BDS16 BDS16SMD BDS17 BDS17SMD MECHANICAL DATA Dimensions in mm BDS16SMD05 BDS17SMD05 SILICON NPN EPITAXIAL BASE IN TO220 METAL AND SMD CERAMIC SURFACE MOUNT PACKAGES FEATURES • • • • • HERMETIC METAL OR CERAMIC PACKAGES HIGH RELIABILITY MILITARY AND SPACE OPTIONS SCREENING TO CECC LEVELS FULLY ISOLATED (METAL VERSION) APPLICATIONS TO220M - TO220 Metal Package - Isolated Pin 1 – Base Pin 2 – Collector Pin 3 – Emitter 7.54 (0.296) 0.76 (0.030) 3 .6 0 (0 .1 4 2 ) M a x . min. 2.41 (0.095) 3.175 (0.125) Max. 2.41 (0.095) 3 3 10.16 (0.400) 5.72 (.225) 2 1 0.76 (0.030) min. 1 3.05 (0.120) 0.127 (0.005) 1 6 .0 2 (0 .6 3 1 ) 1 5 .7 3 (0 .6 1 9 ) 4 .1 4 (0 .1 6 3 ) 3 .8 4 (0 .1 5 1 ) 0 .8 9 (0 .0 3 5 ) m in . 3 .7 0 (0 .1 4 6 ) 3 .4 1 (0 .1 3 4 ) 1 0 .6 9 (0 .4 2 1 ) 1 0 .3 9 (0 .4 0 9 ) 0 .7 6 (0 .0 3 0 ) m in . 3 .7 0 (0 .1 4 6 ) 3 .4 1 (0 .1 3 4 ) • POWER LINEAR AND SWITCHING APPLICATIONS • GENERAL PURPOSE POWER 2 0.127 (0.005) 9 .6 9 .3 1 1 .5 1 1 .2 7 (0 8 (0 8 (0 8 (0 .3 8 .3 6 .4 5 .4 4 1 ) 9 ) 6 ) 4 ) 0 .5 0 (0 .0 2 0 ) 0 .2 6 (0 .0 1 0 ) SMD1(TO276AB)- Ceramic Surface Mount Package Pad 1 – Base Pad 2 – Collector Pad 3 – Emitter 0.50 (0.020) max. 7.26 (0.286) SMD05 (TO276AA)- Ceramic Surface Mount Package Pad 1 – Base Pad 2 – Collector Pad 3 – Emitter ABSOLUTE MAXIMUM RATINGS (Tcase=25°C unless otherwise stated) VCBO VCEO VEBO IE , IC IB Ptot Tstg Tj 0.127 (0.005) 16 PLCS 0.50(0.020) Collector - Base voltage (IE = 0) Collector - Emitter voltage (IB = 0) Emitter - Base voltage (IC = 0) Emitter , Collector current Base current Total power dissipation at Tcase = 25°C Storage Temperature Junction Temperature BDS16 120V 120V BDS17 150V 150V 5V 8A 2A 43.75W –65 TO 200°C 200°C Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: [email protected] Website: http://www.semelab.co.uk Document Number 3347 Issue 2 BDS16 BDS16SMD BDS17 BDS17SMD BDS16SMD05 BDS17SMD05 ELECTRICAL CHARACTERISTICS (Tcase = 25°C unless otherwise stated) Parameter Test Conditions VBE(on)* Collector cut-off current (IE = 0) Collector cut-off current (IB = 0) Emitter cut-off current (IC = 0) Collector - Emitter sustaining voltage (IB = 0) Collector - Emitter saturation voltage Base - Emitter voltage hFE* DC Current gain fT Transition frequency ICBO ICEO IEBO VCEO(sus)* VCE(sat)* BDS16 BDS17 VCB = 120V VCB = 150V BDS16 VCE = 60V BDS17 VEB = 5V BDS16 BDS17 IC = 4A VCE = 75V IC = 0.5A IC = 1A IC = 0.5A IC = 4A IC = 0.5A F = 20MHz Min. IC = 100mA Typ. Max. 20 20 0.1 0.1 10 120 150 IB = 0.4A IB = 0.05A VCE = 2V VCE = 2V VCE = 2V VCE = 10V Unit µA mA µA V 1.5 0.4 1.0 250 150 40 15 V V V MHz 30 *Pulsed : Pulse duration = 300 µs , duty cycle = 1.5% SWITCHING CHARACTERISTICS Parameter ton On Time ts tf Storage Time Fall Time Test Conditions (td + tr) IC = 2A VCC = 80V IB1 = 0.2A IC = 2A VCC = 80V IB1 = –IB2 = 0.2A Max. Unit 0.5 µs 1.5 0.3 µs µs THERMAL DATA RTHj-case Thermal resistance junction - case Max. 4.0 °C/W Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: [email protected] Website: http://www.semelab.co.uk Document Number 3347 Issue 2