Interface Connectors for Factory Automation Network HR31 Series Complies with Device Net requirements Comparison of plug heights (actual size) 10.2 ●Hirose HR31 15 ●Other manufacturer’s product ■ Features 1. Device-Net Compliant Conforms to requirements of Factory Automation Network Device-Net standards. Hirose products are distinct from products of made others, as described below. Feature Made by others Hirose HR31 Reduced number of termination operations Crimped to commercially available cap connectors, inserted into housing and fastened by screw. Crimped and connected to terminal then fastened simply by inserting into housing. High density mounting Plug height : 15 mm Plug height is 10.2 mm, allowing use of less space when mounting several connectors Prevention of connection errors Contact positions not identified. Permanently identified contact positions Number of required operations to secure receptacle assembly to the board Connectors are attached by screws from the opposite side. No need for screws, built-in locking pin secures connector to the board 2 Locking features Total space occupied by mated assemblies The connectors can be supplied with either of the following locking features: -Screw lock, using attached screws. -Snap lock, using built-in feature with a definite click-sensation. With screw lock 12 27 3 4 27.4 10.2 27 3 4 20 5 20 5 10.2 When fully inserted, the plug contacts are fully protected by the walls of the insulator body eliminating a risk of accidental damage. 35.5 4. Prevention of deformation of the contacts 12 Without screw lock 1 2 Use crimp tools conforming to JIS C 9711 standards. Terminated contacts can be removed using 1 mm dia. steel pin. and re-inserted. 1 2 3. Commercially available tools may be used ■ Applications Power units and communications units of factory automation related devices 2004.7 1 ■ Product Specifications 12A (2.5mm2 wire) 10A (1.5mm2 wire) 250V AC, 350V DC Current rating Rating Voltage rating Item Operating temperature range -40ç to +100ç Storage temperature range -40ç to +85ç (Note 2) Specification Conditions 1.Contact resistance 5 m ohms max. 1A DC 2.Insulation resistance 1000 M ohms min. 500 V DC 3.Withstanding voltage No flashover or insulation breakdown 2000V AC/one minute 4.Impulse withstanding voltage No flashover or insulation breakdown Standard waveform of 4KV, positive/negative, 3 times each 5.Vibration No electrical discontinuity of 10 µs or more Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 5 min. in each of the 3 directions, 10 cycles each 6.Durability (insertion/ withdrawal) Contact resistance: 10 m ohms max. 100 cycles (1000 cycles for gold plated contacts) 7.Temperature cycle Insulation resistance: 1000 M ohms min. 8.Humidity Insulation resistance: 10 M ohms min. (Humidity state) 100 M ohms min. (Dry state) Temperature: -40ç / Room temperature to +100ç / Room temperature Time: 30 / 10 to 15 / 30 / 10 to 15 (Minutes) 5 cycles 96 hours at temperature of 40ç and humidity of 90% to 95% ■ Materials Part Plug Crimp contact Material Finish Remarks Insulator PBT Color: Black or Green Screw Steel Nickel plating Socket contact Contact area: phosphor bronze Termination area: copper Contact area: tin plating Termination area: tin plating Available with gold plating on contact area Insulator PBT Color: Black or Green UL94V-0 Male contact Brass Contact area: tin plating Termination are: tin plating Available with gold plating on contact area Nut Steel Nickel plating Board retention pin Phosphor bronze Tin plating Receptacle UL94V-0 ■ Ordering information ●Connector HR31 - 5.08 P A - 5 S C (01) 1 1 Series name 2 Contact pitch 3 Connector type 4 Screw lock type 5 No. of contacts 2 3 4 5 6 7 8 6 Contact type S: Female contact P: Male contact 7 Terminal type C: Crimping DL: Right angle through hole type D: Straight through hole type 8 Color, plating, board retention pin type HR31 5.08mm P: Plug R: Receptacle Blank: With screw A: Without screw 5 ●Crimp contact HR31 - SC - 1 1 3 (01) 9 9 10 11 12 2 10 11 12 Series name HR31 Contact type SC: female contact Contact packaging type 1: loose contact Conductor cross area 1: 1.04 to 2.63mm2 2: 0.25 to 1.65mm2 13 14 13 Plating type 3: Tin plating 1: Gold plating 14 Suffix ■ Plug (with screw lock) 27 8.3 28.3 1 2 3 4 5 10.2 25.4 35.5 HR31-5.08P-5SC CL No. Color Weight 131-0002-2-71 HR31-5.08P-5SC(72) 131-0002-2-72 Black 8g Plug (without screw lock) Green 27 2 3 4 5 8.3 28.3 1 Part No. HR31-5.08P-5SC(71) 10.2 25.4 HR31-5.08PA-5SC CL No. Part No. HR31-5.08PA-5SC 131-0009-1 HR31-5.08PA-5SC(01) 131-0009-1-01 ■ Crimp contact Color Weight Black 6g B Green B-B 2.35 ØA 23 B Part No. CL No. ØA HR31-SC-113(71) 131-0006-3-71 4 131-0007-6-72 3.3 131-0004-8-71 4 131-0005-0-72 3.3 HR31-SC-123(72) HR31-SC-111(71) HR31-SC-121(72) Weight Contact plating Tin 1g Gold Applicable conductor cross area (Note 2) 1.04 to 2.63mm2 0.2 to 1.65mm2 1.04 to 2.63mm2 0.2 to 1.65mm2 Note 1: Bag packaging (100 pieces/bag) Note 2: For a multi-strand conductors 3 ■ Receptacle (Right angle through hole type with screw lock) Contact plating 8.6 35.5 1 2 3 4 12 5 3.3 3 7.5 10 HR31-5.08R-5PDL Part No. CL No. HR31-5.08R-5PDL(71) Weight Color Contact plating 131-0001-0-71 Tin HR31-5.08R-5PDL(72) 131-0001-0-72 Gold HR31-5.08R-5PDL(73) 131-0001-0-73 HR31-5.08R-5PDL(74) 131-0001-0-74 HR31-5.08R-5PDL(75) 131-0001-0-75 HR31-5.08R-5PDL(76) 131-0001-0-76 Black Board retention pin With Tin 4g Without Gold Green With Without Receptacle (Right angle through hole type without screw lock) Contact plating 27.4 2 3 4 5 3 8.6 1 12 10 3.3 HR31-5.08RA-5PDL 10.25 Part No. CL No. HR31-5.08RA-5PDL(71) 131-0008-9-71 Weight Color Contact plating Tin HR31-5.08RA-5PDL(72) 131-0008-9-72 Gold HR31-5.08RA-5PDL(73) 131-0008-9-73 HR31-5.08RA-5PDL(74) 131-0008-9-74 HR31-5.08RA-5PDL(75) 131-0008-9-75 HR31-5.08RA-5PDL(76) 131-0008-9-76 Black Board retention pin With Tin 2g Without Gold Green With Without BPCB mounting pattern le) h ho roug (Th te) h (No .3 +00.1 (T 2 2-Ø 5.08±0.05 5.08±0.05 10.16±0.05 10.16±0.05 15.24±0.05 ole) hh roug (N ) ote .3 Ø2 2- .1 +0 0 (T u hro gh ho .1 +0 0 le) ugh e) hol ro (Th 6 Ø1. 5- 10±0.05 +0.1 0 10 ±0.05 1.6 5-Ø ● Without screw lock 10.25±0.05 7.5±0.05 ● With screw lock 5.08±0.05 5.08±0.05 10.16±0.05 10.16±0.05 15.24±0.05 Connector mounting side (Board thickness =1.6) 12.6±0.05 12.6±0.05 Connector mounting side (Board thickness =1.6) Note: Dia. 2.3 through hole is not required on the board when using connectors without the retention pin. 4 ■ Receptacle (Straight through hole type with screw lock) 35.5 2 3 4 5 3.8 8.6 1 3 4.3 12 Connector mounting side B HR31-5.08R-5PD Part No. CL No. Weight Color Contact plating HR31-5.08R-5PD(71) 131-0003-5-71 Tin HR31-5.08R-5PD(72) 131-0003-5-72 Gold HR31-5.08R-5PD(73) 131-0003-5-73 HR31-5.08R-5PD(74) 131-0003-5-74 HR31-5.08R-5PD(75) 131-0003-5-75 HR31-5.08R-5PD(76) 131-0003-5-76 Black Board retention pin With Tin 4g Without Gold Green With Without Receptacle (Straight through hole type without screw lock) 27.4 8.6 1 2 3 4 5 3 Connector mounting side B HR31-5.08RA-5PD Part No. CL No. Weight Color 12 4.3 Contact plating HR31-5.08RA-5PD(71) 131-0016-7-71 Tin HR31-5.08RA-5PD(72) 131-0016-7-72 Gold HR31-5.08RA-5PD(73) 131-0016-7-73 HR31-5.08RA-5PD(74) 131-0016-7-74 HR31-5.08RA-5PD(75) 131-0016-7-75 HR31-5.08RA-5PD(76) 131-0016-7-76 Black Board retention pin With Tin 2g Without Gold Green With Without BPCB mounting pattern ● With screw lock ● Without screw lock ho hole hr te) (No 3+00.1 (T Ø2. 2 5.08±0.05 5.08±0.05 10.16±0.05 10.16±0.05 15.24±0.05 ) h oug 15.24±0.05 5±0.05 5- 6 Ø1. gh rou (Th 3.8±0.05 3.8±0.05 .1 +0 0 le) (N ) .1 ote .3+00 Ø2 2- (Th g rou hh ole .1 +00 (T u hro gh ho le) .6 Ø1 5- 5.08±0.05 5.08±0.05 10.16±0.05 10.16±0.05 12.6±0.05 12.6±0.05 Connector mounting side B (Board thickness =1.6) ) Connector mounting side B (Board thickness =1.6) Note: Dia. 2.3 through hole is not required on the board when using connectors without the retention pin. 5 ■ Tools Type Part No. CL No. Manual crimp tool HR31-TC-01 150-0217-7 Contact removal pin HR31-SC-TP 150-0215-1 Manual crimp tool Contact removal pin ● Tools application procedures 1. Manual contact crimp tool The tool will terminate all specified crimp contacts. Placement of correct contact in corresponding crimp position on the tool is critical. The positions are clearly indicated on the tool as (2) and (1.25). The exposed conductor strip length is 5mm. Crimp position indicator Applicable crimp contact 2 HR31-SC-113 or HR31-SC-111 1.25 HR31-SC-123 or HR31-SC-121 2 1.25 Crimp position indicator 2. Contact removal pin Contact removal pin provides easy method of contact removal from plug assembly. 1) Fully insert the long end of the contact removal pin into the opening in the insulator. 2) Move the pin forward, in the direction of the mating face. This will cause the terminated contact to move in opposite direction. 3) Pull out the wire with the attached crimped contact. Molded-in lance Molded-in lance Wire Wire Pull-out Insertion direction Contact removal pin 6 Contact removal pin B Usage Precautions 1. To prevent damage, align receptacle with the panel and board in such a way that it is not subject to excess loads. 1.1 Recommended mounting panel dimensions (right angle through hole type) Panel Part No. A HR31-5.08R-5PDL 36 +0.2 +0 HR31-5.08RA-5PDL 27.9 +0.2 +0 A 5 min. +0.2 16.6 ±0.1 3.2 0 +0.2 +0.2 11 0 7.8 +0.2 0 2 0 Board 1.2 Recommended mounting panel dimensions (straight through hole type) Panel 5 min. 3.2 B Part No. B 16.6 ±0.1 HR31-5.08R-5PD 36 +0.2 +0 HR31-5.08RA-5PD 27.9 +0.2 +0 11+0.2 0 0.2+0.2 0 7.8 +0.2 0 2 +0.2 0 2. Insert the crimp contact into the plug in the direction shown below. Crimp contact Wire 3. Use a number 0 cross drive bit to tighten the screw lock’s screw. 4. Assure that the circuit’s power is off when mating and un-mating connectors. 7 NOTES : USA: HIROSE ELECTRIC U.S.A., INC. 2688 Westhills Court, Simi Valley, CA 93065-6235 Phone : 1 805 522 7958 Fax : 1 805 522 3217 http://www.hiroseusa.com THE NETHERLANDS: HIROSE ELECTRIC EUROPE B.V. Beechavenue 46.1119PV Schiphol-Rijk Phone : 31 20 6557460 Fax : 31 20 6557469 http://www.hiroseeurope.com UNITED KINGDOM: KOREA: HIROSE ELECTRIC UK LTD. HIROSE KOREA CO., LTD. Crownhill Business Centre 22 Vincent Avenue (#2NA311,Shihwa Industrial Complex), Crownhill, Milton Keynes MK8 OAB 1261-10, Jeoungwhang-Dong, Shihung-City, Kyunggi-Do Phone : 44 1908 305400 Phone : 82 31 496 7000,7124 Fax : 44 1908 305401 Fax : 82 31 496 7100 http://www.hirose.co.uk http://www.hirose.co.kr CHINA: HIROSE ELECTRIC TRADING(SHANGHAI) CO., LTD. 3705,Bund Center,222 Yan An Road(E),Shanghai 20002 Phone : 86 21 6335 2538 Fax : 86 21 6335 0767 HONG KONG: HIROSE ELECTRIC CO., LTD. Unit 506, Energy Plaza. 92 Granville Road, Tsim Sha Tsui East, Kowloon Phone : 852 2803 5338 Fax : 852 2591 6560 SINGAPORE: HIROSE ELECTRIC CO., LTD. 10 Anson Road #34-13 International Plaza 079903 Phone : 65 6324 6113 Fax : 65 6324 6123 ® 8 GERMANY: HIROSE ELECTRIC GmbH Zeppelinstrasse 42 D-73760 Ostfildern Kemnat Phone : 49 711 4560021 Fax : 49 711 4560729 http://www.hirose.de TAIWAN: HIROSE ELECTRIC TAIWAN CO., LTD. No.28 Lane 247 Sec. 2 Yen Ping N,Rd.Taipei Phone : 886 2 2557 7351,7352 Fax : 886 2 2552 9851 5-23,OSAKI 5-CHOME,SHINAGAWA-KU,TOKYO 141-8587,JAPAN PHONE: 81-3-3491-9741, FAX: 81-3-3493-2933 http://www.hirose.com http://www.hirose-connectors.com The contents of this catalog are current as of date of publication. Contents are subject to change without notice for the purpose of improvements.