SPECIFICATION Supplier : Samsung electro-mechanics Product : Multi-layer Ceramic Capacitor (Reference sheet) Samsung P/N : CL03C180JA3ANNC Description : CAP, 18㎊, 25V, ±5%, C0G, 0201 A. Samsung Part Number ① Series ② Size ③ Dielectric ④ Capacitance ⑤ Capacitance tolerance ⑥ Rated Voltage ⑦ Thickness CL 03 C 180 J A 3 A N N C ① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ ⑩ ⑪ Samsung Multi-layer Ceramic Capacitor 0201 (inch code) L: 0.6 ± 0.03 C0G 18 ㎊ ±5 % 25 V 0.3 ± 0.03 mm mm ⑧ Inner electrode Termination Plating ⑨ Product ⑩ Special ⑪ Packaging W: 0.3 ± 0.03 mm Pd Ag Sn 100% (Pb Free) Normal Reserved for future use Cardboard Type, 7" reel B. Samsung Reliability Test and Judgement condition Performance Capacitance Q Insulation Resistance Appearance Withstanding Voltage Temperature Characteristics Adhesive Strength of Termination Bending Strength Solderability Test condition Within specified tolerance 760 min 1㎒±10% 0.5~5Vrms 10,000Mohm or 500Mohm㎌ Whichever is Smaller No abnormal exterior appearance No dielectric breakdown or mechanical breakdown C0G Rated Voltage 60~120 sec. Microscope (10) 300% of the rated voltage (From -55℃ to 125℃, Capacitance change should be within ±30PPM/℃) No peeling shall be occur on the 200gF, for 10±1 sec. terminal electrode Capacitance change : Bending to the limit (1mm) with 1.0mm/sec. within ±5% or ±0.5㎊ whichever is larger More than 75% of terminal surface SnAg3.0Cu0.5 solder is to be soldered newly 245±5℃, 3±0.3sec. (preheating : 80~120℃ for 10~30sec.) Resistance to Soldering heat Capacitance change : within ±2.5% or ±0.25㎊ whichever is larger Tan δ, IR : initial spec. Solder pot : 270±5℃, 10±1sec. Performance Vibration Test Moisture Resistance High Temperature Resistance Temperature Cycling Capacitance change : Test condition Amplitude : 1.5mm within ±2.5% or ±0.25㎊ whichever is larger From 10㎐ to 55㎐ (return : 1min.) Tan δ, IR : initial spec. 2hours 3 direction (x, y, z) Capacitance change : With rated voltage within ±7.5% or ±0.75㎊ whichever is larger 40±2℃, 90~95%RH, 500+12/-0hrs Q: 160 min IR : 500Mohm or 25Mohm ㎌ Whichever is Smaller Capacitance change : With 200% of the rated voltage Max. operating temperature within ±3% or ±0.3㎊ whichever is larger Q: 320 min 1000+48/-0hrs IR : 1000Mohm or 50Mohm ㎌ Whichever is Smaller Capacitance change : 1 cycle condition within ±2.5% or ±0.25㎊ whichever is larger Min. operating temperature → Tan δ, IR : initial spec. Max. operating temperature → → 5 cycle test C. Recommended Soldering method : Reflow ( Reflow Peak Temperature : 260+0/-5℃, 10sec. Max ) Product specifications included in the specifications are effective as of March 1 1, 2013 2013. Please be advised that they are standard product specifications for reference only. We may change, modify or discontinue the product specifications without notice at any time. So, you need to approve the product specifications before placing an order. Should you have any question regarding the product specifications, please contact our sales personnel or application engineers. 25℃ 25℃