DC Common Mode Choke Coil <SMD Type:CPFC Series> Type: CPFC54 ◆ Product Description ・9.5×5.65mm Max.(L×W), 4.90mm Max. Height . ◆ Feature ・Ideally used in CAN BUS ,AV,OA equipment. ・RoHS Compliance. ◆ Dimensions (mm) 9.50 Max. 4.90 Max. 5.50 Ref. 2 3 ＊ Dimensions without tolerance are approx. ＊ Dimension does not include solder used on coil. ＊ Pin pitch shall be measured at the root of terminal. ◆ Land Pattern (mm) 3 2 2.54 4 0.50×0.30 1 5.65 Max. Pin 1 1 4 Adhesive ◆ Schematics (Bottom) 1 4 2 3 1.2 2.54 2.9 7.3 Please refer to the sales offices on our website for a representative near you www.sumida.com 1/2 DC Common Mode Choke Coil <SMD Type:CPFC Series> Type: CPFC54 ◆ Specification Inductance (µH) LS(nH)Typ. 1-4(2+3 short) (1-4) or (2-3) ※2 ※1 IR(mA)1-2 (3+4short) ※3 D.C.R(mΩ) Typ. (at 20℃) Hipot DC 2s 0.5mA 50 900 100 250 11±30% 50 700 120 250 250C 25±30% 150 700 130 250 CPFC54-250S 250S 25±30% 1500 700 130 250 CPFC54-510C 510C 51±30% 200 600 160 250 CPFC54-510S 510S 51±30% 2000 600 160 250 CPFC54-101C 101C 100±30% 200 500 230 250 CPFC54-471C 471C 470±30% 200 500 200 750 CPFC54-102C 102C 1000-30% 250 500 200 750 CPFC54-222C 222C 2200 -30% +50% 250 400 400 750 CPFC54-472C 472C 4700 -30% +50% 300 200 650 750 Part Name Stamp CPFC54-050C 050C 5±30% CPFC54-110C 110C CPFC54-250C +50% ※1、※2 Measuring condition 100kHz, 0.1V ※3 . IR:DC current when temperature of coil increased up to 40℃.(Ta=20℃) Please refer to the sales offices on our website for a representative near you www.sumida.com 2/2