Miniature Aluminum Electrolytic Capacitors NRSY Series REDUCED SIZE, LOW IMPEDANCE, RADIAL LEADS, POLARIZED ALUMINUM ELECTROLYTIC CAPACITORS FEATURES • FURTHER REDUCED SIZING • LOW IMPEDANCE AT HIGH FREQUENCY • IDEALLY FOR SWITCHERS AND CONVERTERS RoHS Compliant includes all homogeneous materials *See Part Number System for Details CHARACTERISTICS Rated Voltage Range Capacitance Range Operating Temperature Range Capacitance Tolerance Max. Leakage Current After 2 minutes At +20°C 6.3 ~ 50Vdc 22 ~ 15,000µF -55 ~ +105°C ±20%(M) 0.01CV or 3µA, whichever is greater W.V. (Vdc) S.V. (Vdc) C < 1,000µF C = 2,200µF C = 3,300µF C = 4,700µF C = 6,800µF C = 10,000µF C = 15,000µF Z-40°C/Z+20°C Z-55°C/Z+20°C Max. Tan δ @ 120Hz/+20°C Low Temperature Stability Impedance Ratio @ 120Hz Load Life Test at Rated W.V. +105°C 1,000 Hours = 8φ or less +105°C 2,000 Hours = 10φ +105°C 3,000 Hours = 12.5φ up 6.3 8 0.28 0.30 0.32 0.34 0.38 0.56 0.56 3 6 16 20 0.20 0.22 0.24 0.26 0.30 2 4 25 32 0.16 0.18 0.20 0.22 2 4 35 44 0.14 0.16 0.18 2 3 50 63 0.12 0.14 2 3 Capacitance Change Within ±25% of initial measured value Tan δ Less than 200% of specified maximum value Leakage Current Less than specified maximum value MAXIMUM PERMISSIBLE RIPPLE CURRENT (mA RMS AT 10KHz ~ 200KHz AND 105OC) MAXIMUM IMPEDANCE (Ω AT 100KHz AND 20oC) ��� �µ�� 10 13 0.24 0.26 0.28 0.30 0.34 0.42 3 5 ������� ������� ����� ������� ������� ����� ��� �µ�� �� � � � � � ���� �� � �� � � � �� � �� � � � � ���� ���� �� � � � � ��� ��� �� � � � � ���� ���� �� � � � � ��� ��� ��� � � ���� ���� ���� ���� ��� � � ��� ��� ��� ��� ��� ���� ���� ���� ���� ���� ���� ��� ��� ��� ��� ��� ��� ��� ��� ���� ���� ���� ���� ����� ���� ��� ��� ��� ��� ��� ��� ��� ��� �� �� �� �� �� ��� �� �� �� ��� ��� ���� ���� ���� ����� ����� ���� ��� ��� ��� ��� ��� ��� ��� ���� ���� ����� ����� ����� ����� ����� ���� ��� ��� ��� ���� ���� ���� ���� ����� ����� ����� ����� ����� ����� ���� ��� ���� ���� ���� ���� ���� ���� ���� ���� ���� ���� � ���� ���� ���� ���� ���� � ���� � ���� ����� ����� ����� ����� ����� � ���� ����� ����� ����� ����� � � ���� ����� ����� ����� � � � ���� ���� ���� ���� ����� ����� ����� � � � ����� ���� ����� ����� � � � � � � ����� ���� ���� � � � � � � � � � � � � RIPPLE CURRENT CORRECTION FACTOR PRECAUTIONS ® Please review the notes on correct use, safety and precautions found on pages T10 & T11 of NIC’s Electrolytic Capacitor catalog. Also found at www.niccomp.com/precautions If in doubt or uncertainty, please review your specific application - process details with NIC’s technical support personnel: [email protected] NIC COMPONENTS CORP. www.niccomp.com Frequency (Hz) 100<f<1K 1K<f<10K 10K<f 22<C<100 0.55 0.8 1.0 100<C<1000 0.7 0.9 1.0 1000<C 0.9 0.95 1.0 www.lowESR.com www.RFpassives.com www.SMTmagnetics.com 101 Miniature Aluminum Electrolytic Capacitors NRSY Series STANDARD PRODUCT AND CASE SIZE TABLE D φ x L (mm) ���� �µ�� ���� �� �� �� ��� ��� ��� ��� ���� ���� ���� ���� ���� ������ ������ ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ��� ������� ������� ����� ��� � � � � ���� ������ ������ ������ ����� ����� ������� ������� ����� ������� �� � � � � ������ ������ ������ ������� ����� ������� ������� ����� ������� � �� � � � ���� ������ ������ ������ ����� ������� ������� ����� ������� � � �� � � � ������ ������ ������ ������� ����� ������� ����� ������� � � � LEADSPACE AND DIAMETER (mm) �� � ���� ���� ������ ������ ������� ����� ������� ����� ������� � � � � �� ���� ���� ������ ������ ������� ����� ����� ������� ������� � � � � � PART NUMBERING SYSTEM NRSY 102 M 25V 10x25 TB F RoHS Compliant Tape and Box* Size (D∅ x L) Rated Voltage Tolerance Code Capacitance Code Series *see tape specification for details Polarity Marking Case Dia. (D∅) 5 6.3 8 10 12.5 16 Leads Dia. (d∅) Lead Spacing (F) Dim. α 0.5 2.0 0.5 0.5 2.5 0.5 0.6 3.5 0.5 0.6 5.0 0.5 0.6 5.0 0.5 0.8 7.5 0.5 Insulation Sleeve dφ ± 0.05 F ± 0.5 L + β max. 15mm Min. 4mm Min. Dφ ± α β = L < 20mm = 1.5mm, L > 20mm = 2.0mm ® 102 NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com