Kingbright APT1608ZGC 1.6x0.8mm smd chip led lamp Datasheet

1.6X0.8mm SMD CHIP LED LAMP
PRELIMINARY SPEC
ATTENTION
Part Number: APT1608ZGC
GREEN
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
DISCHARGE
SENSITIVE
DEVICES
Features
Description
z1.6mmX0.8mm
zLOW
SMT LED, 0.75mm THICKNESS.
POWER CONSUMPTION.
The Green source color devices are made with AlInGaN
on Sapphire Light Emitting Diode.
zWIDE
VIEWING ANGLE.
Static electricity and surge damage the LEDS.
zIDEAL
FOR BACKLIGHT AND INDICATOR.
It is recommended to use a wrist band or
zVARIOUS
COLORS AND LENS TYPES AVAILABLE.
anti-electrostatic glove when handling the LEDs.
zPACKAGE:
2000PCS / REEL .
All devices, equipment and machinery must be electri-
zMOISTURE
SENSITIVITY LEVEL : LEVEL 3.
cally grounded.
zRoHS
COMPLIANT.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.1(0.004") unless otherwise noted.
3.Specifications are subject to change without notice.
4.The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAG3857
REV NO: V.2
DATE: JAN/03/2007
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: D.M.LIU.
PAGE: 1 OF 5
ERP: 1203003342
Selection Guide
Dice
Part No.
APT1608ZGC
Iv (mcd) [2]
@ 20mA
Lens Type
GREEN (AlInGaN)
WATER CLEAR
Viewing
Angle [1]
Min.
Typ.
2θ1/2
110
300
120°
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
2. Luminous intensity/ luminous Flux: +/-15%.
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Device
λpeak
Peak Wavelength
Green
λD [1]
Dominant Wavelength
Δλ1/2
Typ.
Max.
Units
Test Conditions
515
nm
IF=20mA
Green
525
nm
IF=20mA
Spectral Line Half-width
Green
30
nm
IF=20mA
C
Capacitance
Green
45
pF
VF=0V;f=1MHz
VF [2]
Forward Voltage
Green
3.3
4.1
V
IF=20mA
IR
Reverse Current
Green
10
uA
VR = 5V
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
Absolute Maximum Ratings at TA=25°C
Parameter
Green
Units
Power dissipation
102.5
mW
DC Forward Current
25
mA
Peak Forward Current [1]
150
mA
5
V
Reverse Voltage
Operating / Storage Temperature
-40°C To +85°C
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
SPEC NO: DSAG3857
REV NO: V.2
DATE: JAN/03/2007
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: D.M.LIU.
PAGE: 2 OF 5
ERP: 1203003342
Green
APT1608ZGC
SPEC NO: DSAG3857
REV NO: V.2
DATE: JAN/03/2007
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: D.M.LIU.
PAGE: 3 OF 5
ERP: 1203003342
APT1608ZGC
Recommended Soldering Pattern
(Units : mm; Tolerance: ± 0.1)
Tape Specifications
(Units : mm)
SPEC NO: DSAG3857
REV NO: V.2
DATE: JAN/03/2007
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: D.M.LIU.
PAGE: 4 OF 5
ERP: 1203003342
PACKING & LABEL SPECIFICATIONS
APT1608ZGC
SPEC NO: DSAG3857
REV NO: V.2
DATE: JAN/03/2007
APPROVED: J. Lu
CHECKED: Allen Liu
DRAWN: D.M.LIU.
PAGE: 5 OF 5
ERP: 1203003342
Similar pages