LP07 Series SMT High Current Inductors Features Applications • • • • • AC/DC and DC/DC Converters • Servers/Workstations • Telecom Switches • Voltage Regulator Modules Low cost design Saturation current rating up to 85A Low DCR Suitable for pick and place applications Packaging Reel Diameter: 13”, Reel Width: 24mm, Pieces/reel: 350 Mechanical Recommended PCB layout 6.5 max A S 2.5 4.6 LP07-XXX YYWW Schematic 13.0 max F 6.5 A= LP07-181: 15.3mm max LP07-451 ~ 801: 15.0mm max LP07-142 ~ 392: 14.5mm max unit: mm Electrical Specifications Part Number Inductance1 DCR DCR (µH,nom.) (m , typ) (m ,max) Isat5 (A) Idc6 (A) LP07-181 0.18 0.32 0.45 85 45 LP07-451 0.45 0.69 0.90 53 40 LP07-801 0.80 1.20 1.40 36 31 LP07-142 1.40 1.90 2.20 28 26 LP07-202 2.00 2.60 3.00 24 21 LP07-282 2.80 3.90 4.30 20 17 LP07-392 3.90 4.50 5.25 16 16 Specifications subject to change without notice. 800.729.2099 tel www.icecomponents.com 1. Tested at 100kHz, 0.1Vrms. 2. Electrical specifications at 25°C. 3. Operating range: -40°C to +130°C. This is a combination of ambient plus temperature rise. 4. Meets UL 94V-0. 5. Isat is the DC current required to reduce to nominal inductance by 20% at an ambient temperature of 25°C. 6. Idc is the DC current required to produce a temperature rise of 40°C at an ambient temperature of 25°C. 7. Inductance tolerance is +/-20%. 8. For Lead Free components, please add “-LF” as suffix. 14 (02/08) LP07-1