MKP 1840 M Vishay Roederstein AC and Pulse Metallized Polypropylene Film Capacitors MKP Radial Potted Type l max. FEATURES w max. Marking h max. 5 mm to 37.5 mm lead pitch. Supplied loose in box, taped on reel and ammopack. RoHS compliant 0.6 -1 ± 0.4 Pitch ± 0.4 6 ENCAPSULATION Plastic case, epoxy resin sealed, flame retardant UL-class 94 V-0 Ø 0.8 CLIMATIC TESTING CLASS ACC. TO EN 60068-1 Dimensions in millimeters 55/100/56 LEAD DIAMETER dt (mm) W (mm) PITCH (mm) 0.5 ± 0.05 0.6 ± 0.06 0.8 ± 0.08 1.0 ± 0.1 < 16 ≥ 16.5 5 7.5 to 10 15 to 37.5 15 to 37.5 CAPACITANCE RANGE 1000 pF to 6.8 µF CAPACITANCE TOLERANCE ± 5 % , ± 2 % , ± 2.5 % APPLICATIONS High frequency and pulse operations. Deflection circuits in TV-sets (S-correction), SMPS, loudspeaker crossover networks, electronic ballast, storage, filter, timing and sample and hold circuits. LEADS Tinned wire MAXIMUM APPLICATION TEMPERATURE 100 °C REFERENCE STANDARDS IEC 60384-16 DETAIL SPECIFICATION MARKING For more detailed data and test requirements, contact: [email protected] C-value; tolerance; rated voltage; manufacturer’s type; code for dielectric material; manufacturer location; manufacturer’s logo; year and week DIELECTRIC Polypropylene film ELECTRODES Metallized CONSTRUCTION Mono and internal series construction RATED DC VOLTAGES 250 V, 400 V, 630 V, 1000 V RATED AC VOLTAGES 160 V, 220 V, 250 V, 400 V, 500 V Document Number: 26018 Revision: 01-Jul-10 For technical questions, contact: [email protected] www.vishay.com 147 MKP 1840 M Vishay Roederstein AC and Pulse Metallized Polypropylene Film Capacitors MKP Radial Potted Type COMPOSITION OF CATALOG NUMBER CAPACITANCE (numerically) MULTIPLIER (nF) 0.1 2 Example: 1 3 410 = 100 nF 10 4 100 5 MKP 1840 X XX 40 4 TYPE CONSTRUCTION M X Mini Version 2M for 630 V/400 VAC METALLIZED POLYPROPYLENE PACKAGING VOLTAGE (VDC) 25 = 250 VDC Bulk (lt: 6.0 mm) TOLERANCE G Ammopack 40 = 400 VDC 2 ±2% 63 = 630 VDC 3 ± 2.5 % V Reel (pitch: 22.5 mm to 27.5 mm) ±5% W Reel (pitch: 5.0 mm to 15.0 mm) 10 = 1000 V 4 Note For detailed tape specifications refer to “Packaging Information” www.vishay.com/doc?28139 or end of catalog SPECIFIC REFERENCE DATA DESCRIPTION Tangent of loss angle: C ≤ 0.1 µF 0.1 µF < C ≤ 1.0 µF C > 1.0 µF Pitch (mm) 4 x 10-4 4 x 10-4 10 x 10-4 400 VDC 250 VDC 540 360 7.5 215 325 10 150 240 15 90 135 22.5 55 80 27.5 40 65 37.5 30 45 R between leads, for C ≤ 1.0 µF at 100 V, 1 min RC between leads, for C > 1.0 µF at 100 V, 1 min R between leads and case, 100 V, 1 min Withstanding (DC) voltage (cut off current 10 mA) rise time 100 V/s Withstanding (DC) voltage between leads and case Maximum application temperature 5 www.vishay.com 148 VALUE at 10 kHz at 1 kHz at 100 kHz 6 x 10-4 10 x 10-4 Maximum pulse rise time (dU/dt)R [V/µs] 630 VDC 1080 For technical questions, contact: [email protected] 510 340 185 110 85 60 40 x 10-4 1000 VDC - 1365 680 370 285 195 > 100 000 MΩ > 100 000 s > 30 000 MΩ 1.6 x URdc, 1 min 500 V, 1 min 100 °C Document Number: 26018 Revision: 01-Jul-10 MKP 1840 M AC and Pulse Metallized Polypropylene Film Capacitors Vishay Roederstein MKP Radial Potted Type METALLIZED POLYPROPYLENE FILM CAPACITOR, MINI VERSION (M) CAPACITANCE CAPACITANCE CODE 1000 pF 1500 pF 2200 pF 3300 pF 4700 pF 6800 pF 0.01 µF 0.015 µF 0.022 µF 0.033 µF 0.047 µF 0.068 µF 0.10 µF 0.15 µF 0.22 µF 0.33 µF 0.47 µF 0.68 µF 1.0 µF 1.5 µF 2.2 µF 3.3 µF 4.7 µF 6.8 µF CAPACITANCE -210 -215 -222 -233 -247 -268 -310 -315 -322 -333 -347 -368 -410 -415 -422 -433 -447 -468 -510 -515 -522 -533 -547 -568 VOLTAGE CODE 40 400 VDC/220 VAC (2) VOLTAGE CODE 25 250 VDC/160 VAC w (mm) 3.0 3.0 3.5 3.5 4.0 4.0 5.0 5.5 6.5 6.5 7.5 8.5 8.5 10.5 11.0 13.5 15.0 14.5 CAPACITANCE CODE h (mm) 6.5 6.5 8.5 8.5 9.0 9.0 10.5 10.5 11.5 12.5 13.5 14.5 16.5 18.5 21.0 23.5 24.5 24.5 l (mm) 7.5 7.5 7.5 7.5 10.0 10.0 10.3 13.0 13.0 18.0 18.0 18.0 16.5 26.5 26.5 31.5 31.5 41.5 PITCH (mm) 5.0 5.0 5.0 5.0 7.5 7.5 7.5 10.0 10.0 15.0 15.0 15.0 22.5 22.5 22.5 27.5 27.5 37.5 w (mm) 3.0 3.5 3.0 4.0 4.5 5.0 5.7 5.5 6.0 7.5 8.5 7.5 10.5 11.0 13.5 15.0 18.0 18.0 20.0 l (mm) 7.5 7.5 10.0 10.0 10.3 10.3 10.3 18.0 18.0 18.0 18.0 26.5 26.5 26.5 31.5 31.5 31.5 41.5 42.5 PITCH (mm) 5.0 5.0 7.5 7.5 7.5 7.5 7.5 15.0 15.0 15.0 15.0 22.5 22.5 22.5 27.5 27.5 27.5 37.5 37.5 VOLTAGE CODE 63 630 VDC/400 VAC (2) w (mm) 4.5 5.5 6.5 5.5 6.5 7.5 6.5 7.5 8.5 11.0 11.0 13.5 16.5 - h (mm) 9.5 10.5 11.5 10.5 12.5 13.5 14.5 15.5 16.5 21.0 21.0 23.5 29.5 - l (mm) 13.0 13.0 13.0 18.0 18.0 18.0 26.5 26.5 26.5 26.5 31.0 31.5 31.5 - 1000 pF -210 1500 pF -215 2200 pF -222 3300 pF -233 4700 pF -247 6800 pF -268 0.01 µF -310 0.015 µF -315 0.022 µF -322 0.033 µF -333 0.047 µF -347 0.068 µF -368 0.10 µF -410 0.15 µF -415 0.22 µF -422 0.33 µF -433 0.47 µF -447 0.68 µF -468 1.0 µF -510 1.5 µF -515 Notes (1) Ordering code -2M (e.g. MKP 1840 410 635-2M) (2) Not suitable for mains applications • Further C-values upon request • Please refer to X-capacitors in our catalog “RFI Suppression Components” Document Number: 26018 Revision: 01-Jul-10 h (mm) 6.5 8.5 8.5 9.0 9.5 10.5 11.5 10.5 12.0 13.5 17.5 15.5 18.5 21.0 23.5 24.5 28.0 32.5 40.0 VOLTAGE CODE 63 630 VDC/250 VAC (2) w (mm) 3.0 3.0 3.5 3.0 3.0 3.0 4.0 4.5 4.5 5.5 6.5 6.0 6.0 8.5 8.5 9.0 10.5 11.0 13.5 16.5 18.0 20.0 20.0 - h (mm) 6.5 6.5 8.5 8.5 8.5 8.5 9.0 9.5 9.5 10.5 11.5 12.0 12.0 14.5 17.5 17.0 18.5 21.0 23.5 29.5 33.0 40.0 40.0 - l (mm) 7.5 7.5 7.5 10.0 10.0 10.0 10.0 10.3 13.0 13.0 13.0 18.0 18.0 18.0 18.0 26.5 26.5 31.0 31.5 31.5 31.5 42.5 42.5 - PITCH (mm) 5.0 5.0 5.0 7.5 7.5 7.5 7.5 7.5 10.0 10.0 10.0 15.0 15.0 15.0 15.0 22.5 22.5 27.5 27.5 27.5 27.5 37.5 37.5 - VOLTAGE CODE 10 1000 VDC/500 VAC(2) PITCH (mm) 10.0 (1) 10.0 (1) 10.0 (1) 15.0 (1) 15.0 (1) 15.0 (1) 22.5 (1) 22.5 (1) 22.5 (1) 22.5 (1) 27.5 (1) 27.5 (1) 27.5 (1) - w (mm) 4.0 4.0 5.5 6.5 5.5 6.0 7.5 8.5 7.5 9.0 10.5 11.0 13.5 16.5 18.0 18.0 For technical questions, contact: [email protected] h (mm) 9.0 9.0 10.5 11.5 10.5 12.0 13.5 14.5 15.5 17.0 18.5 21.0 23.5 29.5 33.0 32.5 l (mm) 13.0 13.0 13.0 13.0 18.0 18.0 18.0 18.0 26.5 26.5 26.5 31.0 31.5 31.5 31.5 41.5 PITCH (mm) 10.0 10.0 10.0 10.0 15.0 15.0 15.0 15.0 22.5 22.5 22.5 27.5 27.5 27.5 27.5 37.5 www.vishay.com 149 MKP 1840 M Vishay Roederstein AC and Pulse Metallized Polypropylene Film Capacitors MKP Radial Potted Type RECOMMENDED PACKAGING LETTER CODE TYPE OF PACKAGING HEIGHT (H) (mm) REEL DIAMETER (mm) ORDERING CODE EXAMPLES PITCH ≤ 15 PITCH 22.5 - 27.5 PITCH 37.5 Ammo Reel Reel Ammo Bulk 18.5 18.5 18.5 18.5 - S (1) 350 500 L (2) - MKP 1840-410-404-G MKP 1840-410-404-W MKP 1840-510-254-V MKP 1840-510-254-G MKP 1840-510-254-M x x x x x x x G W V G - Notes (1) S = box size 55 mm x 210 mm x 340 mm (w x h x l) (2) L = box size 60 mm x 360 mm x 510 mm (w x h x l) EXAMPLE OF ORDERING CODE TYPE CAPACITANCE CODE VOLTAGE CODE TOLERANCE CODE MINI PACKAGING CODE 63 4 M G MKP 1840 447 Tolerance codes: 4 = 5 % (J); 3 = 2.5 % (H) METALLIZED POLYPROPYLENE FILM CAPACITOR, MKP 1840 PCM5, MINI VERSION (-5M) CAPACITANCE CAPACITANCE CODE dt = 0.5 ± 0.05 3300 pF 4700 pF 6800 pF 0.01 µF 0.015 µF 0.022 µF 0.033 µF 0.047 µF 0.068 µF 0.10 µF -233 -247 -268 -310 -315 -322 -333 -347 -368 -410 VOLTAGE CODE 25 250 VDC/160 VAC w h l PITCH (mm) (mm) (mm) (mm) 4.5 5.0 5.5 9.5 10.0 11.5 7.5 7.5 7.5 5 5 5 VOLTAGE CODE 40 400 VDC/220 VAC (1) w h l PITCH (mm) (mm) (mm) (mm) 4.5 4.5 5.5 5.5 - 9.5 9.5 11.5 11.5 - 7.5 7.5 7.5 7.5 - VOLTAGE CODE 63 630 VDC/250 VAC(1) w h l PITCH (mm) (mm) (mm) (mm) 5.0 5.0 5.0 5.0 - 3.5 3.5 4.5 4.5 5.5 - 8.5 8.5 9.5 9.5 11.5 - 7.5 7.5 7.5 7.5 7.5 - 5.0 5.0 5.0 5.0 5.0 - LETTER CODE TYPE OF PACKAGING HEIGHT (H) (mm) REEL DIAMETER (mm) ORDERING CODE EXAMPLE PITCH 5 G W - Ammo Reel Bulk 18.5 18.5 - S (2) 350 - MKP 1840-310/404-5MG MKP 1840-310/404-5MW MKP 1840-310/404-5M X X X Notes (1) Not suitable for mains applications (2) S = box size 55 mm x 210 mm x 340 mm (w x h x l) • Further C-values upon request EXAMPLE OF ORDERING CODE TYPE CAPACITANCE CODE MKP 1840 347 Tolerance codes: 4 = 5 % (J); 3 = 2.5 % (H) www.vishay.com 150 VOLTAGE CODE TOLERANCE CODE MINI PACKAGING CODE 25 4 5M G For technical questions, contact: [email protected] Document Number: 26018 Revision: 01-Jul-10 MKP 1840 M AC and Pulse Metallized Polypropylene Film Capacitors Vishay Roederstein MKP Radial Potted Type MOUNTING Normal Use The capacitors are designed for mounting on printed-circuit boards. The capacitors packed in bandoliers are designed for mounting in printed-circuit boards by means of automatic insertion machines. For detailed tape specifications refer to “Packaging Information” www.vishay.com/doc?28139 or end of catalog Specific Method of Mounting to Withstand Vibration and Shock In order to withstand vibration and shock tests, it must be ensure that the stand-off pips are in good contact with the printed-circuit board: • For pitches ≤ 15 mm capacitors shall be mechanically fixed by the leads • For larger pitches the capacitors shall be mounted in the same way and the body clamped Space Requirements on Printed-Circuit Board The maximum length and width of film capacitors is shown in the drawing: • Eccentricity as in drawing. The maximum eccentricity is smaller than or equal to the lead diameter of the product concerned • Product height with seating plane as given by “IEC 60717” as reference: hmax. ≤ h + 0.4 mm or hmax. ≤ h’ + 0.4 mm bmax. = b + 0.3 mm Eccentricity Imax. = I + 0.3 mm Storage Temperature • Storage temperature: Tstg = - 25 °C to + 40 °C with RH maximum 80 % without condensation Ratings and Characteristics Reference Conditions Unless otherwise specified, all electrical values apply to an ambient free temperature of 23 °C ± 1 °C, an atmospheric pressure of 86 kPa to 106 kPa and a relative humidity of 50 % ± 2 %. For reference testing, a conditioning period shall be applied over 96 h ± 4 h by heating the products in a circulating air oven at the rated temperature and a relative humidity not exceeding 20 %. Document Number: 26018 Revision: 01-Jul-10 For technical questions, contact: [email protected] www.vishay.com 151 MKP 1840 M Vishay Roederstein AC and Pulse Metallized Polypropylene Film Capacitors MKP Radial Potted Type CHARACTERISTICS Max. RMS voltage as a function of frequency Max. RMS voltage as a function of frequency 1000 VRMS 1000 0.0 1 100 0.2 2 1.0 2.2 6.8 10 0.0 47 0.1 0.4 7 Capacitance in µF VRMS Capacitance in µF 100 0.0 22 0. 0 10 6. 8 0. 1 0. 2. 2 01 0. 02 7 2 47 85 °C < Tamb < 100 °C, 250 Vdc Tamb ≤ 85 °C, 250 Vdc 1 103 22 1. 0. 04 0. 104 105 f (Hz) 1 102 106 Max. RMS voltage as a function of frequency 103 104 105 106 f (Hz) Max. RMS voltage as a function of frequency 1000 VRMS 1000 VRMS Capacitance in µF 100 1.0 6.8 10 0.0 0.0 1 47 0.2 2 2.2 Capacitance in µF 100 0. 01 04 7 0 0. 22 .0 1. 0. 22 0 0. 1 47 6. 8 2. 2 0. 0.1 022 0. 0.4 7 10 Tamb ≤ 85 °C, 400 Vdc 85 °C < Tamb < 100 °C, 400 Vdc 1 1 103 104 105 f (Hz) 102 106 Max. RMS voltage as a function of frequency 103 104 105 6 f (Hz) 10 Max. RMS voltage as a function of frequency 1000 VRMS VRMS 1000 Capacitance in µF 0.0 0.0 1 47 0.2 0.0 2 1.0 0.1 22 0.4 7 2.2 100 10 Capacitance in µF 100 10 85 °C < Tamb ≤ 100 °C, 630 Vdc/250 Vac Tamb ≤ 85 °C, 630 Vdc/250 Vac 1 103 www.vishay.com 152 104 0. 01 04 7 0 0. 22 .0 1. 0. 22 0 1 0. 47 2. 2 0. 105 f (Hz) 106 1 102 103 For technical questions, contact: [email protected] 104 105 6 f (Hz) 10 Document Number: 26018 Revision: 01-Jul-10 MKP 1840 M AC and Pulse Metallized Polypropylene Film Capacitors Vishay Roederstein MKP Radial Potted Type Max. RMS voltage as a function of frequency Max. RMS voltage as a function of frequency 1000 1000 100 1.0 0.0 1 0.0 47 0.2 2 Capacitance in µF VRMS VRMS Capacitance in µF 100 0. 0. 0.0 0.1 22 0. 0 0.4 7 10 7 22 1. 01 04 0. 0. 0. 1 02 2 47 10 Tamb ≤ 85 °C, 630 Vdc/400 Vac Tamb ≤ 85 °C, 630 Vdc/400 Vac 1 3 10 10 4 5 10 f (Hz) 1 102 6 10 Max. RMS voltage as a function of frequency 103 104 105 6 f (Hz) 10 Max. RMS voltage as a function of frequency 1000 Capacitance in µF Capacitance in µF VRMS VRMS 1000 0.0 1 100 1.0 0.0 47 0.2 2 0. 01 04 7 0 0. .0 22 0 22 1. 0 0 .1 .4 7 100 0.1 0. 0.0 22 0.4 7 10 10 85 °C < Tamb ≤ 100 °C, 1000 Vdc Tamb ≤ 85 °C, 1000 Vdc 1 103 104 Document Number: 26018 Revision: 01-Jul-10 105 6 f (Hz) 10 1 102 103 For technical questions, contact: [email protected] 104 105 6 f (Hz) 10 www.vishay.com 153 MKP 1840 M Vishay Roederstein AC and Pulse Metallized Polypropylene Film Capacitors MKP Radial Potted Type HEAT CONDUCTIVITY (G) AS A FUNCTION OF ORIGINAL PITCH AND CAPACITOR BODY THICKNESS IN mW/°C Wmax. (mm) HEAT CONDUCTIVITY (mW/°C) PITCH 5 mm PITCH 7.5 mm PITCH 10 mm PITCH 15 mm PITCH 22.5 mm PITCH 27.5 mm PITCH 37.5 mm 3.0 2.5 4.0 - - - - - 3.5 3.5 - - - - - - 4.0 - 5.0 6.0 - - - - 4.5 4.5 5.5 6.5 - - - - 5.0 5.0 6.5 - - - - - 5.5 6.5 - 7.5 9.0 - - - 5.7 - 7.5 - - - - - 6.0 - - - 10.5 - - - 6.5 - - 9.0 11.5 17.0 - - 7.5 - - - 13.5 19.0 - - 8.5 - - - 15.0 16.5 - - 9.0 - - - - 22.5 - - 10.5 - - - - 26.5 - - 11.0 - - - - 30.5 - - 11.5 - - - - - 33.5 - 13.5 - - - - - 41.0 - 14.5 - - - - - - 52.0 15.0 - - - - - 45.0 - 16.5 - - - - - 57.0 - 18.0 - - - - - 57.0 - 18.0 - - - - - 67.0 - 18.0 - - - - - - 75.5 20.0 - - - - - - 99.0 POWER DISSIPATION AND MAXIMUM COMPONENT TEMPERATURE RISE The power dissipation must be limited in order not to exceed the maximum allowed component temperature rise as a function of the free air ambient temperature. The power dissipation can be calculated according type detail specification “HQN-384-01/101: Technical Information Film Capacitors” with the typical tgd of the curves. The component temperature rise (ΔT) can be measured (see section “Measuring the Component Temperature” for more details) or calculated by ΔT = P/G: • ΔT = Component temperature rise (°C) • P = Power dissipation of the component (mW) • G = Heat conductivity of the component (mW/°C) www.vishay.com 154 For technical questions, contact: [email protected] Document Number: 26018 Revision: 01-Jul-10 MKP 1840 M AC and Pulse Metallized Polypropylene Film Capacitors Vishay Roederstein MKP Radial Potted Type MEASURING THE COMPONENT TEMPERATURE A thermocouple must be attached to the capacitor body as in: Thermocouple The temperature is measured in unloaded (Tamb) and maximum loaded condition (TC). The temperature rise is given by ΔT = Tc - Tamb. To avoid radiation or convection, the capacitor should be tested in a wind-free box. APPLICATION NOTE AND LIMITING CONDITIONS These capacitors are not suitable for mains applications as across-the-line capacitors without additional protection, as described hereunder. These mains applications are strictly regulated in safety standards and therefore electromagnetic interference suppression capacitors conforming the standards must be used. To select the capacitor for a certain application, the following conditions must be checked: 1. The peak voltage (UP) shall not be greater than the rated DC voltage (URdc) 2. The peak-to-peak voltage (UP-P) shall not be greater than the maximum (Up-p) to avoid the ionisation inception level 3. The voltage peak slope (dU/dt) shall not exceed the rated voltage pulse slope in an RC-circuit at rated voltage and without ringing. If the pulse voltage is lower than the rated DC voltage, the rated voltage pulse slope may be multiplied by URdc and divided by the applied voltage. For all other pulses following equation must be fulfilled: T dU dU 2 2 × -------- × dt < U Rdc × -------- dt rated dt 0 T is the pulse duration 4. The maximum component surface temperature rise must be lower than the limits (see graph max. allowed component temperature rise). 5. Since in circuits used at voltages over 280 V peak-to-peak the risk for an intrinsically active flammability after a capacitor breakdown (short circuit) increases, it is recommended that the power to the component is limited to 100 times the values mentioned in the table: “Heat conductivity” 6. When using these capacitors as across-the-line capacitor in the input filter for mains applications or as series connected with an impedance to the mains the applicant must guarantee that the following conditions are fulfilled in any case (spikes and surge voltages from the mains included). Voltage Conditions for 6 Above Tamb ≤ 85 °C 85 °C < Tamb ≤ 100 °C URac URac Maximum temperature RMS-overvoltage (< 24 h) 1.25 x URac 1.25 x URac Maximum peak voltage (VO-P) (< 2 s) 1.6 x URdc 1.1 x URdc ALLOWED VOLTAGES Maximum continuous RMS voltage Document Number: 26018 Revision: 01-Jul-10 For technical questions, contact: [email protected] www.vishay.com 155 MKP 1840 M Vishay Roederstein AC and Pulse Metallized Polypropylene Film Capacitors MKP Radial Potted Type INSPECTION REQUIREMENTS General Notes: Sub-clause numbers of tests and performance requirements refer to the “Sectional Specification, Publication IEC 60384-2 and Specific Reference Data”. Group C Inspection Requirements SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS SUB-GROUP C1A PART OF SAMPLE OF SUB-GROUP C1 4.1 Dimensions (detail) As specified in chapter “General Data” of this specification 4.3.1 Initial measurements Capacitance Tangent of loss angle at 10 kHz 4.3 Robustness of terminations Tensile and bending 4.4 Resistance to soldering heat Method: 1A Solder bath: 280 °C ± 5 °C Duration: 5 s 4.14 Component solvent resistance Isopropylalcohol at room temperature Method: 2 Immersion time: 5 min ± 0.5 min Recovery time: Min. 1 h, max. 2 h 4.4.2 Final measurements Visual examination No visible damage Legible marking Capacitance |ΔC/C| ≤ 2 % of the value measured initially Tangent of loss angle Increase of tan δ ≤ 0.002 Compared to values measured in 4.3.1 Capacitance Tangent of loss angle: at 100 kHz Isopropylalcohol at room temperature No visible damage Method: 1 Legible marking No visible damage SUB-GROUP C1B PART OF SAMPLE OF SUB-GROUP C1 4.6.1 Initial measurements 4.15 Solvent resistance of the marking No visible damage Rubbing material: cotton wool 4.6 Rapid change of temperature 4.7 Vibration 4.7.2 Final inspection 4.9 Shock www.vishay.com 156 Immersion time: 5 min ± 0.5 min θA = lower category temperature θB = upper category temperature 5 cycles Duration t = 30 min Visual examination Mounting: See section “Mounting” of this specification Procedure B4 Frequency range: 10 Hz to 55 Hz Amplitude: 0.75 mm or Acceleration 98 m/s² (whichever is less severe) Total duration 6 h Visual examination No visible damage Legible marking No visible damage Mounting: See section “Mounting” for more information Pulse shape: Half sine Acceleration: 490 m/s² Duration of pulse: 11 ms For technical questions, contact: [email protected] Document Number: 26018 Revision: 01-Jul-10 MKP 1840 M AC and Pulse Metallized Polypropylene Film Capacitors Vishay Roederstein MKP Radial Potted Type SUB-CLAUSE NUMBER AND TEST SUB-GROUP C1B PART OF SAMPLE OF SUB-GROUP C1 4.9.3 Final measurements CONDITIONS PERFORMANCE REQUIREMENTS Visual examination Capacitance Tangent of loss angle No visible damage |ΔC/C| ≤ 2 % of the value measured in 4.6.1 Increase of tan δ ≤ 0.002 Compared to values measured in 4.6.1 As specified in section “Insulation Resistance” of this specification Insulation resistance SUB-GROUP C1 COMBINED SAMPLE OF SPECIMENS OF SUB-GROUPS C1A AND C1B 4.10 Climatic sequence 4.10.2 Dry heat 4.10.3 Damp heat cyclic Test Db, first cycle Cold 4.10.4 Damp heat cyclic Test Db, remaining cycles 4.10.6.2 Final measurements Temperature: upper category temperature Duration: 16 h Temperature: lower category temperature Duration: 2 h 4.10.6 Visual examination Capacitance Tangent of loss angle Insulation resistance No visible damage Legible marking |ΔC/C| ≤ 3 % of the value measured in 4.4.2 or 4.9.3 Increase of tan δ: ≤ 0.003 Compared to values measured in 4.3.1 or 4.6.1 ≥ 50 % of values specified in section “Insulation Resistance” of this specification SUB-GROUP C2 4.11 Damp heat steady state Capacitance 4.11.1 Initial measurements Tangent of loss angle at 1 kHz 4.11.3 Final measurements Visual examination No visible damage Legible marking Capacitance |ΔC/C| ≤ 3 % of the value measured in 4.11.1. Tangent of loss angle Increase of tan δ ≤ 0.002 Compared to values measured in 4.11.1 Insulation resistance ≥ 50 % of values specified in section “Insulation Resistance” of this specification SUB-GROUP C3 4.12 Endurance Duration: 2000 h x URdc at 85 °C 0.875 x URdc at 100 °C 4.12.1 Initial measurements Capacitance Tangent of loss angle at 100 kHz 4.12.5 Final measurements Visual examination No visible damage Legible marking Capacitance |ΔC/C| ≤ 3 % compared to values measured in 4.12.1 Tangent of loss angle Increase of tan δ: ≤ 0.004 Compared to values measured in 4.12.1 Insulation resistance ≥ 50 % of values specified in section “Insulation Resistance” of this specification Document Number: 26018 Revision: 01-Jul-10 For technical questions, contact: [email protected] www.vishay.com 157 MKP 1840 M Vishay Roederstein AC and Pulse Metallized Polypropylene Film Capacitors MKP Radial Potted Type SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS SUB-GROUP C4 4.2.6 Temperature characteristics Initial measurements Capacitance Intermediate measurements Capacitance at lower category temperature Capacitance at 20 °C Capacitance at upper category temperature For - 55 °C to + 20 °C: 0 % ≤ |ΔC/C| ≤ 2 % or For 20 °C to 85 °C - 3 % ≤ |ΔC/C| ≤ 0 % As specified in section “ Capacitance” of this specification Final measurements Capacitance Insulation resistance As specified in section “Insulation Resistance” of this specification SUB-GROUP C4 4.13 Charge and discharge 10 000 cycles Charged to URdc Discharge resistance: UR R = ---------------------------------------------2.5 × C × ( dU ⁄ dt ) 4.13.1 Initial measurements Capacitance Tangent of loss angle at 100 kHz 4.13.3 Final measurements Capacitance |ΔC/C| ≤ 3 % compared to values measured in 4.13.1 Tangent of loss angle Increase of tan δ ≤ 0.005 Compared to values measured in 4.13.1 Insulation resistance ≥ 50 % of values specified in section “Insulation Resistance” of this specification www.vishay.com 158 For technical questions, contact: [email protected] Document Number: 26018 Revision: 01-Jul-10 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1