AZETTLER AZ830P2-2C-5DSSE Polarized dip relay bistable (latching) Datasheet

AZ830P
POLARIZED DIP RELAY
BISTABLE (LATCHING)
FEATURES
•
•
•
•
•
•
•
•
•
High sensitivity, 86 mW pickup
Low profile DIP package
Meets FCC Part 68.302 1500 V lightning surge
Meets FCC Part 68.304 1000 V dielectric
Epoxy sealed for automatic wave soldering and cleaning
DC coils to 48 VDC
High switching capacity, 60 W, 125 VA
Fits standard 16 pin IC socket
UL file E43203
GENERAL DATA
Life Expectancy
Mechanical
CONTACTS
Electrical
Arrangement
DPDT (2 Form C)
Bifurcated crossbar contacts
Ratings
Resistive load:
Max. switched power: 60 W or 125 VA
Max. switched current: 2 A
Max. switched voltage: 150 VDC or 300 VAC
Rated Load
UL
2 A at 30 VDC
1 A at 120 VAC
Material
Silver alloy, gold clad.
Resistance
< 50 milliohms initially
3 ms at nominal coil voltage
Reset Time (typical)
3.5 ms at nominal coil voltage
Capacitance
Contact to contact: 1.0 pF
Contact set to contact: 1.0 pF
Contact to coil: 2.0 pF
Bounce (typical)
At 10 mA contact current
1.5 ms at operate N.O. side
2.5 ms at operate N.C. side
Dielectric Strength
(at sea level)
1500 Vrms contact to coil
1000 Vrms between contact sets
1000 Vrms across contacts
Meets FCC Part 68.302 lightning surge
Meets FCC Part 68.304 V dielectric
Insulation Resistance
1000 megohms min. at 20°C, 500 VDC,
50% RH
Ambient Temperature
Operating
At nominal coil voltage
Standard: -40°C (-40°F) to 85°C (185°F)
Sensitive: -40°C (-40°F) to 95°C (203°F)
Ultra-Sensitive: 40°C (-40°F) to 100°C (212°F)
All: -40°C (-40°F) to 115°C (239°F)
Power
Max. Continuous
Dissipation
Temperature Rise
Temperature
Standard coil: 176 mW
Sensitive coil: 90 mW
Ultra-Sensitive coil: 86 mW
1.2 W at 20°C (68°F) ambient
0.9 W at 40°C (104°F) ambient
Standard: 38°C (68°F) at nominal coil voltage
Sensitive: 21°C (38°F) at nominal coil voltage
Ultra-Sensitive: 16°C (29°F) at nominal coil voltage
Max. 115°C (239°F)
NOTES
1.
2.
3.
4.
All values at 20°C (68°F).
Relay may pull in with less than “Must Operate” value.
Relay has fixed coil polarity.
Relay adjustment may be affected if undue pressure is exerted
on relay case.
5. For complete isolation between the relay’s magnetic fields, it is
recommended that a .197" (5.0 mm) space be provided between
adjacent relays.
6. Specifications subject to change without notice.
1 x 105 at 2 A, 30 VDC or 1 A, 125 VAC
2 x 106 at 1 A, 30 VDC or .5 A, 125 VAC
Set Time (typical)
COIL (Polarized)
At Pickup Voltage
(typical)
Minimum operations
1 x 108
Storage
Vibration
0.062" DA at 10–55 Hz
Shock
40 g
Enclosure
P.B.T. polyester
Terminals
Tinned copper alloy, P.C.
Max. Solder Temp.
270°C (518°F)
Max. Solder Time
5 seconds
Max. Solvent Temp.
80°C (176°F)
Max. Immersion Time
30 seconds
Weight
5 grams
7/17/07W
AZ830P
RELAY ORDERING DATA
COIL SPECIFICATIONS
STANDARD COIL
Nominal
Max.
Coil
Coil
Continuous Resistance
VDC
VDC
± 10%
3
4.5
25
5
7.5
Set
Reset
VDC
2.1
69.4
ORDER NUMBER*
Maximum Switching Capacity
AZ830P2–2C–3DE
3.5
AZ830P2–2C–5DE
10.0
9.0
8.0
7.0
6.0
5.0
4.0
6
9.0
100
4.2
AZ830P2–2C–6DE
9
13.5
225
6.3
AZ830P2–2C–9DE
12
18.0
400
8.4
AZ830P2–2C–12DE
24
36.0
1600
16.8
AZ830P2–2C–24DE
48
72.0
6400
33.6
AZ830P2–2C–48DE
3.0
Current
2.0
SENSITIVE COIL
AC Resistive Load
1.0
.9
.8
.7
.6
.5
3
6.4
50
2.1
AZ830P2–2C–3DSE
5
10.6
139
3.5
AZ830P2–2C–5DSE
.3
6
12.7
200
4.2
AZ830P2–2C–6DSE
.2
9
19.1
450
6.3
AZ830P2–2C–9DSE
12
25.5
800
8.4
AZ830P2–2C–12DSE
24
50.9
3200
16.8
AZ830P2–2C–24DSE
DC Resistive Load
1000
400
500
600
700
800
900
300
200
100
50
60
70
80
90
40
30
20
.1
10
.4
Voltage
ULTRA-SENSITIVE COIL
3
7.3
2.4
AZ830P2–2C–3DSSE
5
12.3
185
66.7
4.0
AZ830P2–2C–5DSSE
6
14.7
267
4.8
AZ830P2–2C–6DSSE
9
22.0
600
7.2
AZ830P2–2C–9DSSE
12
29.4
1067
9.6
AZ830P2–2C–12DSSE
24
58.8
4267
19.2
AZ830P2–2C–24DSSE
* Add suffix “R” to indicate reversed polarity.
MECHANICAL DATA
PC BOARD LAYOUT
.788
(20.0)
.390
(9.9)
.386
.366 (9.8)
(9.3)
.044
(1.1)
.100
(2.54)
.200
(5.07)
.200
(5.07)
.200
(5.07)
0.03 DIA
(0.8)
(10 HOLES)
.138
(3.5)
.044
(1.1) REF
.044
(1.1) REF
.012 ± .005
(0.3 ± 0.13)
TYP
(.024 ± .005)
(0.6 ± 0.13)
TYP
0.1
(2.54)
Viewed toward terminals
TWO COIL LATCHING
WATCH FOR POLARITY
1
2
+
–
16
Set
WIRING DIAGRAM
4
6
8
13
11
9
+
–
15
Diagrams show the
“reset” position before
energized with polarity
as shown
Viewed toward terminals
Reset
Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010"
7/17/07W
Similar pages