Delta DVME28/HB-XXX High reliability hybrid emi filter Datasheet

DVME28 Series
HIGH RELIABILITY HYBRID
EMI FILTERS
DESCRIPTION
FEATURES
The DVME series of hybrid EMI filters is operable
over the full military (-55 °C to +125 °C) temperature
range with no power derating. The DVME EMI filter
is designed to filter conducted emissions of two
DVFL series DC-DC converters.
•
•
These filters are designed and manufactured in a
facility qualified to ISO9001 and certified to MIL-PRF38534 and MIL-STD-883.
This product may incorporate one or more of the
following U.S. patents:
5,784,266
5,790,389
5,963,438
5,999,433
6,005,780
6,084,792
6,118,673
•
•
•
•
•
•
•
•
•
•
High Reliability
Wide Input Voltage Range: 0 to 50 Volts per
MIL-STD-704
Up to 15.0 Amps Maximum Current
40 dB Minimum Attenuation at 500 kHz
Industry Standard Pinout
High Input Transient Voltage: 80 Volts for 1 sec
per MIL-STD-704A
Precision Seam Welded Hermetic Package
Custom Versions Available
Additional Environmental Screening Available
Meets MIL-STD-461C and MIL-STD-461D EMC
Requirements
Protects Against Conducted Susceptibility
Specified in MIL-STD-461C, CS01 and CS02
MIL-PRF-38534 Element Evaluated
Components
Figure 1 – DVME28 EMI Filter
(Not To Scale)
1X016DSF
11314 4th Avenue
West, Suite 206
Everett, WA 98204
http://www.vpt-inc.com
Sales Information:
Phone: (425) 353-3010
Fax: (425) 353-4030
E-mail: [email protected]
1
DVME28 Series
SPECIFICATIONS (TCASE = -55°C to +125°C, VIN = +28V ± 5%, Full Load, Unless Otherwise Specified)
ABSOLUTE MAXIMUM RATINGS
Input Voltage (Continuous)
Input Voltage (Transient, 1 second)
Output Current
Power Dissipation (Full Load, TCASE = +125°C)
Parameter
50 VDC
80 Volts
15.0 Amps
15.75 Watts
Storage Temperature
Lead Solder Temperature (10 seconds)
Weight (Maximum)
-65°C to +150°C
300°C
77 grams
DVME28
Conditions
Units
Min
Typ
Max
Continuous
0
28
50
V
Transient, 1 sec
-
-
80
V
Continuous
0
-
15.0
A
STATIC
INPUT
2
Voltage
Current
1,2,3
OUTPUT
2
Voltage
Current
Continuous
2,3
VOUT = VIN – (IIN x RDC)
Continuous
0
-
Continuous
-
Continuous
-
NOISE REJECTION
f = 500 kHz
CAPACITANCE
ISOLATION
MTBF (MIL-HDBK-217F)
AIF @ TC = 55°C
DC RESISTANCE
POWER DISSIPATION
Notes:
2
V
15.0
A
-
70
mΩ
-
15.75
W
40
-
-
dB
Pin to Case
60
-
100
nF
Any Pin to Case, 500 VDC
100
-
-
MΩ
-
0.957
-
MHrs
1. Derate linearly to 0 at 135°C.
2. Verified by qualification testing.
3. Rated current applies at any voltage.
BLOCK DIAGRAM
PINS 1, 2, 3
PINS 10, 11, 12
28V IN
28V OUT
CASE
IN COM
OUT COM
PINS 4, 5, 6
PINS 7, 8, 9
Figure 2
1X016DSF
2
DVME28 Series
CONNECTION DIAGRAMS
DVFL2800S DC-DC CONVERTER
DVME28 EMI FILTER
1
12
28V IN
28V OUT
28V IN
28V OUT
28V IN
28V OUT
2
7
28V IN
+V OUT
11
3
+
-
1
10
+S
10
28 Vdc
LOAD
4
9
6
IN COM OUT COM
5
8
SYNC IN
INH2
4
IN COM OUT COM
6
12
9
INH1
7
-S
2
IN COM OUT COM
8
IN COM OUT COM
CASE
3
Figure 3 – DVME28 EMI Filter Hookup with Single Converter
1X016DSF
3
DVME28 Series
CONNECTION DIAGRAMS
DVFL2800S DC-DC CONVERTER
1
7
28V IN
+V OUT
+S
10
LOAD
6
SYNC IN
4
9
INH1
2
-S
IN COM OUT COM
8
3
CASE
DVFL2800S DC-DC CONVERTER
DVME28 EMI FILTER
1
2
3
+
-
28V IN
28V OUT
28V IN
28V OUT
28V IN
28V OUT
12
1
28V IN
+V OUT
11
+S
9
6
8
4
7
2
IN COM OUT COM
5
IN COM OUT COM
6
10
10
28 Vdc
4
7
IN COM OUT COM
LOAD
SYNC IN
INH1
-S
9
8
IN COM OUT COM
CASE
3
Figure 4 – DVME28 EMI Filter Hookup with Two Converters
1X016DSF
4
DVME28 Series
EMI MEASUREMENT METHODS CONNECTION DIAGRAMS
TO 50 OHM INPUT
+V IN
+V OUT
10 uF
CURRENT
TRANSFORMER
TO D.U.T.
10 uF
-V IN
-V OUT
Figure 5 – MIL-STD-461C Measurement Method (Feedthrough Capacitor)
+V IN
+V OUT
50 uH
TO 50 OHM INPUT
-V IN
50 uH
-V OUT
Figure 6 – MIL-STD-461D Measurement Method (LISN)
1X016DSF
5
DVME28 Series
EMI PERFORMANCE CURVES
(TCASE = 25°C, VIN = +28V ± 5%, Full Load, Unless Otherwise Specified)
Figure 7 – MIL-STD-461C
DVFL2800D Without EMI Filter
Figure 8 – MIL-STD-461C
DVFL2800D With DVME28 EMI Filter
Figure 9 – MIL-STD-461D
DVFL2800S With DVME28 EMI Filter
1X016DSF
6
DVME28 Series
PACKAGE SPECIFICATIONS
TOP VIEW
PIN
FUNCTION
1
28V IN
2
28V IN
3
28V IN
4
IN COM
5
IN COM
6
IN COM
7
OUT COM
8
OUT COM
9
OUT COM
10
28V OUT
11
28V OUT
12
28V OUT
SIDE VIEW
Figure 10 – Package and Pinout
(Pin Length is ±0.01”, Other Dimensional Limits are ±0.005” Unless Otherwise Stated)
1X016DSF
7
DVME28 Series
PACKAGE SPECIFICATIONS (DOWN-LEADED)
TOP VIEW
PIN
FUNCTION
1
28V IN
2
28V IN
3
28V IN
4
IN COM
5
IN COM
6
IN COM
7
OUT COM
8
OUT COM
9
OUT COM
10
28V OUT
11
28V OUT
12
28V OUT
SIDE VIEW
Figure 11 – Package and Pinout (With Down-Leaded Pin Extensions Added)
(Pin Length is ±0.01”, Other Dimensional Limits are ±0.005” Unless Otherwise Stated)
1X016DSF
8
DVME28 Series
PACKAGE SPECIFICATIONS (UP-LEADED)
TOP VIEW
PIN
FUNCTION
1
28V IN
2
28V IN
3
28V IN
4
IN COM
5
IN COM
6
IN COM
7
OUT COM
8
OUT COM
9
OUT COM
10
28V OUT
11
28V OUT
12
28V OUT
SIDE VIEW
Figure 12 – Package and Pinout (With Up-Leaded Pin Extensions Added)
(Pin Length is ±0.01”, Other Dimensional Limits are ±0.005” Unless Otherwise Stated)
1X016DSF
9
DVME28 Series
PACKAGE PIN DESCRIPTION
Pins
Function
Description
1, 2, 3
28V IN
Positive Input Voltage Connection
4, 5, 6
IN COM
Input Common Connection
7, 8, 9
OUT COM
Output Common Connection
10, 11, 12
28V OUT
Positive Output Voltage Connection
1X016DSF
10
DVME28 Series
ENVIRONMENTAL SCREENING (100% Tested Per MIL-STD-883 as referenced to MIL-PRF-38534)
Screening
MIL-STD-883
(No Suffix)
Extended
/ES
HB
/HB
Class H
/H
Class K
/K
N/A
N/A
N/A
N/A
N/A
•
•
•
•
•
•
•
•
•
•
Standard
NonDestructive
Bond Pull
N/A – Products do not contain
Wirebonds
Internal
Visual
Method 2017, 2032
Internal Procedure
Temperature
Cycling
Method 1010, Condition C
Method 1010, -55°C to 125°C
•
Constant
Acceleration
Method 2001, 3000g, Y1 Direction
Method 2001, 500g, Y1 Direction
•
PIND
Method 2020, Condition A2
•
Pre Burn-In
Electrical
100% at 25°C
•
Burn-In
Method 1015, 320 hours at +125°C
Method 1015, 160 hours at +125°C
96 hours at +125°C
24 hours at +125°C
•
Final
Electrical
MIL-PRF-38534, Group A1
100% at 25°C
•
Hermeticity
Method 1014, Fine Leak, Condition A
Method 1014, Gross Leak, Condition C
-3
Dip (1 x 10 )
Radiography
Method 20123
External
Visual
Method 2009
Notes:
1X016DSF
1.
2.
3.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
100% R&R testing at –55°C, +25°C, and +125°C with all test data included in product shipment.
PIND test Certificate of Compliance included in product shipment.
Radiographic test Certificate of Compliance and film(s) included in product shipment.
11
DVME28 Series
ORDERING INFORMATION
DVME
28
DL
/HB
1
2
3
4
-
XXX
5
(1)
(2)
(3)
(4)
(5)
Product Series
Nominal Input
Voltage
Package Option
Screening Code1, 2
Additional
Screening Code
DVME
Notes:
28
1.
2.
28 Volts
None
DL
UL
Standard
Down-Lead
Up-Lead
None
/ES
/HB
/H
/K
Standard
Extended
HB
Class H
Class K
Contact Sales
Contact the VPT Inc. Sales Department for availability of Class H (/H) or Class K (/K) qualified products.
VPT Inc. reserves the right to ship higher screened or SMD products to meet lower screened orders at our
sole discretion unless specifically forbidden by customer contract.
Please contact your sales representative or the VPT Inc. Sales Department for more information
concerning additional environmental screening and testing, different input voltage, output voltage,
power requirement, source inspection, and/or special element evaluation for space or other higher
quality applications.
1X016DSF
12
DVME28 Series
SMD (STANDARD MICROCIRCUIT DRAWING) NUMBERS
Standard Microcircuit
Drawing (SMD)
DVME28 Series
Similar Part Number
*T.B.D.
DVME28
Do not use the DVME28 Series similar part number for SMD product acquisition. It is listed for
reference only. For exact specifications for the SMD product, refer to the SMD drawing. SMD’s can be
downloaded from the DSCC website at http://www.dscc.dla.mil/programs/smcr/. The SMD number
listed above is for MIL-PRF-38534 Class H screening, standard gold plated lead finish, and no RHA
(Radiation Hardness Assurance) level. Please reference the SMD for other screening levels, lead
finishes, and radiation levels.
CONTACT INFORMATION
To request a quotation or place orders please contact your sales representative or the VPT Inc. Sales
Department at:
Phone:
Fax:
E-mail:
(425) 353-3010
(425) 353-4030
[email protected]
All information contained in this datasheet is believed to be accurate, however, no responsibility is assumed for possible errors
or omissions. The products or specifications contained herein are subject to change without notice.
1X016DSF
13
Similar pages