Home > Product Details VAF5 Features Small and compact size Built-in Inrush Current Protection P.C. board mount AC/DC converter Built-in Over Voltage Protection RoHS Compliant Safety Agency Approvals Complies with DEN-AN UL1950, C-UL recognized, TUV approved EMI Compliance FCC-B CISPR22-B EN55022-B VCCI-B Input Voltage [V] Output Wattage [W] DC Output [V/A] VAF503 DC 110 370 AC 85 - 264 3.3 3.3V 1A (peak 1.2A) VAF505 DC 110 370 AC 85 - 264 5 5V 1A (peak 1.2A) VAF512 DC 110 370 AC 85 - 264 5.4 12V 0.45A (peak 0.54A) VAF524 DC 110 370 AC 85 - 264 5.28 24V 0.22A (peak 0.27A) Model EMC Compliance EN61000-4-2 EN61000-4-3 EN61000-4-4 EN61000-4-5 EN61000-4-6 EN61000-4-8 EN61000-4-11 EN55022-B 3 year warranty(refer to Instruction Manual) Ordering information On-board type VAF5 VAF 1 5 2 05 3 1Series name 2Output wattage 3Output voltage R MODEL MAX OUTPUT WATTAGE[W] DC OUTPUT VAF503 3.3 VOLTAGE[V] 3.3 CURRENT[A] 1.0 (Peak 1.2) VAF505 5.0 5 1.0 (Peak 1.2) VAF512 5.4 12 0.45 (Peak 0.54) VAF515 5.25 15 0.35 (Peak 0.42) VAF524 5.28 24 0.22 (Peak 0.27) VAF515 VAF524 78typ 15 0.35 (Peak 0.42) 60max 120max 120max 160max 200max 150max 180max 220max 150max 60max 14.25 - 15.75 81typ 24 0.22 (Peak 0.27) 96max 150max 150max 200max 240max 200max 230max 260max 300max 96max 23.0 - 25.0 SPECIFICATIONS MODEL VOLTAGE[V] CURRENT[A] INPUT FREQUENCY[Hz] ACIN 100V ACIN 200V LEAKAGE CURRENT[mA] EFFICIENCY[%] VOLTAGE[V] *1 CURRENT[A] LINE REGULATION[mV] LOAD REGULATION[mV] 0 to +55C *2 RIPPLE[mVp-p] -10 - 0C *2 Io=100 - 120% *2 0 to +55C *2 OUTPUT RIPPLE NOISE[mVp-p] -10 - 0C *2 Io=100 - 120% *2 TEMPERATURE COEFFICIENT[mV] -10 to +55C *3 DRIFT[mV] OUTPUT VOLTAGE SETTING[V] OUTPUT VOLTAGE ADJUSTMENT RANGE[V] START-UP TIME[ms] HOLD-UP TIME[ms] PROTECTION OVERCURRENT PROTECTION CIRCUIT OVERVOLTAGE PROTECTION INPUT-OUTPUT ISOLATION INPUT-FG OUTPUT-FG OPERATING TEMP.,HUMID.AND ALTITUDE STORAGE TEMP.,HUMID.AND ALTITUDE ENVIRONMENT VIBRATION IMPACT SAFETY AND AGENCY APPROVALS NOISE REGULATIONS CONDUCTED NOISE CASE SIZE/WEIGHT OTHERS COOLING METHOD INRUSH CURRENT[A] VAF ACIN 100V ACIN 200V VAF503 VAF505 VAF512 AC85 - 264 1f or DC110 - 370 0.15typ (Io=100%) 0.10typ (Io=100%) 47 - 440 or DC 15typ (Io=100%) 30typ (Io=100%) 0.5max (60Hz, According to IEC60950 and DEN-AN) 68typ 77typ 78typ 3.3 5 12 1.0 (Peak 1.2) 1.0 (Peak 1.2) 0.45 (Peak 0.54) 20max 20max 48max 40max 40max 100max 80max 80max 120max 140max 140max 160max 180max 180max 200max 120max 120max 150max 160max 160max 180max 200max 200max 220max 100max 50max 120max 20max 20max 48max 3.19 - 3.47 4.90 - 5.30 11.40 - 12.60 Fixed 700max (ACIN 85V, Io=100%) 10typ (ACIN 85V, Io=100%), 20typ (ACIN 100V, Io=100%) Works over 125% of rating and recovers automatically Works over 115% of rating (By zener diode clamping) AC3,000V 1minute, Cutoff current = 10mA, DC500V 50MW min (At Room Temperature) AC2,000V 1minute, Cutoff current = 10mA, DC500V 50MW min (At Room Temperature) AC500V 1minute, Cutoff current = 100mA, DC500V 50MW min (At Room Temperature) -10 to +71C, 20 - 90%RH (Non condensing) (Refer to DERATING CURVE), 3,000m (10,000feet) max -20 to +75C, 20 - 90%RH (Non condensing), 9,000m (30,000feet) max 19.6m/s2 10 - 55Hz, 3minutes period, 60minutes each along X, Y and Z axis (Non operating) 196.1m/s2 11ms, once each X, Y and Z axis (Non operating) UL60950-1, C-UL, EN60950-1, EN50178 Complies with DEN-AN and IEC60950-1 Complies with FCC-B, VCCI-B, CISPR22-B, EN55022-B 32X20X72.5mm (WXHXD) / 30g max Convection *1 Peak load for 10sec. or less in acceptable if the total wattage is less than the rated wattage. *2 This is the value that measured on measuring board with capasitor of 22mF. Measuared by 20MHz oscilloscope or Ripple-Noise meter (Equivalent to KEISOKU-GIKEN: RM101). *3 Drift is the change in DC output for an eight hour period after a half-hour warm-up at 25C, with the input voltage held constant at the rated input/output. G-144 VAF5 External view Recommended size for processing PCB (TOP VIEW) 72.5 65.5 3.5 5-º1.3 49.5 49.5 Outline AC(N) C(N) 27 -V 10 C16 12 32 Name Plate 29.5 +V 12 27 FG 10 AC(L) 2.5 2.5 (TOP VIEW) 3.5 65.5 Input/Output Pin bottom cover º1.7 bottom cover 4 5-º1.0 (stopper º 1.7) 4 20 (21 max.) (15.5) ¶ Dimension: mm ¶ Unit: 2mm º1.0 ¶ Weight: 30g or Less ¶Tolerance: ±0.5 ¶PCB material: CEM-3 ¶PCB thickness: t=1.0 ¶Pin material: CPW with solder plated ¶Bottom cover material: Bake PL 1256 (Black) ¶Recommended hole dia. to PCB: º1.3 Performance data ¡STATIC CHARACTERISTICS (VAF512) ¡RISE TIME (VAF512) AC 85V AC170V AC264V 12.20 OUTPUT VOLTAGE 5V/DIV 12.30 12.10 DC Output 12.00 VAF ACIN 85V Io=100% AC Input 11.90 0 0.2 0.4 50ms/DIV 0.6 OUTPUT CURRENT ¡OVERCURRENT CHARACTERISTICS (VAF512) ¡DERATING CURVE 14 100 10 75 LOAD FACTOR OUTPUT VOLTAGE 12 8 6 AC 85V AC170V AC264V 4 25 2 0 0.5 1.0 OUTPUT CURRENT 1.5 2.0 0 -10 0 10 20 30 40 50 60 71 AMBIENT TEMPERATURE G-145