DB Lectro BTP5-99BLCT-B5-P/W Prolite 5w smd star Datasheet

ProLite 5W SMD Star
BTP5-99XXCT-XX-X/W
Package Dimension
Features
Highest Lumen Per Watt
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
Long Operational Life
White Housing
Superior ESD Protection
Instant Light (less than 100ns)
Compatible to Luxeon’s “Lambertian”
True SMD Emitter
IR Reflow Soldering Process
Note: Lens is low dome profile
Tolerance:
Applications
± see spec
Unit: mm
Accent Light/Down Light/Spot Light
Automotive Exterior/Interior Light
Large Area LCD Backlights
Marine/Miner’s Lighting
Portable Flashlight/ General Lighting
ƒ
ƒ
ƒ
ƒ
ƒ
Optical Characteristics at TJ=25ºC, IF=700mA
PART NUMBER
Emitting
Color
LED Chip
Material
Lens
Color
Wavelength (nm)
CCT (K) Range
Drive
Luminous
VIEW
Voltage
Flux (lm)
ANGLE
@ 700mA
@700mA
2θ1/2
(deg)
Min
Max
Typ.
Typ.
Water Clear
620
645
4.40V
120
Water Clear
610
620
4.40V
144
BTP5-99NRCT-XX-X/W
Normal Red
BTP5-99AMCT-XX-X/W
Amber
BTP5-99YECT-XX-X/W
Yellow
Water Clear
585
600
4.40V
112
BTP5-99BLCT-XX-X/W
Blue
Water Clear
460
490
7.10V
40
BTP5-99PGCT-XX-X/W
Green
Water Clear
520
545
7.10V
120
Water Clear
2800K
3800K
7.10V
96
Water Clear
5000K
8000K
7.10V
100
BTP5-99WWCT-XX-X/W
Warm White
BTP5-99WHCT-XX-X/W
White
AlInGaP
AlInGaN
140
Notes:
1)
Picture for illustration purpose only.
Please refer to outline dimension for actual package size.
2)
Flux is measured with the accuracy of ±15%. Please refer to Flux Selection Guide
3)
CCT is measured with the accuracy of ± 400K. Please refer to CCT Selection Guide
4)
VF is measured with the accuracy of ± 0.15V. Please refer to VF Selection Guide
Part No.: BTP5-99XXCT-XX-X/W
Rev1.2005
Page 1 of 7
DB LECTRO Inc. 3600 boul. Matte suite i Brossard Qc J4Y-2Z2 tel:(450)-444-1424 fax:(450)-444-4714 www.dbelctro.com
ProLite 5W SMD Star
BTP5-99XXCT-XX-X/W
Absolute Maximum Ratings at TJ=25ºC
Parameter
Red/Amber/Yellow
White/Blue/Green
4.35
5.59
700
700
1000
1000
Average Forward Current (mA)
700
700
Reverse Voltage (V)
5
5
Reverse Current (uA)
50
50
16,000
16,000
120
135
Thermal Resistance Junction to Board (°C/W)
13
13
Temperature Coefficient of VF (mV/°C)
-2
-2
Storage Temperature (°C)
-40 to +105
-40 to +105
Operating Temperature (°C)
-40 to +105
-40 to +105
Power Dissipation (W)
[1]
DC Forward Current (mA)
Peak Pulsed Forward Current (mA)
[4]
ESD Sensitivity (V) [2]
LED Junction Temperature at 350mA (°C)
[3]
Lead Soldering Temperature (°C)[4]
260°C for 5 seconds max 260°C for 5 seconds max
Application Notes:
1.
Proper forward current must be observed to maintain the junction temperature below maximum
rating
2.
Although all products listed are class two ESD protection (+/- 16KV by HBM mode), care must be
fully taken when handling products
3.
Specification is subjected to change for improvements without notice.
4.
Test conditions: tp≤10us, duty cycle = 0.005
5.
CAUTION: When lighting up, the emitter will become very hot if it is not attached to a heat sink.
Please provide proper heat management to prevent damage to the emitter.
Part No.: BTP5-99XXCT-XX-X/W
Rev1.2005
Page 2 of 7
DB LECTRO Inc. 3600 boul. Matte suite i Brossard Qc J4Y-2Z2 tel:(450)-444-1424 fax:(450)-444-4714 www.dbelctro.com
ProLite 5W SMD Star
BTP5-99XXCT-XX-X/W
CCT, Flux and VF Selection Guide (@TJ=25ºC, IF=700mA)
BTP5-99XXCT-XX-X/W
White Housing
Wavelength Ranks Selection
Color
Blue
Green
Red
Amber
Yellow
Bin
B5
B6
B7
B8
B9
B10
XX
G7
G8
G9
G10
G11
XX
XX
XX
XX
Flux Ranks Selection
λD(nm)
Min
Max
460
465
465
470
470
475
475
480
480
485
485
490
460 – 490
520
525
525
530
530
535
535
540
540
545
520 – 545
620 – 630
610 – 620
585 – 600
Warm
White
White
Bin
00
01
XX
02
03
04
XX
Bin
Flux (lumens)
P
23~30
Q
30~39
R
39~50
X
Default Full Range
T
65~85
U
85~111
V
111~144
W
144~187
X
Default Full Range
Blue
Red
Amber
Yellow
Green
White
VF Ranks Selection
Color
CCT Ranks Selection
Color
Temp
Color
CCT(K)
Min
Max
2800
3300
3300
3800
2800K – 3800K
5000
6000
6000
7000
7000
8000
5000K – 8000K
Red
Amber
Yellow
Warm White
White
Blue
Green
Bin
VF (V)
Min
Max
V12
V13
V14
V15
V16
V17
VXX(Full)
V27
V29
V30
V31
V32
V33
VXX(Full)
3.6
3.8
3.8
4.0
4.0
4.2
4.2
4.4
4.4
4.6
4.6
4.8
3.6~4.8
6.8
7.0
7.0
7.2
7.2
7.4
7.4
7.6
7.6
7.8
7.8
8.0
6.8~8.0
(Please specify on order, otherwise, default full range of VF)
Part No.: BTP5-99XXCT-XX-X/W
Rev1.2005
Page 3 of 7
DB LECTRO Inc. 3600 boul. Matte suite i Brossard Qc J4Y-2Z2 tel:(450)-444-1424 fax:(450)-444-4714 www.dbelctro.com
ProLite 5W SMD Star
BTP5-99XXCT-XX-X/W
Typical Electro-Optical Characteristics Curves
Fig. 1 Forward Current vs Ambient Temperature (Green, Blue and White)
Fig. 2 Forward Current vs Ambient Temperature (Red, Amber and Yellow)
Part No.: BTP5-99XXCT-XX-X/W
Rev1.2005
Page 4 of 7
DB LECTRO Inc. 3600 boul. Matte suite i Brossard Qc J4Y-2Z2 tel:(450)-444-1424 fax:(450)-444-4714 www.dbelctro.com
ProLite 5W SMD Star
BTP5-99XXCT-XX-X/W
Part No.: BTP5-99XXCT-XX-X/W
Rev1.2005
Page 5 of 7
DB LECTRO Inc. 3600 boul. Matte suite i Brossard Qc J4Y-2Z2 tel:(450)-444-1424 fax:(450)-444-4714 www.dbelctro.com
ProLite 5W SMD Star
BTP5-99XXCT-XX-X/W
Typical Electro-Optical Characteristics Curves
Fig. 5a Relative Light Output vs Junction Temperature
Fig. 5b Relative Light Output vs Junction Temperature
Part No.: BTP5-99XXCT-XX-X/W
Rev1.2005
Page 6 of 7
DB LECTRO Inc. 3600 boul. Matte suite i Brossard Qc J4Y-2Z2 tel:(450)-444-1424 fax:(450)-444-4714 www.dbelctro.com
ProLite 5W SMD Star
BTP5-99XXCT-XX-X/W
Relative Intensity(%)
Typical Electro-Optical Characteristics Curves
100
90
80
70
60
50
40
30
20
10
0
-100
-80
-60
-40
-20
0
20
40
60
80
100
Angular Displacement(Degree)
Fig. 6 Typical Radiation Pattern
Other Important Notes
z
The information contained herein is presented only as a Guide for the application of our products.
Brilliance Technologies assumes no responsibility for any infringement of intellectual property or other
rights of the third parties which may result from its use.
z
Brilliance Technologies continually improves the quality of our products.
Nevertheless, semiconductor
devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to
physical stress.
It is the responsible of the customer, when using Brilliance Technologies products, to
comply with the standard of safety in making a safe design for the entire system, and to avoid situations in
which a malfunction or failure of such Brilliance Technologies products cause loss of human life, bodily
injury or damage to property.
z
Brilliance Technologies products listed in this data sheet are intended for usage in general electronics
and/or non-commercial or industrial lighting products. These products are neither intended nor warranted
for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure
of which may cause loss of human life or bodily injury.
z
In developing your design, please ensure that Brilliance Technologies products are used within specified
operating ranges as set forth in the most recent Brilliance Technologies data sheets.
BT-Rev. 1.0B20050120
Specifications are subject to change for improvement without notice.
Copyright © 2003 Brilliance Technologies Co., Ltd. All rights reserved.
Part No.: BTP5-99XXCT-XX-X/W
Rev1.2005
Page 7 of 7
DB LECTRO Inc. 3600 boul. Matte suite i Brossard Qc J4Y-2Z2 tel:(450)-444-1424 fax:(450)-444-4714 www.dbelctro.com
Similar pages