SPECIFICATION CONTROL DRAWING Nom Size (AWG) Prod. Rev Product Name D-609-06 B 26 - 20 D-609-07 B 20 - 16 D-609-08 B 16 -12 øA 1.27 (0.050) 1.13 (0.045) 1.75 (0.069) 1.62 (0.064) 2.59 (0.102) 2.46 (0.097) Product Dimensions C ±0.25 D ±0.25 øB (C ±0.010) (D ±0.010) 2.03 (0.080) 12.7 5.97 1.90 (0.075) (0.500) (0.235) 2.69 (0.106) 14.61 6.86 2.56 (0.101) (0.575) (0.270) 3.89 (0.153) 14.61 6.86 3.73 (0.147) (0.575) (0.270) E max 0.381 (0.015) 0.51 (0.020) 1.27 (0.050) Max Weight Lbs./mpc Color Code Useable CMA 0.61 Red 300 - 1510 1.17 Blue 779 - 2680 2.30 Yellow 1900 - 6755 MATERIAL 1. CRIMP SPLICER: Base Metal - Copper Alloy 101 or 102 per ASTM B 75. Plating: Tin per MIL-T-10727, Type I. Color Code Stripe: per table of dimensions APPLICATION 1. Parts shall be of seamless tubular construction. 2. Acceptance sampling shall be in accordance with Paragraph 4 of MIL-S-81824. 3. Packing and packaging shall be in accordance with Section 5, Level C, of MIL-S-81824. 4. Use Tyco Electronics Crimp Tool AD-1377 or equivalent. Tyco Electronics Corporation 300 Constitution Drive, Menlo Park, CA. 94025, U.S.A. Unless otherwise specified dimensions are in millimeters. Inches dimensions are shown in brackets. TOLERANCES: 0.00 N/A 0.0 N/A 0 N/A ANGLES: N/A ROUGHNESS IN MICRON DRAWN BY: M. FORONDA CAGE CODE: 06090 TITLE: COLOR CODED CRIMP SPLICER, IN-LINE, TIN PLATED Raychem DOCUMENT NO.: D-609-06/-07/-08 Tyco Electronics reserves the right to amend this drawing at any time. Users should evaluate the suitability of the product for their application. REPLACES: DCR NUMBER: D010059 D020545 If this document is printed it becomes uncontrolled. Check for the latest revision. © 2004 Tyco Electronics Corporation. All rights reserved PROD. REV.: SEE TABLE SCALE: None DOC. ISSUE: DATE: 2-Dec-02 4 SIZE: A SHEET: 1 of 1