Glass Passivated Bridge Rectifiers MB2S-G Thru. MB10S-G Reverse Voltage: 200 to 1000 Volts Forward Current: 0.8 Amp RoHS Device MBS Features 0.276 (7.00)MAX 0.031 (0.84) 0.019 (0.50) -Ideal for printed circuit board -High temperature soldering guaranteed: + - 260°C / 10 seconds /9.5mm Lead length at 5 lbs.,(2.3kg) tension. 0.157 (4.00) 0.142 (3.60) Mechanical data 0.102 (2.60) 0.087 (2.20) 0.053 (1.53) 0.037 (0.95) 0.014 (0.35) 0.006 (0.15) -Case: Molded plastic. -Lead: Solder plated. 0.008 (0.20)max 0.083 (2.12) 0.043 (1.10) -Polarity: As marked. -Weight:0.13 gram(approx.). 0.106 (2.70) 0.090 (2.30) 0.118(3.00)MAX 0.193 (4.90) 0.177 (4.50) 0.053 (1.53) 0.037 (0.95) Dimensions in inches and (millimeters) Maximum Rating And Electrical Characteristics Rating at TA=25°C, unless otherwise noted. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Symbol MB2S-G MB4S-G MB6S-G MB8S-G Maximum Recurrent Peak Reverse Voltage VRRM 200 400 600 800 1000 V Maximum RMS Voltage VRMS 140 280 420 560 700 V Maximum DC Blocking Voltage VDC 200 400 600 800 1000 V Maximum Average Forward Recurrent Current I(AV) 0.8 A Peak Forward Surge Current, 8.3mS Single Half Sine-wave, Superimposed On Rated Load (JEDEC Method) IFSM 35 A VF 1.0 V Parameter Maximum Instantaneous Forward Voltage at 0.4A Maximum DC Reverse Current Rated DC Blocking Voltage per leg Typical Thermal Resistance @TJ=125°C IR 5.0 500 mA (Note 1) RθJA 70 (Note 2) RθJL 20 TJ -55 to +150 °C TSTG -55 to +150 °C Operating Temperature Range Storage Temperature Range @TJ=25°C MB10S-G Unit °C/W Notes: 1. On aluminum suvstrate P.C.B. with an area of 0.8x0.8”(20x20mm) mounted on 0.05x0.05”(1.3x1.3mm) solder pad. 2.On glass epoxy P.C.B. mounted on 0.05x0.05”(1.3x1.3mm) pads. REV: A Page 1 QW-BBR73 Comchip Technology CO., LTD. Glass Passivated Bridge Rectifiers Rating and Characteristic Curves (MB2S-G Thru. MB10S-G) Fig.1 - Maximum Forward Current Derating Curve Fig.2 - Maximum Non-repetitive Forward Surge Current Per Bridge Elelment 40 Peak Forward Surge Current, (A) Average Forward Current, (A) 0.8 0.6 0.4 0.2 Resistive or inductive load 0 0 20 40 60 80 30 20 10 0 100 120 140 160 1 Ambient Temperature, (°C) Fig.3 - Typical Instantaneous Forward Characteristics Per Bridge Element Instantaneous Reverse Current, (μA) Instantaneous Forward Current, (A) 1.0 0.1 0.4 0.6 0.8 1.0 1.2 1.4 100 Fig.4 - Typical Reverse Characteristics Per Bridge Element 10 0.01 10 Number Of Cycle At 60Hz 1.6 100 TJ=125°C 10 1.0 0.1 TJ=25°C 0.01 Instantaneous Forward Voltage, (V) 0 20 40 60 80 100 Percent of Rated Peak Reverse Voltage, (%) REV: A Page 2 QW-BBR73 Comchip Technology CO., LTD. Glass Passivated Bridge Rectifiers Reel Taping Specification d P0 P1 E Index hole T F - + W B P A C 12 o 0 D2 D1 D W1 Trailer Device ....... ....... End ....... ....... Leader ....... ....... ....... ....... 10 pitches (min) Start 10 pitches (min) Direction of Feed MBS MBS SYMBOL A B C d D D1 D2 (mm) 5.00 ± 0.10 7.24 ± 0.10 2.95 ± 0.10 1.55 ± 0.05 330.00 ± 1.00 75.00 ± 1.00 14.00 ± 0.50 (inch) 0.197 ± 0.004 0.285 ± 0.004 0.116 ± 0.004 0.061 ± 0.002 12.992 ± 0.039 2.953 ± 0.039 0.551 ± 0.020 SYMBOL E F P P0 P1 W W1 (mm) 1.75 ± 0.10 5.50 ± 0.05 8.00 ± 0.10 4.00 ± 0.10 2.00 ± 0.05 12.00 ± 0.30 18.4 ± 0.50 (inch) 0.069 ± 0.004 0.217 ± 0.002 0.315 ± 0.004 0.157 ± 0.004 0.079 ± 0.002 0.472 ± 0.012 0.724 ± 0.020 REV: A Page 3 QW-BBR73 Comchip Technology CO., LTD. Glass Passivated Bridge Rectifiers Marking Code Part Number Marking Code MB2S-G MB2S MB4S-G MB4S MB6S-G MB6S MB8S-G MB8S MB10S-G MB10S - + MBXXS X/XX = Product type marking code Suggested PAD Layout A MBS SIZE (mm) (inch) A 2.40 0.094 B 0.90 0.035 C 1.84 0.072 D 6.00 0.236 D C B Standard Packaging Case Type MBS Qty Per Reel Reel Size (Pcs) (inch) 2,500 13 REV: A Page 4 QW-BBR73 Comchip Technology CO., LTD.