IPC PSU FSP700-80UEPB DESCRIPTION FSP700-80UEPB is an industrial level of switching power supply. The power supply comes to offer the total power capacity up to 700 Watts, and uses unique active PFC (Power Factor C orrection) circuit design with its high-load electrical components, makes it to be perfectly used in an industrial environment. In addition, with its full range of input and output electrical features, the power supply is ideally the best choice for server, workstation, communication or any other automation applications to use. The product also complies with the latest safety and EMC standards, which is perfectly to meet various regulations worldwide. SAFETY STANDARD APPAOVAL APPLICATION OUTPUT SPECIFICATION For standard, advanced server, NAS, storage, and industrial power system. Hold up Time: FEATURES 80 Plus Platinum Low Ripple & Noise Output over voltage protection Short circuit protection on all outputs Resettable power shut down INTERNAL 4 cm fan Four +12V output (+12V/1,+12V/2, +12V/3, +12V/4) 100% burn-in under high ambient temperature(50℃) Vacuum-impregnated transformer MTBF:100K hours at 25℃ 100% Hi-pot tested Line input fuse protection Ouput Voltage Regulation: Output Rise Time: Ripple & Noise: W ATTAGE Wattage: 700W DIMENSION Dimension: 240mm(L) x 100mm(W) x 40.5mm(H) PRODUCT HIGHLIGHT Efficiency Level: Altitude: PMBus: ENVIRONMENTAL SPECIFICATION 80 Plus Platinum 5000M v1.2 TEMP.Range: MTBF: INPUT SPECIFICATION Input Range: Input Frequency: Input Current: 115V/60Hz 16mSec. Minimum@100% Load, 230V/50Hz 16mSec. Minimum,@100% Load +3.3Vdc output : +3.5 Vdc minimum, + 4.5Vdc maximum +5Vdc output : +5.5 Vdc minimum, + 6.82Vdc maximum +12Vdc output : +13.4 Vdc minimum, + 15.6Vdc maximum 115V-rms/230V-rms 5V 20ms Maximum 3.3V:50mV p-p 5V:50mV p-p 12V1:120mV p-p 12V2:120mV p-p 12V3:120mV p-p 12V4:120mV p-p -12V:120mV p-p 5Vsb:50mV p-p 90-264 Vac 47-63 Hz 115V@ 12.0 Amps-rms maximum 230V@ 6.0 Amps-rms maximum Storage Temperature: 20°C to + 80℃ The power supply have a minimum predicted MTBF(MIL-HDBK-217) of 100,000 hours of continuous operation at 25℃, maximum-output load, and nominal AC inout voltage GENERAL SPECIFICATION Effciency: Voltage Regulation: 92% 230VAC +3.3V, +12V, +5V, +5SB: ±5% -12V: ±10% *Output Voltage and C urrent Rating +3.3V Ripple-Noise(R-P) mV 50mV Regulation Load % ±5% Output Max.(A) 25A Output Min.(A) 0.1A +5V 50mV ±5% 30A 1A +12V1 120mV ±5% 16A 1A +12V2 120mV ±5% 16A 1A +12V3 120mV ±5% 16A 1A +12V4 120mV ±5% 16A 1A -12V 120mV ±10% 0.5A 0A +5Vsb 50mV ±5% 4A 0A NOTES C ombined 3.3V and 5 power shall not exceed 170W. Maximum combined current for the 12V outputs shall be 56A. Outputs shall bypassed at the connector with a 0.1uF ceramic disk capacitor and a 10uF electrolytic capacitor to simulate system loading. Maximum continuous total DC output power should not exceed 700W This content is subject to change, please refer to specification for m ore detail. FSP reserve the right to change the content without prior notice