GS220 220W AC-DC Single Output Desktop series Features : Universal AC input / Full range 3 pole AC inlet IEC320-C14 Built-in active PFC function, PF>0.91 Protections: Short circuit / Overload / Over voltage / Over temperature Fully enclosed plastic case Approvals: UL / CUL / PSE / TUV / BSMI / CCC / CB / FCC / CE Class power (with earth pin) LED indicator for power on No load power consumption<0.5W ErP step2 compliant NRCan compliant Meet EISA 2007 (Energy Independence and Security Act) 2 years warranty (except for 48V) SPECIFICATION ORDER NO. SAFETY MODEL NO. DC VOLTAGE OUTPUT GS220A24-R7B GS220A48-R7B GS220A12 GS220A15 15V GS220A20 20V GS220A24 24V GS220A48 48V 15A 13.4A 11A 9.2A 4.6A 0 ~ 15A 0 ~ 13.4A 0 ~ 11A 0 ~ 9.2A 0 ~ 4.6A RATED POWER (max.) 180W RIPPLE & NOISE (max.) Note.3 80mVp-p 201W 220W 221W 221W 100mVp-p 150mVp-p 180mVp-p 240mVp-p VOLTAGE TOLERANCE Note.4 5.0% 5.0% 4.0% 3.0% 2.0% LINE REGULATION 1.0% 1.0% 1.0% 1.0% 1.0% 5.0% 5.0% 4.0% 3.0% 2.0% 93.5% 94.5% Note.5 SETUP, RISE TIME Note.7 2000ms, 20ms / 230VAC HOLD UP TIME (Typ.) VOLTAGE RANGE Note.8 90 ~ 264VAC 20ms / 230VAC 2000ms, 20ms / 115VAC at full load 20ms / 115VAC at full load 127 ~ 370VDC FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) PF>0.91 / 230VAC EFFICIENCY (Typ.) 90% AC CURRENT (Typ.) INRUSH CURRENT (max.) 4A / 115VAC PROTECTION OVER VOLTAGE PF>0.98 / 115VAC at full load 90% 92% 2A / 230VAC 120A / 230VAC 1.5mA / 240VAC 105 ~ 135% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed 105 ~ 135% rated output voltage Protection type : Shut down o/p voltage, re-power on to recover OVER TEMPERATURE 95 5 (TSW1) detect on heatsink of power transistor Protection type : Shut down o/p voltage, recovers automatically after temperature goes down WORKING TEMP. WORKING HUMIDITY -30 ~ +60 (Refer to "Derating Curve") 20% ~ 90% RH non-condensing ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS SAFETY & WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC (Note. 6) EMC EMISSION EMC IMMUNITY NOTE GS220A20-R7B CURRENT RANGE OVERLOAD CONNECTOR GS220A15-R7B RATED CURRENT LEAKAGE CURRENT(max.) OTHERS geprUfre Sicherheit GS220A12-R7B Note.2 12V LOAD REGULATION INPUT TUV Rheinland Product Safety -40 ~ +85 , 10 ~ 95% RH 0.03% / (0~50 ) 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes UL60950-1, TUV EN60950-1, BSMI CNS14336, CCC GB4943, J60950-1(except for 48V) approved I/P-O/P: 3KVAC I/P-O/P:100M Ohms / 500VDC / 25 / 70% RH Compliance to EN55022 class B, EN61000-3-2,3, FCC PART 15 class B / CISPR22 class B, CNS13438 class B, GB9254 class B, GB17625.1 Compliance to EN61000-4-2,3,4,5,6,8,11, light industry level, criteria A PACKING PLUG 191.3Khrs min. MIL-HDBK-217F(25 ) 210*85*46mm (L*W*H) 1.1Kg; 12pcs/14.2Kg/0.73CUFT See page 2 ; Other type available by customer requested CABLE See page 2 ; Other type available by customer requested MTBF DIMENSION 1. All parameters are specified at 230VAC input, rated load, 25 70% RH ambient. 2. DC voltage: The output voltage set at point measure by plug terminal & 50% load. 3. Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor. 4. Tolerance: includes set up tolerance, line regulation, load regulation. 5. Line regulation is measured from low line to high line at rated load. 6. The power supply is considered as an independent unit, but the final equipment still need to re-confirm that the whole system complies with the EMC directives. 7. Length of set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase of the set up time. 8. Derating may be needed under low input voltage. Please check the derating curve for more details. File Name:GS220-SPEC 2012-03-06 GS220 220W AC-DC Single Output Desktop Mechanical Specification Case No.961A 46 series Unit:mm 210 UL1185 16AWGx4C 1000 50mm 30 3mm POWER LED 85 23 14 Plug Assignment Standard plug: R7B R7B PIN NO. OUTPUT 2 1 3 4 1,4 +V 2,3 -V AC FG -V connected to AC FG Derating Curve Static Characteristics 100 230VAC 100 90 For others 80 80 For 12~15V 70 100VAC for others 110VAC for 12~15V 50 LOAD (%) LOAD (%) 60 40 20 -30 0 10 20 30 40 50 AMBIENT TEMPERATURE ( ) 60 70 (HORIZONTAL) 60 50 40 90 95 100 110 120 140 160 180 200 220 240 264 INPUT VOLTAGE (VAC) 60Hz File Name:GS220-SPEC 2012-03-06