TECHNICAL DATA DUAL OPERATIONAL AMPLIFIER IL4560 GENERAL DESCRIPTION The IL4560 integrated circuit is a high-gain, wide bandwidth, dual operational amplifier capable of driving 20 V peak-to-peak into 400 Ω loads. The IL4560 combines many of the features of the IL4558 as well as providing the capability of wider bandwidth, and higher slew rate make the IL4560 ideal for active filters, data and telecommunications, and many instrumentation applications. FEATURES • Operating Voltage (±4 V ∼ ±18 V) • Wide Gain Bandwidth Product (10 MHz typ.) • Slew Rate (4 V/µs typ.) • Bipolar Technology BLOCK DIAGRAM 2 A -INPUT 3 A +INPUT 6 B -INPUT B +INPUT 5 - 1 A OUTPUT + ORDERING INFORMATION IL4560N Plastic IL4560D SOIC IL4560S SIP-8 TA = -25° to 75° C for all packages. PI N ASSI GNM ENT - 7 B OUTPUT + EQUIVALENT CIRCUIT (1/2 Show) V+ -INPUT Output +INPUT V 2011, January, Rev. 01 IL4560 ABSOLUTE MAXIMUM RATINGS (Ta=25°C) Symbol Ratings Unit Supply Voltage ±18 V VID Differential Input Voltage 30 V VIC Input Voltage ±15* V + V /V - Topr Operation Temperature Range -25 ∼ +75 °C Tstg Storage Temperature Range -60 ∼ +125 °C PD * Parameter Power Dissipation DIP-8 500 SOP-8 300 SIP-8 800 mW For supply voltage less then ±15 V, the absolute maximum input voltage is equal to the supply voltage. ** Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. ELECTRICAL CHARACTERISTICS Symbol Parameter Test Condition RS ≤ 10 kΩ Min Max Unit - 6 mV V IO Input Offset Voltage I IO Input Offset Current - 200 nA IB Input Bias Current - 500 nA 0.3 - MΩ RIN Input Resistance AV Large Signal Voltage Gain RL ≥ 2 kΩ, V O = ±10 V 86 - dB VOM1 Maximum Output Voltage Swing 1 RL ≥ 2 kΩ ±12 - V VOM2 Maximum Output Voltage Swing 2 I O = 25 mA ±10 - V VICM Input Common Mode Voltage Range ±12 - V CMR Common Mode Rejection Ratio RS ≤ 10 kΩ 70 - dB SVR Supply Voltage Rejection Ratio RS ≤ 10 kΩ 76.5 - dB - 5.7 mA 3 5 V/µs ICC Operating Current SR Slew Rate RL ≥ 2 kΩ 2011, January, Rev. 01 IL4560 2011, January, Rev. 01 IL4560 2011, January, Rev. 01 IL4560 N SUFFIX PLASTIC DIP (MS – 001BA) A Dimension, mm 5 8 B 1 4 MIN MAX A 8.51 10.16 B 6.1 7.11 C L F Symbol C 5.33 D 0.36 0.56 F 1.14 1.78 -T- SEATING PLANE N G M K 0.25 (0.010) M J H D T NOTES: 1. Dimensions “A”, “B” do not include mold flash or protrusions. Maximum mold flash or protrusions 0.25 mm (0.010) per side. G 2.54 H 7.62 J 0° 10° K 2.92 3.81 L 7.62 8.26 M 0.2 0.36 N 0.38 D SUFFIX SOIC (MS - 012AA) Dimension, mm A 8 5 B H 1 G P 4 D K MIN MAX A 4.8 5 B 3.8 4 C 1.35 1.75 D 0.33 0.51 F 0.4 1.27 R x 45 C -T- Symbol SEATING PLANE J F 0.25 (0.010) M T C M NOTES: 1. Dimensions A and B do not include mold flash or protrusion. 2. Maximum mold flash or protrusion 0.15 mm (0.006) per side for A; for B ‑ 0.25 mm (0.010) per side. M G 1.27 H 5.72 J 0° 8° K 0.1 0.25 M 0.19 0.25 P 5.8 6.2 R 0.25 0.5 2011, January, Rev. 01 IL4560 8-Pin Plastic Single-in-Line (SIP) A 1 L1 8 L LQ Z e Dimension mm min max A B 6.24 0.40 6.60 0.54 b C 1.15 0.23 1.40 0.35 D 19.68 20.20 E e 2.675 2.54 2.925 L L1 LQ 2.95 3.25 1.61 Z 1.97 0.70 1.21 Z1 1.40 E D b B R 0.125 M Z1 C 2011, January, Rev. 01