Technical Data Sheet RF_35/09.14/6.2 Dieses Dokument ist urheberrechtlich geschützt ● This document is protected by copyright ● Rosenberger Hochfrequenztechnik GmbH & Co. KG 7-16 STRAIGHT JACK 60K1C7-C03N1 (1/2’’R) All dimensions are in mm; tolerances according to ISO 2768 m-H Interface According to IEC 61169-4, EN 122190, DIN 47223 Documents Assembly instruction MA_1C7-C03 Material and plating Connector parts Center contact (interface side) Center contact (cable side) Outer contact Back nut Dielectric Gasket Material Spring bronze Spring bronze Brass Brass TPX&POM Silicone Rosenberger Hochfrequenztechnik GmbH & Co. KG, Germany Tel.: +49 8684 18-0 Fax: +49 8684 18-499 www.rosenberger.de email: [email protected] Plating Silver, 3-6 µm Silver, 3-6 µm Flash white bronze over silver(e.g. Optargen®) Nickel, 2.5-5 µm Rosenberger Asia Pacific Electronic Co., Ltd., China Tel.: +86 10 80481995 Fax: +86 10 80497052 www.rosenbergerap.com email:[email protected] Page 1/2 Technical Data Sheet STRAIGHT JACK 7-16 60K1C7-C03N1 (1/2’’R) Electrical data 50 Ω DC to 8.3 GHz ≥ 35 dB @ DC to 1 GHz ≥ 32 dB @ 1 GHz to 2.7 GHz ≤ 0.05 dB ≥ 10 GΩ ≤ 0.4 mΩ ≤ 1.5 mΩ 500 V rms 1800 W @ 1 GHz 800 W @ 4 GHz ≥ 160 dBc (2 x 43 dBm) RF_35/09.14/6.2 Dieses Dokument ist urheberrechtlich geschützt ● This document is protected by copyright ● Rosenberger Hochfrequenztechnik GmbH & Co. KG Impedance Frequency Return loss Insertion loss Insulation resistance Center contact resistance Outer contact resistance Working voltage (at sea level) Power handling (at 20 °C, sea level, VSWR 1.0) Intermodulation (3rd order) - Limitations are possible due to the used cable type - Mechanical data Mating cycles Center contact captivation: axial radial Coupling torque (recommended) Proof torque ≥ 500 ≥ 200 N ≥ 2 Ncm 25 to 30 Nm ≤ 35 Nm Environmental data Temperature range Rapid change of temperature Corrosion resistance Vibration Climatic category Damp heat Degree of protection (mated pair) 2002/95/EC (RoHS) -45 °C to +85 °C DIN EN 122190, Sub-clause 4.6.7 DIN EN 122190, Sub-clause 4.6.10 DIN EN 122190, Sub-clause 4.6.3 DIN EN 122190, Sub-clause 4.6.5 (45/85/21) DIN EN 122190 , Sub-clause 4.6.6 IEC 60529, IP68 compliant Tooling Stripping tool 60W110-C03 Suitable cables SL 012R Series (Recommend) Packing Standard Weight 1 pce in bag 85.3 g/pce While the information has been carefully compiled to the best of our knowledge, nothing is intended as representation or warranty on our part and no statement herein shall be construed as recommendation to infringe existing patents. In the effort to improve our products, we reserve the right to make changes judged to be necessary. Draft Date Approved Date Rev. Engineering change number Name Date Roger 12/05/09 heanyang 26/07/16 e 16-0606 Songxianglong 19/04/16 Rosenberger Hochfrequenztechnik GmbH & Co. KG, Germany Tel.: +49 8684 18-0 Fax: +49 8684 18-499 www.rosenberger.de email: [email protected] Rosenberger Asia Pacific Electronic Co., Ltd., China Tel.: +86 10 80481995 Fax: +86 10 80497052 www.rosenbergerap.com email:[email protected] Page 2/2