Vishay ES1PB High current density surface mount ultrafast rectifier Datasheet

New Product
ES1PB, ES1PC, ES1PD
Vishay General Semiconductor
High Current Density Surface Mount Ultrafast Rectifiers
FEATURES
• Very low profile - typical height of 1.0 mm
®
• Ideal for automated placement
eSMP Series
• Glass passivated chip junction
• Ultrafast recovery times for high efficiency
• Low forward voltage, low power losses
• Low thermal resistance
• Meets MSL level 1 per J-STD-020, LF maximum
peak of 260 °C
DO-220AA (SMP)
• AEC-Q101 qualified
• Compliant to RoHS Directive 2002/95/EC and in
accordance to WEEE 2002/96/EC
• Halogen-free according to IEC 61249-2-21 definition
PRIMARY CHARACTERISTICS
IF(AV)
1.0 A
VRRM
100 V, 150 V, 200 V
trr
15 ns
VF
0.92 V
TJ max.
150 °C
TYPICAL APPLICATIONS
For use in secondary rectification and freewheeling for
ultrafast switching speeds of AC/DC and DC/DC converters
for both consumer and automotive applications.
MECHANICAL DATA
Case: DO-220AA (SMP)
Molding compound meets UL 94 V-0 flammability rating
Base P/N-M3 - halogen-free, RoHS compliant, and
commercial grade
Base P/NHM3 - halogen-free, RoHS compliant, and
automotive grade
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
M3 suffix meets JESD 201 class 1A whisker test, HM3 suffix
meets JESD 201 class 2 whisker test
Polarity: Color band denotes the cathode end
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
Device marking code
ES1PB
ES1PC
ES1PD
EB
EC
ED
100
150
200
UNIT
Maximum repetitive peak reverse voltage
VRRM
Maximum average forward rectified current (fig. 1)
IF(AV)
1.0
A
Peak forward surge current 10 ms single half sine-wave
superimposed on rated load
IFSM
30
A
TJ, TSTG
- 55 to + 150
°C
Operating junction and storage temperature range
Document Number: 88918
Revision: 19-Apr-11
V
For technical questions within your region, please contact one of the following:
www.vishay.com
[email protected], [email protected], [email protected]
1
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
New Product
ES1PB, ES1PC, ES1PD
Vishay General Semiconductor
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
TEST CONDITIONS
IF = 0.6 A
Maximum instantaneous
forward voltage
IF = 1 A
TJ = 25 °C
IF = 0.5 A, IR = 1 A, Irr = 0.25 A
Typical reverse recovery time
IF = 1.0 A, VR = 30 V,
dI/dt = 50 A/μs, Irr = 10 % IRM
IF = 1.0 A, VR = 30 V,
dI/dt = 50 A/μs, Irr = 10 % IRM
UNIT
0.865
V
0.920
μA
500
trr
TJ = 25 °C
VALUE
5.0
IR (2)
TJ = 125 °C
Maximum reverse recovery time
Typical junction capacitance
VF (1)
TJ = 25 °C
Maximum reverse current at
rated VR
Typical stored charge
SYMBOL
15
ns
25
trr
TJ = 100 °C
TJ = 25 °C
ns
30
8
Qrr
TJ = 100 °C
4.0 V, 1 MHz
nC
10
10
CJ
pF
Notes
(1) Pulse test: 300 μs pulse width, 1 % duty cycle
(2) Pulse test: Pulse width  40 ms
THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
Typical thermal resistance
ES1PB
ES1PC
RJA (1)
105
RJL (1)
15
RJC (1)
20
ES1PD
UNIT
°C/W
Note
(1)
Thermal resistance from junction to ambient and junction to lead mounted on P.C.B. with 5.0 mm x 5.0 mm copper pad areas. RJL is
measured at the terminal of cathode band. RJC is measured at the top center of the body
ORDERING INFORMATION (Example)
PREFERRED P/N
ES1PB-M3/84A
ES1PB-M3/85A
UNIT WEIGHT (g)
PREFERRED PACKAGE CODE
BASE QUANTITY
DELIVERY MODE
0.024
84A
3000
7" diameter plastic tape and reel
0.024
85A
10 000
13" diameter plastic tape and reel
ES1PBHM3/84A
(1)
0.024
84A
3000
7" diameter plastic tape and reel
ES1PBHM3/85A
(1)
0.024
85A
10 000
13" diameter plastic tape and reel
Note
(1) Automotive grade
www.vishay.com
2
For technical questions within your region, please contact one of the following:
Document Number: 88918
[email protected], [email protected], [email protected]
Revision: 19-Apr-11
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
New Product
ES1PB, ES1PC, ES1PD
Vishay General Semiconductor
RATINGS AND CHARACTERISTICS CURVES
(TA = 25 C unless otherwise noted)
10 000
Instantaneous Reverse Current (μA)
Average Forward Rectified Current (A)
1.2
1.0
0.8
0.6
0.4
TL Measured
at the Cathode Band Terminal
0.2
0
100
TJ = 125 °C
10
1
TJ = 25 °C
0.1
0.01
80
90
100
110
120
130
140
10
150
20
30
60
50
70
80
90
100
Percent of Rated Peak Reverse Voltage (%)
Fig. 1 - Maximum Forward Current Derating Curve
Fig. 4 - Typical Reverse Leakage Characteristics
100
Junction Capacitance (pF)
25
20
15
10
5
0
10
1
0.1
100
10
1
1
Number of Cycles at 50 Hz
Transient Thermal Impedance (°C/W)
1000
TJ = 150 °C
1
TJ = 25 °C
0.1
TJ = 125 °C
0.01
0.2
100
Fig. 5 - Typical Junction Capacitance
100
10
10
Reverse Voltage (V)
Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current
Instantaneous Forward Current (A)
40
Lead Temperature (°C)
30
Peak Forward Surge Current (A)
TJ = 150 °C
1000
0.4
0.6
0.8
1.0
1.2
1.4
100
10
1
0.01
0.1
1
10
100
Instantaneous Forward Voltage (V)
t - Pulse Duration (s)
Fig. 3 - Typical Instantaneous Forward Characteristics
Fig. 6 - Typical Transient Thermal Impedance
Document Number: 88918
Revision: 19-Apr-11
For technical questions within your region, please contact one of the following:
www.vishay.com
[email protected], [email protected], [email protected]
3
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
New Product
ES1PB, ES1PC, ES1PD
Vishay General Semiconductor
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
DO-220AA (SMP)
0.012 (0.30) REF.
Cathode Band
0.053 (1.35)
0.041 (1.05)
0.086 (2.18)
0.074 (1.88)
0.142 (3.61)
0.126 (3.19)
0.036 (0.91)
0.024 (0.61)
0.032 (0.80)
0.016 (0.40)
0.103 (2.60)
0.087 (2.20)
0.158 (4.00)
0.146 (3.70)
0.105
(2.67)
0.013 (0.35)
0.004 (0.10)
0.045 (1.15)
0.033 (0.85)
0.012 (0.30) 0.018 (0.45)
0.000 (0.00) 0.006 (0.15)
www.vishay.com
4
0.025 0.030
(0.635) (0.762)
0.100
(2.54)
0.050
(1.27)
For technical questions within your region, please contact one of the following:
Document Number: 88918
[email protected], [email protected], [email protected]
Revision: 19-Apr-11
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 11-Mar-11
www.vishay.com
1
Similar pages