DILABS B096QC2S Frequency stable over temperature Datasheet

8 to 12 GHz Bandpass Filter
AFL05196
Features
▪ Small Size
▪ Fully Shielded Component
▪ Frequency Stable over Temperature
Description
Surface mount, fully shielded, thin film filter designed for use on PCB 812 mils thick with permitivity of 3.0-3.8.
Applications include X-Band, Radar and Military Communications.
Electrical Specifications
10000 MHz
Center Frequency
8000 - 12000 MHz
Passband
Insertion Loss (@Fc)
2.5 dB
@ 25C
3.0 dB
-40C to +85C
VSWR
2.0:1
8000 MHz to 12000 MHz*
Rejection
40 dB
dc to 6000 MHz
40 dB
14000 MHz to 18000 MHz
-55 to +125 degree C
Usable Temp Range
*50 Ohm System
Mechanical
Footprint LxW
0.400 x 0.180
inch
[10.16 x 4.57]
mm
0.1 [2.54]
Height
Inch [mm]
Typical Performance
0
-5
-10
-15
-20
Magnitude in dB
-25
-30
-35
-40
Frequency
Response
-45
-50
-55
-60
-65
-70
4000
5000
6000
7000
8000
9000
10000
11000
12000
13000
Frequency in MHz
14000
15000
16000
17000
18000
19000
20000
Catalog specifications subject to change without notice
1of3
AFL05196
June2013 Revision B
Wide Band Performance
-10
-10
-20
-20
-30
-30
-40
-50
8000
10000
12000
14000
Frequency in MHz
16000
18000
-70
6000
20000
10000
12000
Frequency in MHz
14000
16000
Passband Response
-0.5
-1
1.5
Magnitude in dB
Group Delay - nsec
8000
0
2.0
1.0
0.5
2of3
-50
Group Delay
2.5
0.0
7000
-40
-60
-60
-70
6000
Narrow Band Performance
0
Magnitude in dB
Magnitude in dB
0
-1.5
-2
-2.5
8000
9000
10000
11000
Frequency - MHz
12000
13000
-3
7000
AFL05196
8000
9000
10000
11000
Frequency (MHz)
12000
13000
June2013 Revision B
Mechanical Drawing
All units in inches
Mounting Information
PCB ground pattern length and width can be 0.002-0.003 inches larger than filter footprint.
Dimensions of filter launch and PCB launch pattern should be closely matched.
It is suggested that PCB ground metal be pulled back from RF I/O trace to account for component
alignment tolerance. Ground via depth and spacing should be set so as not to create any
resonances at the frequency of operation.
Reference SMT Filter Mounting application note for additional mounting information.
Dielectric Laboratories, Inc.
2777 Route 20 East, Cazenovia, NY 13035 USA
Phone: (315) 655-8710
Fax: (315)655-0445
Email: [email protected]
3of3
AFL05196
June2013 Revision B
Similar pages