Industrial Ethernet Switch DIN-Rail Managed Gigabit Ethernet Switch v1.0a Sep, 2015 IGS-P9812GP Series IGS-P9812GP Series Industrial IEC 61850-3 20-port managed Gigabit Ethernet switch with 8x10/100/1000Base-T(X) ports and 12x100/1000Base-X, SFP socket Industrial Ethernet Switch 1 Features ▪ Designed for power substation / Railway application and fully compliant with the requirement of IEC 61850-3 and IEEE 1613 ▪ Leading EN50155-compliant Ethernet switch for rolling stock application ▪ Support O-Ring (recovery time < 30ms over 250 units of connection) and MSTP(RSTP/STP compatible) for Ethernet Redundancy ▪ Open-Ring support the other vendor's ring technology in open architecture ▪ O-Chain allow multiple redundant network rings ▪ Support standard IEC 62439-2 MRP*NOTE (Media Redundancy Protocol) function ▪ Support IEEE 1588v2 clock Synchronization ▪ Support IPV6 new internet protocol version ▪ Support Modbus TCP protocol ▪ Support IEEE 802.3az Energy-Efficient Ethernet technology ▪ Provided HTTPS/SSH protocol to enhance network security ▪ Support SMTP client & NTP server ▪ Support IP-based bandwidth management ▪ Support application-based QoS management ▪ Support Device Binding security function ▪ Support DOS/DDOS auto prevention ▪ IGMP v2/v3 (IGMP snooping support) for filtering multicast traffic ▪ Support SNMP v1/v2c/v3 & RMON & 802.1Q VLAN Network Management ▪ Support ACL, TACACS+ and 802.1x User Authentication for security ▪ Support 9.6K Bytes Jumbo Frame ▪ Support DBU-01 backup unit device to quickly backup/restore configuration ▪ Multiple notification for warning of unexpected event ▪ Web-based ,Telnet, Console (CLI), and Windows utility (Open-Vision) configuration ▪ Support LLDP Protocol ▪ Rigid IP-30 housing design ▪ DIN-Rail and wall mounting enabled Introduction IGS-P9812GP is IEC 61850-3 managed redundant ring Ethernet switch with 8x10/100/1000Base-T(X) ports and 12x100/1000Base-X SFP ports. The switch is designed for power substation application and rolling stock application, fully compliant with the requirement of IEC 61850-3 and IEEE 1613. And the switch designed for the toughest and fully compliant with EN50155 requirement. With completely support of Ethernet Redundancy protocol, O-Ring (recovery time < 30ms over 250 units of connection) and MSTP (RSTP/STP compatible) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. And support wide operating temperature from -40 oC to 75 oC. IGS-P9812GP can also be managed centralized and convenient by Open-Vision, Except the Web-based interface, Telnet and console (CLI) configuration. Therefore, the switch is one of the most reliable choice for highly-managed and Fiber Ethernet power substation and rolling stock application. ▪ O-Ring : O-Ring is ORing's proprietary redundant ring technology, with recovery time of less 30 milliseconds and up to 250 nodes. The O-Ring redundant *NOTE: This function is available by request only 1-192 w w w.oring - net wo rk in g.co m Industrial Ethernet Switch DIN-Rail Managed Gigabit Ethernet Switch v1.0a Sep, 2015 ▪ Open-Ring : Open-Ring is an enhanced redundant technology that makes ORing's switches compatible with other vendor's proprietary redundant ring technologies. It enables ORing's switches to form a single ring with other vendor's switch. In cases where the ring is setup using proprietary technology, ORing offers a compatibility service where ORing can make its switches compatible with your particular network requirements. ▪ O-Chain : ▪ MRP*NOTE : Media Redundancy Protocol (MRP) is a data network protocol standardized by the IEC 62439-2. It allows rings of Ethernet switches to overcome any single failure with recovery time much faster than achievable with Spanning Tree Protocol. ▪ IP-based Bandwidth Management : The switch provide advanced IP-based bandwidth management which can limit the maximum bandwidth for each IP device. User can configure IP camera and NVR with more bandwidth and limit other device bandwidth. Industrial Media Converter O-Chain is the revolutionary network redundancy technology that provides the add-on network redundancy topology for any backbone network, O-Chain allows multiple redundant network rings of different redundancy protocols to join and function together as a larger and more robust compound network topology. O-Chain providing ease-of-use while maximizing fault-recovery swiftness, flexibility, compatibility, and cost-effectiveness in one set of network redundancy topology. Industrial Ethernet Switch ring technology can protect mission-critical application from network interruptions or temporary malfunction with its fast recover technology. ▪ Application-Based QoS : The switch also support application-based QoS. Application-based QoS can set highest priority for data stream according to TCP/UDP port number. ▪ Advanced DOS/DDOS Auto Prevention : The switch also provided advanced DOS/DDOS auto prevention. If there is any IP flow become big in short time, the switch will lock the source IP address for certain time to prevent the attack. It's hardware based prevention so it can prevent DOS/DDOS attack immediately and completely. ▪ Modbus TCP : This is a Modbus variant used for communications over TCP/IP networks. ▪ IEEE 802.3az Energy-Efficient Ethernet : This is a set of enhancements to the twisted-pair and backplane Ethernet family of networking standards that will allow for less power consumption during periods of low data activity. The intention was to reduce power consumption by 50% or more. Industrial Cellular VPN Router PLC IES-2042FX-SS Control Center O-Ring PLC IES-2042FX-SS SCADA PLC Industrial Wireless Access Point ▪ IEEE 1588 Technology : The IEEE 1588 technology can fulfill precision time synchronization requirements for protection and control applications. Industrial Device Server ▪ Device Binding Function : ORing special Device Binding function can only permit allowed IP address with MAC address to access the network. Hacker cannot access the IP surveillance network without permission. It can avoid hacker from stealing video privacy data and attacking IP camera, NVR and controllers. IES-2042FX-SS IP Camera Control Center IES-2042PA Control Center Industrial M2M Gateway PLC SCADA SCADA Power Generation Communications Network Management Software Distribution Accessories Smart Metering Transmission *NOTE: This function is available by request only D esign ed for R u gged E xcellence 1-193 Industrial Ethernet Switch DIN-Rail Managed Gigabit Ethernet Switch v1.0a Sep, 2015 Dimension (Unit =mm) Dimensions R2.5 G10 G18 G9 G17 PWR Fail Close G12 G20 G11 G19 G10 G18 G9 G17 Fail Open Relay V+/L 100/1000X 100/1000X 7.50 PWR PWR1 PWR2 PWR2 87.0 Relay 100/1000X 100/1000X V-/N R3.95 Fail Open 17.5 G19 48.0 G20 G11 62.0 Fail Close G12 PWR1 154.0 Industrial Ethernet Switch 1 159.0 V1+ V1- G8 G7 G6 G5 G4 G3 G2 G1 G16 G15 G14 G8 G7 G6 G5 G4 G3 G2 G1 G16 G15 PWR1 PWR1 G14 V+/L V2+ V-/N G13 G13 V1- PWR2 IGS-P9812GP-HV 10/100/1000T PWR2 10/100/1000T IGS-P9812GP-LV 87.9 (Unit=mm) Open-Vision ORing's switches are intelligent switches. Different from other traditional redundant switches, ORing provides a set of Windows utility (Open-Vision) for user to manage and monitor all of industrial Ethernet switches on the industrial network. Commander Host Monitor Topology View Specifications ORing Switch Model IGS-P9812GP-LV IGS-P9812GP-HV Physical Ports 10/100/1000Base-T(X) Ports in RJ45 Auto MDI/MDIX 8 100/1000Base-X with SFP port 12 Technology 1-194 80.5 115.0 Ethernet Standards IEEE 802.3 for 10Base-T IEEE 802.3u for 100Base-TX and 100Base-FX IEEE 802.3ab for 1000Base-T IEEE 802.z for 1000Base-X IEEE 802.3x for Flow control IEEE 802.3ad for LACP (Link Aggregation Control Protocol ) IEEE 802.1p for COS (Class of Service) IEEE 802.1Q for VLAN Tagging IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol) IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol) IEEE 802.1x for Authentication IEEE 802.1AB for LLDP (Link Layer Discovery Protocol) MAC Table Priority Queues 8k 8 w w w.oring - net wo rk in g.co m Industrial Ethernet Switch DIN-Rail Managed Gigabit Ethernet Switch Switch Properties Jumbo frame LED indicators Green : Power LED x 3 Ring Master Indicator (R.M.) Green : Indicates that the system is operating in O-Ring Master mode Green : Indicates that the system operating in O-Ring mode Green Blinking : Indicates that the Ring is broken. Amber : Indicate unexpected event occurred Green for Link/Act. Dual color LED for speed indicator: Green for 1000Mbps, Amber for 100Mbps, Off-light for 10Mbps Green for port Link/Act. O-Ring Indicator (Ring) Fault Indicator (Fault) 10/100/1000Base-T(X) RJ45 Port Indicator 100/1000Base-X SFP Port Indicator Fault contact Relay Industrial M2M Gateway Power Indicator (PWR) Industrial Cellular VPN Router RS-232 Serial Console Port Industrial Wireless Access Point Network Redundancy Industrial Device Server Software Features Industrial Media Converter Security Features Store-and-Forward Switching latency: 7 us Switching bandwidth: 40Gbps Max. Number of Available VLANs: 4095 VLAN ID Range: VID 1 to 4094 IGMP multicast groups: 256 for each VLAN Port rate limiting: User Define Https / SSH enhance network security Up to 9.6K Bytes Device Binding security feature Enable/disable ports, MAC based port security Port based network access control (802.1x) VLAN (802.1Q ) to segregate and secure network traffic Radius centralized password management SNMPv3 encrypted authentication and access security Https / SSH enhance network security STP/RSTP/MSTP (IEEE 802.1D/w/s) Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units TOS/Diffserv supported Quality of Service (802.1p) for real-time traffic VLAN (802.1Q) with VLAN tagging and GVRP supported IGMP Snooping NTP Server SNMP v1/v2c/v3, MIB, RMON IP-based bandwidth management Application-based QoS management DOS/DDOS auto prevention Port configuration, status, statistics, monitoring, security DHCP Server/Client/Relay SMTP Client Modbus TCP NTP server O-Ring Open-Ring O-Chain MRP*NOTE Fast Recovery MSTP (RSTP/STP compatible) RS-232 in RJ45 connector with console cable. 115200bps, 8, N, 1 Industrial Ethernet Switch Processing v1.0a Sep, 2015 Relay output to carry capacity of 1A at 24VDC Power Dual DC inputs. 12~48VDC on 6-pin terminal block Power consumption (Typ.) 22 Watts Overload current protection Present Reverse Polarity Protection Present Dual power inputs. 85~264VAC / 88~373VDC on 6-pin terminal block 24 Watts Accessories Redundant Input power Physical Characteristic IP-30 Dimension (W x D x H) 115 (W) x 159 (D) x 154 (H)mm (4.53 x 6.26 x 6.06 inch) Weight (g) 1520 g Network Management Software Enclosure 1870 g Environmental Storage Temperature -40 to 85oC (-40 to 185oF) Operating Temperature -40 to 75oC (-40 to 167oF ) *NOTE: This function is available by request only D esign ed for R u gged E xcellence 1-195 Industrial Ethernet Switch DIN-Rail Managed Gigabit Ethernet Switch Operating Humidity v1.0a Sep, 2015 5% to 95% Non-condensing Regulatory approvals Power Automation IEC 61850-3, IEEE 1613 EMI Shock FCC Part 15, CISPR (EN55022) class A, EN50155 (EN50121-3-2, EN55011, EN50121-4) EN61000-4-2 (ESD) EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11 IEC60068-2-27 Free Fall IEC60068-2-32 Vibration IEC60068-2-6 Safety EN60950-1 Warranty 5 years EMS Industrial Ethernet Switch 1 Ordering Information I G S -P9 A B B CC - DD Code Definition Option 10/100/1000Base-T(X) Port Number - 8: 8 ports Model Name Available Model - 12: 12 ports Additional Port Type -GP: Gigabit SFP ports Voltage Type -LV: 12~48VDC power inputs model -HV: 85~264VAC / 88~373VDC power inputs model Description IGS-P9812GP-LV Industrial IEC 61850-3 20-port managed Gigabit Ethernet switch with 8x10/100/1000Base-T(X) ports and 12x100/1000Base-X, SFP socket, low-voltage power inputs IGS-P9812GP-HV_US Industrial IEC 61850-3 20-port managed Gigabit Ethernet switch with 8x10/100/1000Base-T(X) ports and 12x100/1000Base-X, SFP socket, high-voltage power inputs, US power cord IGS-P9812GP-HV_UK Industrial IEC 61850-3 20-port managed Gigabit Ethernet switch with 8x10/100/1000Base-T(X) ports and 12x100/1000Base-X, SFP socket, high-voltage power inputs, UK power cord IGS-P9812GP-HV_EU Industrial IEC 61850-3 20-port managed Gigabit Ethernet switch with 8x10/100/1000Base-T(X) ports and 12x100/1000Base-X, SFP socket, high-voltage power inputs, EU power cord IGS-P9812GP-HV_JP Industrial IEC 61850-3 20-port managed Gigabit Ethernet switch with 8x10/100/1000Base-T(X) ports and 12x100/1000Base-X, SFP socket, high-voltage power inputs, JP power cord Packing List ‧IGS-P9812GP x 1 ‧DIN-Rail Kit x 1 ‧ORing Tool CD x 1 ‧Wall-mount Kit x 2 ‧Quick Installation Guide x 1 ‧Console Cable x 1 1-196 100/1000Base-(F)X SFP Port Number w w w.oring - net wo rk in g.co m Optional Accessories ‧Open-Vision M500 : Powerful Network Management Windows Utility Suit, 500 IP devices ‧DR-45 series : 45 Watts DIN-Rail power supply ‧DR-75 series : 75 Watts DIN-Rail power supply ‧DR-120 series : 120 Watts DIN-Rail power supply ‧SFP100 series : 100Mbps SFP optical transceiver ‧SFP 1G series : 1Gbps SFP optical transceiver ‧DBU-01 : backup unit device