Online data sheet C4C-SA12030A10000, C4C-EA12030A10000 deTec4 Core SAFETY LIGHT CURTAINS C4C-SA12030A10000, C4C-EA12030A10000 | deTec4 Core SAFETY LIGHT CURTAINS A B C D E F H I J K L M N O P Q R S T Ordering information System part Type Part no. Sender C4C-SA12030A10000 1211501 C4C-EA12030A10000 1211502 Receiver Other models and accessories www.sick.com/deTec4_Core Detailed technical data Features System part Sender/receiver pair with QuickFix bracket Resolution 30 mm Protective field height 1,200 mm Scanning range Minimum 0 m ... 10 m Typical 0 m ... 12 m Response time 12 ms Synchronization Optical synchronisation Safety-related parameters Type Type 4 (IEC 61496) Safety integrity level SIL3 (IEC 61508) SILCL3 (EN 62061) Category Category 4 (EN ISO 13849) Performance level PL e (EN ISO 13849) PFHD (mean probability of a dangerous failure per hour) 3,7 x 10-9 (EN ISO 13849) TM (mission time) 20 years (EN ISO 13849) Safe state in the event of a fault At least one OSSD is in the OFF state. Interfaces System connection Connection type Male connector M12, 5-pin Permitted cable length ≤ 50 m Fieldbus, industrial network 1) 2 For additional information on Flexi Soft -> www.sick.com/Flexi_Soft. OPTO-ELECTRONIC PROTECTIVE DEVICES | SICK Online data sheet | 2017-08-21 16:38:06 Subject to change without notice C4C-SA12030A10000, C4C-EA12030A10000 | deTec4 Core SAFETY LIGHT CURTAINS Integration via Flexi Soft safety controller CANopen, DeviceNet™, EtherCAT®, EtherNet/IP™, Modbus TCP, PROFIBUS DP, PROFINET 1) 1) For additional information on Flexi Soft -> www.sick.com/Flexi_Soft. Electrical data Protection class III (EN 50178) Supply voltage VS 24 V DC (19.2 V DC ... 28.8 V DC) Ripple ≤ 2.4 Vpp 1) Power consumption typical 2.21 W / 1.1 W (depending on type) Safety outputs (OSSD) Type of output 2 PNP semiconductors, short-circuit protected, cross-circuit monitored 2) Switching voltage HIGH 24 V DC (VS – 2.25 V DC ... VS) Switching voltage LOW ≤ 2 V DC Switching current ≤ 300 mA 1) 2) Within the limits of VS. Applies to the voltage range between –30 V and +30 V. Mechanical data Housing cross-section (incl. system connection) 34 mm x 30.7 mm Housing material Aluminum extruded profile Weight 1,120 g / 1,110 g (depending on type) Ambient data Enclosure rating IP65 (EN 60529) IP67 (EN 60529) Ambient operating temperature –30 °C ... +55 °C Storage temperature –30 °C ... +70 °C Air humidity 15 % ... 95 %, Non-condensing Vibration resistance 5 g, 10 Hz ... 55 Hz (EN 60068-2-6) Shock resistance 10 g, 16 ms (EN 60068-2-29) Other information Wave length 850 nm Classifications ECl@ss 5.0 27272704 ECl@ss 5.1.4 27272704 ECl@ss 6.0 27272704 ECl@ss 6.2 27272704 ECl@ss 7.0 27272704 ECl@ss 8.0 27272704 ECl@ss 8.1 27272704 ECl@ss 9.0 27272704 ETIM 5.0 EC002549 ETIM 6.0 EC002549 2017-08-21 16:38:06 | Online data sheet Subject to change without notice OPTO-ELECTRONIC PROTECTIVE DEVICES | SICK 3 C4C-SA12030A10000, C4C-EA12030A10000 | deTec4 Core SAFETY LIGHT CURTAINS UNSPSC 16.0901 46171620 Dimensional drawing (Dimensions in mm (inch)) 21.1 (0.83) 13 56.8 (0.51) (2.24) 30.7 (1.21) 29.5 L (1.16) L 34 6.3 (0.25) (4.2) 106.8 21.8 (0.86) 5 56.8 (2.24) 13.8 L=150 (5.91) 1 4 4 (0.16) 56.8 (0.54) 14 (0.55) 30 30.7 (1.21) (1.18) (1.34) (2.24) H I J K L M N O P Q R S T (0.2) A B C D E F 7 (0.28) 12 (0.47) 2 5 3 L 4 300 313 450 463 600 613 750 763 900 913 1,050 1,063 1,200 1,213 1,350 1,362 1,500 1,512 1,650 1,662 1,800 1,812 1,950 1,962 2,100 2112 OPTO-ELECTRONIC PROTECTIVE DEVICES | SICK Online data sheet | 2017-08-21 16:38:06 Subject to change without notice C4C-SA12030A10000, C4C-EA12030A10000 | deTec4 Core SAFETY LIGHT CURTAINS Connection diagram deTec4 Core safety light curtain connected to UE48-2OS safety relay 24 V DC 1 +24V 2 n.c. 3 OSSD1 2 GND 3 GND 4 n.c. 5 +24V 1 OSSD2 4 n.c. n.c. 5 S1 S33 S11 S12 S31 A1 k1 k2 13 23 31 14 24 32 UE48-2OS2D2 S34 S35 S21 S22 A2 K1 K2 0 V DC E114585/01/2014-05-08 Task Connection of a deTec4 Core safety light curtain to UE48-2OS. Operating mode: with restart interlock and external device monitoring. Function When the light path is clear, the OSSD1 and OSSD2 outputs are live. The system is ready to switch on if K1 and K2 are de-energized. By pressing S1 (button is pressed and released), the UE48-2OS is energized and its 13 - 14 and 23 - 24 contacts activate K1 and K2. On interruption of one of the light beams, the UE48-2OS is de-energized by the OSSD1 and OSSD2 outputs and K1 and K2 are deactivated. Fault analysis OSSD cross-circuits and short-circuits are detected and lead to the inhibited state (lock-out). The incorrect functioning of one of the K1 or K2 contactors will be detected and does not result in the loss of the shutdown function. Jamming of the S1 button will prevent the UE48-2OS from enabling. Comments 1) Output circuits: These contacts are to be connected to the controller such that, with the output circuit open, the dangerous state is disabled. For categories 4 and 3, the integration must be dual-channel (x/y paths). Single-channel integration in the control (z path) is only possible with a single-channel control and by taking the risk analysis into account. 2017-08-21 16:38:06 | Online data sheet Subject to change without notice OPTO-ELECTRONIC PROTECTIVE DEVICES | SICK 5 C4C-SA12030A10000, C4C-EA12030A10000 | deTec4 Core SAFETY LIGHT CURTAINS A B C D E F Recommended accessories Other models and accessories www.sick.com/deTec4_Core Brief description Type Part no. Self-adhesive protective film 2069268 4 pieces, FlexFix bracket, plastic, can be aligned ± 15°, including screw M5, Plastic BEF-1SHABPKU4 2066614 2 pieces, QuickFix bracket, Plastic BEF-3SHABPKU2 2066048 DSC-1205T000025KM0 6030664 Head A: female connector, M12, 5-pin, straight Head B: cable Cable: Power, I/O, drag chain use, PUR, halogen-free, unshielded, 2 m DOL-1205-G02MC 6025906 Head A: female connector, M12, 5-pin, straight Head B: cable Cable: drag chain use, PUR, halogen-free, unshielded, 5 m DOL-1205-G05MC 6025907 Head A: female connector, M12, 5-pin, straight Head B: cable Cable: drag chain use, PUR, halogen-free, unshielded, 10 m DOL-1205-G10MC 6025908 Head A: female connector, M12, 5-pin, straight Head B: cable Cable: drag chain use, PUR, halogen-free, unshielded, 20 m DOL-1205-G20MC 6050247 Head A: female connector, M12, 5-pin, straight Head B: cable Cable: drag chain use, PUR, halogen-free, unshielded, 30 m DOL-1205-G30MC 6050248 Head A: female connector, M12, 5-pin, angled Head B: cable Cable: Power, I/O, drag chain use, PUR, halogen-free, unshielded, 2 m DOL-1205-W02MC 6025909 Head A: female connector, M12, 5-pin, angled Head B: cable Cable: drag chain use, PUR, halogen-free, unshielded, 5 m DOL-1205-W05MC 6025910 Head A: female connector, M12, 5-pin, angled Head B: cable Cable: drag chain use, PUR, halogen-free, unshielded, 10 m DOL-1205-W10MC 6025911 Head A: female connector, M12, 5-pin, straight, A-coding Head B: male connector, M12, 5-pin, straight, A-coding Cable: digital I/Os, drag chain use, PUR, halogen-free, unshielded, 5 m DSL-1205-G05MC 6029282 Head A: female connector, M12, 5-pin, straight, A-coding Head B: male connector, M12, 5-pin, straight, A-coding Cable: digital I/Os, drag chain use, PUR, halogen-free, unshielded, 10 m DSL-1205-G10MC 6038954 Head A: female connector, M12, 5-pin, straight, A-coding Head B: male connector, M12, 5-pin, straight, A-coding Cable: digital I/Os, drag chain use, PUR, halogen-free, unshielded, 15 m DSL-1205-G15MC 6038956 Device protection (mechanical) 1 piece, self-adhesive protective film for the front screen (protects sensors from damage by flying sparks and welding beads) Terminal and alignment brackets Adapters and distributors CANopen, T-piece H I J K L M N O P Q R S T Plug connectors and cables 6 OPTO-ELECTRONIC PROTECTIVE DEVICES | SICK Online data sheet | 2017-08-21 16:38:06 Subject to change without notice C4C-SA12030A10000, C4C-EA12030A10000 | deTec4 Core SAFETY LIGHT CURTAINS Brief description Type Part no. Laser alignment aid for various sensors, laser class 2 (IEC 60825). Do not look into the beam! AR60 1015741 AR60 adapter, deTec, MLG-2 4070854 Test rod 30 mm 2022602 Alignment aids Adapter AR60 for deTec4, deTec2 and MLG-2 Test and monitoring tools 30 mm diameter 2017-08-21 16:38:06 | Online data sheet Subject to change without notice OPTO-ELECTRONIC PROTECTIVE DEVICES | SICK 7 Online data sheet SICK at a glance SICK is one of the leading manufacturers of intelligent sensors and sensor solutions for industrial applications. A unique range of products and services creates the perfect basis for controlling processes securely and efficiently, protecting individuals from accidents and preventing damage to the environment. We have extensive experience in a wide range of industries and understand their processes and requirements. With intelligent sensors, we can deliver exactly what our customers need. In application centers in Europe, Asia and North America, system solutions are tested and optimized in accordance with customer specifications. All this makes us a reliable supplier and development partner. Comprehensive services complete our offering: SICK LifeTime Services provide support throughout the machine life cycle and ensure safety and productivity. For us, that is “Sensor Intelligence.” Worldwide presence: Contacts and other locations – www.sick.com SICK AG | Waldkirch | Germany | www.sick.com