SUTEX CL525N3-GP003 Linear, fixed constant current led driver Datasheet

Supertex inc.
CL525
Linear, Fixed Constant Current
LED Driver
Features
General Description
►► 25mA ±10% constant current drive
►► 1.0V dropout
►► 90V rating for transient immunity
►► Temperature compensated
►► 4.75 - 90V supply range
The CL525 is a fixed, linear current regulator designed for
driving LEDs at 25mA. With a maximum rating of 90V, it is able
to withstand transients without the need for additional transient
protection circuitry. It is ideally suited for applications employing
single or multiple LEDs.
The minimum dropout voltage of 1.0V accommodates extra
LEDs, permits lower supply voltages, and provides more
efficient operation.
Applications
►► Specialty lighting
►► Low voltage signage
The CL525 is offered in TO-252(D-PAK) and TO-92 packages.
Typical Application Circuit
VIN
4.75 – 90V
100nF
20mA
OUT
VDD
Control
CL525
Doc.# DSFP-CL525
A052013
20mA
GND
Supertex inc.
www.supertex.com
CL525
Ordering Information
Pin Configurations
Part Number
Package Options
Packing
CL525K4-G
TO-252 (D-PAK)
2000/Reel
CL525N3-G
TO-92
1000/Bag
CL525N3-G P002
TO-92
2000/Reel
CL525N3-G P003
TO-92
2000/Reel
CL525N3-G P005
TO-92
2000/Reel
CL525N3-G P013
TO-92
2000/Reel
CL525N3-G P014
TO-92
2000/Reel
GND
OUT
TO-252 (D-PAK)
Value
Output voltage, VOUT
-0.5V to +100V
Operating junction temperature
-40°C to +125°C
Storage temperature
-65°C to +150°C
YY = Year Sealed
WW = Week Sealed
L = Lot Number
= “Green” Packaging
Si YYWW
CL525K4
LLLLLLL
Absolute Maximum Ratings
-0.5V to +100V
TO-92
Product Marking
Refer to ‘P0xx’ Tape & Reel Specs for P002, P003, P005, P013, and P014
TO-92 Taping Specifications and Winding Styles
Supply voltage, VDD
OUT
VDD
-G denotes a lead (Pb)-free / RoHS compliant package
Parameter
GND
VDD
Package may or may not include the following marks: Si or
TO-252 (D-PAK)
Si C L
5 2 5
YYWW
Absolute Maximum Ratings are those values beyond which damage to the
device may occur. Functional operation under these conditions is not implied.
Continuous operation of the device at the absolute rating level may affect
device reliability. All voltages are referenced to device ground..
YY = Year Sealed
WW = Week Sealed
= “Green” Packaging
Package may or may not include the following marks: Si or
TO-92
Typical Thermal Resistance
Package
θja
TO-252 (D-PAK)
81OC/W*
TO-92
132OC/W*
Notes:
1. Thermal considerations may limit voltage to less than 90V.
* Mounted on JEDEC test PCB (2s 2p)
Recommended Operating Conditions (all voltages with respect to GND pin)
Sym
Parameter
VDD
Supply voltage
VOUT
Voltage at OUT pin
1
Min
Typ
Max
Units
4.75
-
90
V
---
1.0
-
90
V
---
C
---
nF
---
TJ
Junction temperature
-40
-
125
CDD
VDD bypass capacitor
100
-
-
Doc.# DSFP-CL525
A052013
2
o
Conditions
Supertex inc.
www.supertex.com
CL525
Electrical Characteristics
(Over recommended operating conditions. TA = 25OC unless otherwise specified. All voltages with respect to GND pin)
Sym
Parameter
IDD
Current into VDD pin
IOUT
Current into OUT pin
Min
Typ
Max
-
-
1.0
22.5
25
27.5
-
-
27.5
Units Conditions
mA
mA
--1.0V < VOUT < 90V
VOUT <1.0V
IOUT(OFF)
Current into OUT pin with VDD pin open
-
-
10
µA
VDD = open
VDD(OFF)
Voltage at VDD to shut off LED current
-
-
1.0
V
IOUT < 10µA
tON
VDD applied on time
-
-
100
µs
---
tOFF
VDD removed off time
-
-
100
µs
---
Current
(Normalized to 25OC at VOUT = 1.0V)
Temperature Effects
1.02
1.00
VOUT = 90V, 100ms
VOUT = 1.0V
0.98
0.96
0.94
0.92
-40
-50
0
25
50
100
120
150
Junction Temperature (OC)
Application Circuits
Seperate LED Supply
Switched LED
(VOUT may be higher or lower than VDD.)
VIN
4.75 – 90V
100nF
IOUT
Control
VDD
OUT
VDD
25mA
Control
GND
Doc.# DSFP-CL525
A052013
VIN
VDD
OUT
25mA
GND
3
Supertex inc.
www.supertex.com
CL525
Application Circuits (cont.)
Ground Referenced LEDs
VIN
VDD
100nF
Control
OUT
25mA
VLED + 4.75V ≤ VIN ≤ VLED + 90V
ILED = IOUT + IDD
GND
Pin Description
Pin #
TO-252
D-PAK
(K4)
TO-92
(N3)
Name
1
1
VDD
Supply voltage for the CL525. Bypass locally with a 100nF capacitor to
ground.
3
2
OUT
Constant current output (sink).
4
3
GND
Circuit common.
Doc.# DSFP-CL525
A052013
Description
4
Supertex inc.
www.supertex.com
CL525
3-Lead TO-252 D-PAK Package Outline (K4)
b3
E
A
c2
E1
4
L3
θ1
D1
H
D
1
2
3
L4
L5
Note 1
View B
b2
b
e
Front View
Side View
Rear View
Gauge
Plane
A1
Seating
Plane
L2
θ
L
L1
View B
Note:
1. Although 4 terminal locations are shown, only 3 are functional. Lead number 2 was removed.
Symbol
Dimension
(inches)
A
A1
b
b2
b3
c2
D
D1
E
E1
MIN
.086
.000*
.025
.030
.195
.018
.235
.205
.250
.170
NOM
-
-
-
-
-
-
.240
-
-
-
MAX
.094
.005
.035
.045
.215
.035
.245
.217*
.265
.182*
e
.090
BSC
H
L
.370
.055
-
.060
.410
.070
L1
.108
REF
L2
.020
BSC
L3
L4
L5
θ
θ1
.035
.025*
.045
0
0O
-
-
-
-
.050
.040
.060
10
O
O
15O
JEDEC Registration TO-252, Variation AA, Issue E, June 2004.
* This dimension is not specified in the JEDEC drawing.
Drawings not to scale.
Supertex Doc. #: DSPD-3TO252K4, Version E041309.
Doc.# DSFP-CL525
A052013
5
Supertex inc.
www.supertex.com
CL525
3-Lead TO-92 Package Outline (N3)
D
A
Seating
Plane
1
2
3
L
c
b
e1
e
Side View
Front View
E1
E
1
3
2
Bottom View
Symbol
Dimensions
(inches)
A
b
c
D
E
E1
e
e1
L
MIN
.170
.014†
.014†
.175
.125
.080
.095
.045
.500
NOM
-
-
-
-
-
-
-
-
-
MAX
.210
.022†
.022†
.205
.165
.105
.105
.055
.610*
JEDEC Registration TO-92.
* This dimension is not specified in the JEDEC drawing.
† This dimension differs from the JEDEC drawing.
Drawings not to scale.
Supertex Doc.#: DSPD-3TO92N3, Version E041009.
(The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline
information go to http://www.supertex.com/packaging.html.)
Supertex inc. does not recommend the use of its products in life support applications, and will not knowingly sell them for use in such applications unless it receives
an adequate “product liability indemnification insurance agreement.” Supertex inc. does not assume responsibility for use of devices described, and limits its liability
to the replacement of the devices determined defective due to workmanship. No responsibility is assumed for possible omissions and inaccuracies. Circuitry and
specifications are subject to change without notice. For the latest product specifications refer to the Supertex inc. (website: http//www.supertex.com)
Supertex inc.
©2013 Supertex inc. All rights reserved. Unauthorized use or reproduction is prohibited.
Doc.# DSFP-CL525
A052013
6
1235 Bordeaux Drive, Sunnyvale, CA 94089
Tel: 408-222-8888
www.supertex.com
Similar pages