OPLINK EVOA1600000215 Electronically variable optical attenuator Datasheet

Electronically Variable Optical
Attenuators
EVOA Series
Product Description
Oplink’s electronically variable optical attenuator (EVOA) is a high performance
opto-mechanical device. EVOA operates by moving an obstructing element into
the optical beam and the position of the obstructing element can be adjusted by
an integrated, electronically controlled step motor, resulting in fine tuning of attenuation.
Oplink’s EVOA features a large dynamic attenuation range of >30dB and an excellent optical performance over C- or L-band. Its latching operation retains recent
attenuation setting upon removal of drive voltage. Applications include pre-emphasis attenuation, detector saturation control, in-line power equalization and
amplifier power control applications. Also, it can be used to extend the dynamic
range of optical measurement instruments.
Oplink’s EVOA is designed to withstand the diverse environmental conditions and
compliance to the Telcordia standard GR-1221.
Oplink can provide customized designs to meet specialized feature applications.
Also, Oplink offers modular assemblies that integrate other components to form
a full function module or subsystem.
Performance Specificationns
Parameter
Min
[1]
0
Attenuation range
Temperature dependence of attenuation
Max
1525 ~ 1570 or 1570 ~1610
Operating wavelength range
Insertion Loss
Typical
[2]
Unit
nm
Features
1.0
dB
30
dB
 Operates over C or L Band
0.15
dB
Wavelength dependence of attenuation
0~15dB Attenuation
15~30dB attenuation
0.2
0.3
dB
Polarization dependence of attenuation
0 to15 dB
> 15 dB
0.15
0.2
dB
0.1
ps
PMD
Return Loss
40
[1]
 Low Insertion Loss and PDL
 Latching Capability
 PCB Mountable
dB
Resolution
0.15
dB
Applications
Repeatability
0.2
dB
 Pre-emphasis Attenuation
0.3
dB
 Detector Input Power Control
0.2
sec
 In-line Power Equalization
100
mW
 Gain Control in Optical Amplifiers
Back lash
Response speed
[3]
Optical power
Operating Temperature
-5 to +70
°C
 On/Off Switch
Storage Temperature
-40 to +85
°C
 Instrumentation, Testing and
Measurement
Fiber type
SMF-28
POT resistance
9
Package Dimensions
Notes:
1) Excluding connectors.
10
11
P2: 50.0 (L) ×25.0 (W) × 12.0 (H
P3: 45.0 (L) ×18.0 (W) × 12.0 (H)
2) Relative to 23°C.
KΩ
mm
3) At 3 dB attenuation change.
R09.20090302
Electronically Variable Optical Attenuators
EVOA Series
Mechanical Drawing / Package Dimensions (dimension in mm)
2) Mini Package Type P3
46335 Landing Pkwy Fremont, CA 94538 Tel: (510) 933-7200 Fax: (510) 933-7300 Email: [email protected] • www.oplink.com
1) Standard Package Type P2
Electrical Connector Configuration P2
Pin#
Pin1
Pin2
Pin3
Pin4
Function
Motor
Phase
A-
Motor
Phase
B+
Motor
Phase
B-
Motor
Phase
A+
Electrical Connector Configuration P3
Pin5
Pot
Wiper
Pin6
Pot
+V
Pin7
Pot
GND
Pin8
Pin#
NC
Function
Pin1
Pot
GND
Pin2
Pin3
Pin4
Pin5
Pin6
Pin7
Pot
wiper
Motor
Phase
A-
Motor
Phase
B+
Motor
Phase
B-
Motor
Phase
A+
Pot
+V
Ordering Information
Oplink can provide a remarkable range of customized optical solutions. For detail, please contact Oplink’s OEM
design team or account manager for your requirements and ordering information (510) 933-7200.
0
EVOA
0
0
Operating Wavelength
Package Type
Fiber Length
C Band = 1550
L Band = 1600
P2 = 2
P3 = 3
0.5meter= H
1.0meter= 1
1.5meter= 5
2.0meter= 2
Fiber Type
SMF-28 250µm =1
SMF-28 w/ 900µm loose tube =2
Connector
Type
None = 1
FC/PC=2
FC/SPC=3
FC/APC=4
SC/PC=5
SC/SPC=6
SC/APC=7
ST=8
LC=9
MU=A
R09.20090302
Product Lines:  Mux/Demux  Switching/Routing  Coupling/Splitting  Monitoring/Conditioning  Amplification  Transmission  Interconnect  RGB Laser Modules
Similar pages