Présente / Presents: DB LECTRO Inc. 3755 Place Java, Suite 140, Brossard, Québec, J4Y 0E4, Canada - T: 1-450-444-1424 / F: 1-450-444-4714 / www.dblectro.com NG8N NHG RELAYS Operation condition NG8N Patent No.:03255320.X 200520012716.X 14.3 7.5 13.8 Features Small size, light weight. Low coil consumption. Switching capacity up to 25A motor lock load High performance PCB relay Suitable for household electrical appliance, automation system Insulation Resistance 100M Dielectric Strength Between contacts Between contact and coil min (at 500VDC) 50Hz 500V 50Hz 1000V Item 6 of IEC255-5 Item 6 of IEC255-5 Shock resistance 98m/s2 IEC68-2-27 Test Ea Vibration resistance 10Hz~500Hz Acceleration 43.1m/s2 IEC68-2-6 Test Fc Terminals strength Solderability Ambient Temperature Relative Humidity Mass 5N 235 2 3 -40~105 85% (at 40 ) 4.1g IEC68-2-21 Test Ua1 IEC68-2-20 Test Ta method 1 11ms 0.5s IEC68-2-3 Test Ca Qualification inspection: Perform the qualification test as specified in the table Ordering Information 1S C DC12V 0.80 1 2 3 4 5 Dimensions 1 Part number NG8N 2 Sensitivity 1:Standard 1S:High sensitivity 1L:High temperature 1H:High temperature/High sensitivity mm /inch 3 Contact arrangement C:1C 4 Coil rated voltage(V) DC:12 5 Coil power consumption 0.64:0.64W 0.80:0.80W Max. 0.543max. 0.138 1C SPDT(B-M) AgSnO 2 25A motor lock (14VDC) 480W 16VDC 250mV (at 10A 105 106 0.047 0.035 Dimensions Rated 1 12 2- 1.0 0.039 Coil resistance 10% Pickup voltage VDC(max) Max. 16 225 7.2 Release voltage VDC(min) (8.3% of rated voltage) Coil power consumption W 1.0 0.64 Operate Time ms Release Time ms 0.157 1S 12 16 180 6.5 1.0 0.80 1L 12 16 225 7.2 1.0 0.64 IH 12 16 180 6.5 1.0 0.80 3- 1.6 0.063 0.189 Model 0.024 0.012 Max. Switching Current:30A Item 3.12 of IEC255-7 Item 3.30 of IEC255-7 Item 3.31 of IEC255-7 Coil Parameter Coil voltage VDC Max. 0.295max. Max. 0.563max. Contact Data Contact Arrangement Contact Material Contact Current Max. Switching Power Max. Switching Voltage Contact Resistance or Voltage drop Operation life Electrical Mechanical of IEC255-19-1 and minimum sample size 24. 0.016 NG8N Item 7 of IEC255-5 0.331 Wiring diagram (Bottom view) Mounting (Bottom view) 10 5 NOTES 1).Dimensions are in millimeters. 2).Inch equivalents are given for general information only. CAUTION: 1.The use of any coil voltage less than the rated coil voltage will compromise the operation of the relay. 2.Pickup and release voltage are for test purposes only and are not to be used as design criteria. Ningbo Huaguan Relay Corporation LTD.