=5mA, IL=120mA, TA=25ºC)
25
20
0.75
Typical Turn-Off Time
(N=50, IF=5mA, IL=120mA, TA=25ºC)
10
370
Leakage (µA)
0.45
15
26.5
0
0
Blocking Voltage (VP)
26
Typical IF for Switch Dropout
(N=50, IL=120mA, TA=25ºC)
25
20
20
0
23.5
1.19
1.21
1.23
1.25
LED Forward Voltage Drop (V)
25
5
Device Count (N)
1.17
Typical Blocking Voltage Distribution
(N=50, TA=25ºC)
30
Device Count (N)
Device Count (N)
Device Count (N)
35
30
30
Device Count (N)
Typical On-Resistance Distribution
(N=50, IF=2mA, IL=120mA, TA=25ºC)
80
100
Typical Turn-Off vs. Temperature
(IL=80mA)
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
I F = 10mA
I F = 5mA
-40
-20
0
20
40
60
Temperature (ºC)
80
100
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please
contact our application department.
R12
www.clare.com
3
CPC1030N
PERFORMANCE DATA*
Typical Turn-On vs. LED Forward Current
(IL=120mA, TA=25ºC)
1.6
1.4
I F = 50mA
I F = 30mA
I F = 20mA
I F = 10mA
I F = 5mA
1.2
1.0
0.8
-40
0
20
40
60
80
Temperature (ºC)
100
120
5
10
15
20
25
30
35
40
45
30
20
-40
150
-20
0
20
40
60
Temperature (ºC)
80
0
Typical Load Current vs. Load Voltage
(IF=5mA, TA=25ºC)
Load Current (A)
0
-50
-100
-150
-3
-2
-1
0
1
Load Voltage (V)
2
3
10
15
20
25
30
35
40
45
Typical IF for Switch Dropout
vs. Temperature
(IL=80mA)
3.0
50
2.5
1.5
1.0
2.0
1.5
1.0
0.5
0
-20
0
20
40
60
Temperature (ºC)
80
100
-40
-20
0
20
40
60
Temperature (ºC)
80
100
Energy Rating Curve
100
50
5
Typical IF for Switch Operation
vs. Temperature
(IL=80mA)
2.0
-40
100
0.4
LED Forward Current (mA)
0
0
0.6
LED Forward Current (mA)
0.5
10
0.8
0
50
2.5
40
1.0
0.2
3.0
LED Current (mA)
On-Resistance (Ω)
1.2
0
Typical On-Resistance vs. Temperature
(IF=10mA, IL=80mA)
50
Load Current (mA)
1.4
LED Current (mA)
60
-20
2.0
1.8
1.6
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0
Typical Turn-Off vs. LED Forward Current
(IL=120mA, TA=25ºC)
Turn-Off (ms)
1.8
Turn-On (ms)
LED Forward Voltage Drop (V)
Typical LED Forward Voltage Drop
vs. Temperature
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
10μs 100μs 1ms 10ms 100ms
Time
1s
10s 100s
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please
contact our application department.
4
www.clare.com
R12
CPC1030N
MANUFACTURING INFORMATION
Moisture Sensitivity
Clare has characterized the moisture reflow sensitivity
of this package, and has determined that this
component must be handled in accordance with
IPC/JEDEC standard J-STD-033 moisture sensitivity
level (MSL), level 3 classification.
Pb
e3
RoHS
2002/95/EC
Soldering Reflow Profile
For proper assembly, the component must be
processed in accordance with the current revision
of IPC/JEDEC standard J-STD-020. Failure to
follow the recommended guidelines may cause
permanent damage to the device resulting in impaired
performance and/or a reduced lifetime expectancy.
Washing
Clare does not recommend ultrasonic cleaning or the
use of chlorinated solvents.
MECHANICAL DIMENSIONS
4-Pin SOP Package
Recommended PCB Land Pattern
4.089 ± 0.203
(0.161 ± 0.008)
0.200 ± 0.025
(0.008 ± 0.001)
6.096 ± 0.102
(0.240 ± 0.004)
3.810 ± 0.076
(0.150 ± 0.003)
0.60
(0.0217)
0.432 ± 0.127
(0.017 ± 0.005)
1.02 ± 0.025
(0.040 ± 0.001)
Pin 1
2.54 Typ
(0.100 Typ)
5.60
(0.2205)
1.30
(0.0512)
2.54
(0.10)
2.184 Max
(0.086 Max)
0.0254 - 0.102
(0.001 - 0.004)
Dimensions
mm
(inches)
0.381 TYP.
(0.015 TYP.)
Tape and Reel Packaging for 4-Pin SOP Package
330.2 Dia
(13.00 Dia)
Top Cover
Tape Thickness
0.102 Max
(0.004 Max)
W=12.00 Max
(0.472 Max)
Pin 1
B0=4.70
(0.185)
K0=2.70
(0.106)
K1=2.30
(0.091)
P=8.00
(0.315)
A0=6.50
(0.256)
User Direction of Feed
Embossed
Carrier
Embossment
Dimensions
mm
(inches)
NOTE: Tape dimensions not shown comply with JEDEC Standard EIA-481-2
For additional information please visit our website at: www.clare.com
Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications
and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare’s Standard Terms and Conditions of
Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability,
fitness for a particular purpose, or infringement of any intellectual property right.
The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other
applications intended to support or sustain life, or where malfunction of Clare’s product may result in direct physical harm, injury, or death to a person or severe property or environmental
damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice.
5
Specification: DS-CPC1030N-R12
©Copyright 2009, Clare, Inc.
OptoMOS® is a registered trademark of Clare, Inc.
All rights reserved. Printed in USA.
3/9/09
Similar pages