Online data sheet GLL170T-B434 GLL170 FIBER-OPTIC SENSORS AND FIBERS GLL170T-B434 | GLL170 FIBER-OPTIC SENSORS AND FIBERS A B C D E F Ordering information Type Part no. GLL170T-B434 6063341 Other models and accessories www.sick.com/GLL170 Illustration may differ Detailed technical data H I J K L M N O P Q R S T Features Device type Stand-alone Sensor/detection principle Fiber-optic photoelectric sensor Dimensions (W x H x D) 10 mm x 31.7 mm x 72.5 mm Housing design (light emission) Rectangular Sensing range max. 0 mm ... 400 mm, Proximity system 1) 2) 0 mm ... 1,320 mm, Through-beam system 3) Sensing range 0 mm ... 350 mm, Proximity system 1) 2) 0 mm ... 1,100 mm, Through-beam system 3) Type of light Visible red light Light source LED 4) Wave length 632 nm Adjustment Teach-in button Cable Plus/minus button Time type On delay Off delay One shot Without time delay Delay time Programmable, 0 ms, 9,999 ms Indication Display Display Status LEDs, 4-digit digital display, display selectable between percentage value, absolute digit value and bar display / display of parameters 1) 2) 3) 4) 2 Object with 90 % reflectance (referred to standard white, DIN 5033). LL3-DK06. LL3-TB02. Average service life: 100,000 h at TU = +25 °C. PHOTOELECTRIC SENSORS | SICK Online data sheet | 2017-05-29 14:15:05 Subject to change without notice GLL170T-B434 | GLL170 FIBER-OPTIC SENSORS AND FIBERS Mechanics/electronics Supply voltage 10 V DC ... 30 V DC 1) Ripple ≤ 10 % 2) Power consumption ≤ 40 mA 3) Output type PNP, NPN, selectable via menu Number of switching outputs 1 Switching mode Light/dark switching Switching mode selector Selectable via menu Output current Imax. ≤ 100 mA Response time ≤ 250 µs 4) ≤ 50 µs, selectable via menu 4) Switching frequency 2 kHz 10 kHz Input Teach-in input Connection type Connector M8, 4-pin Cable material PVC Conductor cross-section 0.2 mm² Cable diameter 3.8 mm Circuit protection A 5) B 6) C 7) D 8) Protection class III Weight 22 g Housing material PC/POM Tightening torque, max. 0.5 Nm Enclosure rating IP66 9) Ambient operating temperature –25 °C ... +55 °C Ambient storage temperature –40 °C ... +70 °C UL File No. - 1) 2) 3) 4) 5) 6) 7) 8) 9) Limit values. May not exceed or fall below Uv tolerances. Without load. Signal transit time with resistive load. A = VS connections reverse-polarity protected. B = inputs and output reverse-polarity protected. C = interference suppression. D = outputs overcurrent and short-circuit protected. With correctly attached fibre-optic cable LL3. Classifications ECl@ss 5.0 27270905 ECl@ss 5.1.4 27270905 ECl@ss 6.0 27270905 ECl@ss 6.2 27270905 2017-05-29 14:15:05 | Online data sheet Subject to change without notice PHOTOELECTRIC SENSORS | SICK 3 GLL170T-B434 | GLL170 FIBER-OPTIC SENSORS AND FIBERS A B C D E F H I J K L M N O P Q R S T ECl@ss 7.0 27270905 ECl@ss 8.0 27270905 ECl@ss 8.1 27270905 ECl@ss 9.0 27270905 ETIM 5.0 EC002651 ETIM 6.0 EC002651 UNSPSC 16.0901 39121528 Adjustments possible GLL170T 1 7 ① ② ③ ④ ⑤ ⑥ ⑦ 6 2 3 4 5 LED indicator orange, lights up when switching output is active Plus/minus button SET button Teach-in button Display LED indicator green: Supply voltage active Locking the fiber-optic cables Connection diagram Cd-092 brn 1 wht 2 blu 3 blk 4 4 + (L+) Teach - (M) Q PHOTOELECTRIC SENSORS | SICK Online data sheet | 2017-05-29 14:15:05 Subject to change without notice GLL170T-B434 | GLL170 FIBER-OPTIC SENSORS AND FIBERS Dimensional drawing (Dimensions in mm (inch)) 72.5 (2.85) 10 31.7 (1.25) 8 (0.31) 9.4 18.8 (0.74) ) 3.1 (0.12) 13 3.2 (0. 36.6 (1.44) (0 . (0.37) 2.3 9.9 09 ) ) 3.2 (0.13) 1.6 06 (0. (0.39) (0.39) 55.5 (2.19) 5.9 (0.23) 8 (0.31) 1 2 ① ② ③ ④ (0.37) 4 9.4 33.1 (1.3) 3 3.8 (0.15) ~160° Mounting holes Protective hood (optional), opens approx. 160° Connector M8 Cable Recommended accessories Other models and accessories www.sick.com/GLL170 Brief description Type Part no. BF-GLL170 5336263 BEF-WLL170 5306574 Device protection (mechanical) Protective Hood for GLL170, opens approx. 160°, PC Mounting brackets and plates Mounting bracket, steel, zinc coated, without mounting hardware 2017-05-29 14:15:05 | Online data sheet Subject to change without notice PHOTOELECTRIC SENSORS | SICK 5 GLL170T-B434 | GLL170 FIBER-OPTIC SENSORS AND FIBERS A B C D E F H I J K L M N O P Q R S T Brief description Type Part no. FC 5304141 Head A: female connector, M8, 4-pin, straight Head B: cable Cable: PVC, unshielded, 2 m DOL-0804-G02M 6009870 Head A: female connector, M8, 4-pin, straight Head B: cable Cable: PVC, unshielded, 5 m DOL-0804-G05M 6009872 Head A: female connector, M8, 4-pin, straight Head B: cable Cable: PVC, unshielded, 10 m DOL-0804-G10M 6010754 Head A: female connector, M8, 4-pin, angled Head B: cable Cable: PVC, unshielded, 2 m DOL-0804-W02M 6009871 Head A: female connector, M8, 4-pin, angled Head B: cable Cable: PVC, unshielded, 5 m DOL-0804-W05M 6009873 Head A: female connector, M8, 4-pin, angled Head B: cable Cable: PVC, unshielded, 10 m DOL-0804-W10M 6010755 Head A: female connector, M8, 4-pin, straight Head B: Cable: unshielded DOS-0804-G 6009974 Head A: female connector, M8, 4-pin, angled Head B: Cable: unshielded DOS-0804-W 6009975 Head A: male connector, M8, 4-pin, straight Head B: Cable: unshielded STE-0804-G 6037323 Other mounting accessories Cutter for fibers, supplied with LL3 Plug connectors and cables 6 PHOTOELECTRIC SENSORS | SICK Online data sheet | 2017-05-29 14:15:05 Subject to change without notice Online data sheet SICK at a glance SICK is one of the leading manufacturers of intelligent sensors and sensor solutions for industrial applications. A unique range of products and services creates the perfect basis for controlling processes securely and efficiently, protecting individuals from accidents and preventing damage to the environment. We have extensive experience in a wide range of industries and understand their processes and requirements. With intelligent sensors, we can deliver exactly what our customers need. In application centers in Europe, Asia and North America, system solutions are tested and optimized in accordance with customer specifications. All this makes us a reliable supplier and development partner. Comprehensive services complete our offering: SICK LifeTime Services provide support throughout the machine life cycle and ensure safety and productivity. For us, that is “Sensor Intelligence.” Worldwide presence: Contacts and other locations – www.sick.com SICK AG | Waldkirch | Germany | www.sick.com