NXP BAS45AL Low-leakage diode Datasheet

BAS45AL
Low-leakage diode
Rev. 5 — 6 August 2010
Product data sheet
1. Product profile
1.1 General description
Epitaxial medium-speed switching diode with a low leakage current, encapsulated in a
small hermetically sealed glass SOD80C Surface-Mounted Device (SMD) package.
1.2 Features and benefits
„
„
„
„
Continuous reverse voltage: max. 125 V
Repetitive peak forward current: max. 625 mA
Low reverse current: max. 1 nA
Switching time: typ. 1.5 μs
1.3 Applications
„ Low leakage current applications
1.4 Quick reference data
Table 1.
Quick reference data
Symbol
Parameter
IF
forward current
VR
reverse voltage
VF
forward voltage
[1]
Conditions
[1]
IF = 100 mA
Min
Typ
Max
Unit
-
-
250
mA
-
-
125
V
-
-
1000
mV
Device mounted on an FR4 Printed-Circuit Board (PCB), single-sided copper, tin-plated and standard
footprint.
2. Pinning information
Table 2.
Pinning
Pin
Description
1
cathode
2
anode
Simplified outline
Graphic symbol
[1]
k
a
1
2
006aab040
[1]
The marking band indicates the cathode.
BAS45AL
NXP Semiconductors
Low-leakage diode
3. Ordering information
Table 3.
Ordering information
Type number
BAS45AL
Package
Name
Description
Version
-
hermetically sealed glass surface-mounted package;
2 connectors
SOD80C
4. Marking
Table 4.
Marking codes
Type number
Marking code
BAS45AL
marking band
5. Limiting values
Table 5.
Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134).
Symbol
Parameter
VRRM
repetitive peak reverse
voltage
Conditions
VR
reverse voltage
IF
forward current
IFRM
repetitive peak forward
current
IFSM
non-repetitive peak
forward current
[1]
square wave
Product data sheet
Max
Unit
125
V
-
125
V
-
250
mA
-
625
mA
[2]
tp = 1 μs
-
4
A
tp = 1 ms
-
1
A
-
0.5
A
-
400
mW
tp = 1 s
BAS45AL
Min
-
Tamb ≤ 25 °C
[1]
Ptot
total power dissipation
Tj
junction temperature
-
175
°C
Tstg
storage temperature
−65
+175
°C
[1]
Device mounted on an FR4 PCB, single-sided copper, tin-plated and standard footprint.
[2]
Tj = 25 °C prior to surge.
All information provided in this document is subject to legal disclaimers.
Rev. 5 — 6 August 2010
© NXP B.V. 2010. All rights reserved.
2 of 11
BAS45AL
NXP Semiconductors
Low-leakage diode
6. Thermal characteristics
Table 6.
Thermal characteristics
Symbol
Parameter
Rth(j-t)
thermal resistance from
junction to tie-point
Rth(j-a)
thermal resistance from
junction to ambient
[1]
Conditions
in free air
[1]
Min
Typ
Max
Unit
-
-
300
K/W
-
-
375
K/W
Device mounted on an FR4 PCB, single-sided copper, tin-plated and standard footprint.
7. Characteristics
Table 7.
Characteristics
Tj = 25 °C unless otherwise specified.
Symbol
Parameter
Conditions
Min
Typ
Max
Unit
VF
forward voltage
IF = 1 mA
-
-
780
mV
IF = 10 mA
-
-
860
mV
IF = 100 mA
-
-
1000
mV
VR = 125 V
-
-
1
nA
VR = 30 V; Tj = 125 °C
-
-
300
nA
VR = 125 V; Tj = 125 °C
-
-
500
nA
VR = 125 V; Tj = 150 °C
-
-
2
μA
-
-
4
pF
-
1.5
-
μs
IR
Cd
diode capacitance
trr
reverse recovery time
[1]
BAS45AL
Product data sheet
reverse current
Emax = 100 lx
VR = 0 V; f = 1 MHz
[1]
When switched from IF = 10 mA to IR = 10 mA; RL = 100 Ω; measured at IR = 1 mA.
All information provided in this document is subject to legal disclaimers.
Rev. 5 — 6 August 2010
© NXP B.V. 2010. All rights reserved.
3 of 11
BAS45AL
NXP Semiconductors
Low-leakage diode
mbg522
300
mbg523
300
IF
(mA)
IF
(mA)
(1)
200
200
100
100
(2)
(3)
0
0
0
100
Tamb (°C)
0
200
0.5
1.0
VF (V)
1.5
(1) Tj = 150 °C; typical values
FR4 PCB, standard footprint
(2) Tj = 25 °C; typical values
(3) Tj = 25 °C; maximum values
Fig 1.
Forward current as a function of ambient
temperature; derating curve
Fig 2.
Forward current as a function of forward
voltage
mbg704
102
IFSM
(A)
10
1
10−1
1
10
102
103
104
tp (μs)
Based on square wave currents.
Tj = 25 °C prior to surge
Fig 3.
Non-repetitive peak forward current as a function of pulse duration; maximum values
BAS45AL
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 5 — 6 August 2010
© NXP B.V. 2010. All rights reserved.
4 of 11
BAS45AL
NXP Semiconductors
Low-leakage diode
mbd456
104
mbg524
3
IR
(nA)
Cd
(pF)
103
2
max
102
typ
10
1
1
10−1
0
50
100
Tj (°C)
0
150
0
10
15
VR (V)
20
f = 1 MHz; Tj = 25 °C
VR = 125 V
Fig 4.
5
Reverse current as a function of junction
temperature
Fig 5.
Diode capacitance as a function of reverse
voltage; typical values
8. Test information
tr
RS = 50 Ω
V = VR + IF × RS
tp
t
D.U.T.
10 %
+ IF
IF
SAMPLING
OSCILLOSCOPE
trr
t
Ri = 50 Ω
VR
(1)
90 %
mga881
input signal
Fig 6.
output signal
Reverse recovery time test circuit and waveforms
BAS45AL
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 5 — 6 August 2010
© NXP B.V. 2010. All rights reserved.
5 of 11
BAS45AL
NXP Semiconductors
Low-leakage diode
9. Package outline
0.3
0.3
1.60
1.45
3.7
3.3
Dimensions in mm
Fig 7.
06-03-16
Package outline SOD80C
10. Packing information
Table 8.
Packing methods
The indicated -xxx are the last three digits of the 12NC ordering code.[1]
Type number
BAS45AL
[1]
BAS45AL
Product data sheet
Package Description
SOD80C
4 mm pitch, 8 mm tape and reel
Packing quantity
2500
10000
-115
-135
For further information and the availability of packing methods, see Section 14.
All information provided in this document is subject to legal disclaimers.
Rev. 5 — 6 August 2010
© NXP B.V. 2010. All rights reserved.
6 of 11
BAS45AL
NXP Semiconductors
Low-leakage diode
11. Soldering
4.55
4.30
2.30
solder lands
solder paste
2.25 1.70 1.60
solder resist
occupied area
Dimensions in mm
0.90
(2x)
Fig 8.
sod080c
Reflow soldering footprint SOD80C
6.30
4.90
2.70
1.90
solder lands
solder resist
occupied area
2.90 1.70
tracks
Dimensions in mm
sod080c
Fig 9.
BAS45AL
Product data sheet
Wave soldering footprint SOD80C
All information provided in this document is subject to legal disclaimers.
Rev. 5 — 6 August 2010
© NXP B.V. 2010. All rights reserved.
7 of 11
BAS45AL
NXP Semiconductors
Low-leakage diode
12. Revision history
Table 9.
Revision history
Document ID
Release date
Data sheet status
Change notice
Supersedes
BAS45AL v.5
20100806
Product data sheet
-
BAS45AL_4
Modifications:
•
The format of this data sheet has been redesigned to comply with the new identity
guidelines of NXP Semiconductors.
•
•
•
•
•
•
•
Legal texts have been adapted to the new company name where appropriate.
Table 1 “Quick reference data”: added
Section 4 “Marking”: added
Figure 7: superseded by minimized package outline drawing
Section 10 “Packing information”: added
Section 11 “Soldering”: added
Section 13 “Legal information”: updated
BAS45AL_4
19990528
Product specification
-
BAS45AL_3
BAS45AL_3
19990504
Product specification
-
BAS45AL_2
BAS45AL_2
19960313
Product specification
-
BAS45AL_1
BAS45AL
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 5 — 6 August 2010
© NXP B.V. 2010. All rights reserved.
8 of 11
BAS45AL
NXP Semiconductors
Low-leakage diode
13. Legal information
13.1 Data sheet status
Document status[1][2]
Product status[3]
Definition
Objective [short] data sheet
Development
This document contains data from the objective specification for product development.
Preliminary [short] data sheet
Qualification
This document contains data from the preliminary specification.
Product [short] data sheet
Production
This document contains the product specification.
[1]
Please consult the most recently issued document before initiating or completing a design.
[2]
The term ‘short data sheet’ is explained in section “Definitions”.
[3]
The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status
information is available on the Internet at URL http://www.nxp.com.
13.2 Definitions
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. NXP Semiconductors does not give any
representations or warranties as to the accuracy or completeness of
information included herein and shall have no liability for the consequences of
use of such information.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is intended
for quick reference only and should not be relied upon to contain detailed and
full information. For detailed and full information see the relevant full data
sheet, which is available on request via the local NXP Semiconductors sales
office. In case of any inconsistency or conflict with the short data sheet, the
full data sheet shall prevail.
Product specification — The information and data provided in a Product
data sheet shall define the specification of the product as agreed between
NXP Semiconductors and its customer, unless NXP Semiconductors and
customer have explicitly agreed otherwise in writing. In no event however,
shall an agreement be valid in which the NXP Semiconductors product is
deemed to offer functions and qualities beyond those described in the
Product data sheet.
13.3 Disclaimers
Limited warranty and liability — Information in this document is believed to
be accurate and reliable. However, NXP Semiconductors does not give any
representations or warranties, expressed or implied, as to the accuracy or
completeness of such information and shall have no liability for the
consequences of use of such information.
In no event shall NXP Semiconductors be liable for any indirect, incidental,
punitive, special or consequential damages (including - without limitation - lost
profits, lost savings, business interruption, costs related to the removal or
replacement of any products or rework charges) whether or not such
damages are based on tort (including negligence), warranty, breach of
contract or any other legal theory.
Notwithstanding any damages that customer might incur for any reason
whatsoever, NXP Semiconductors’ aggregate and cumulative liability towards
customer for the products described herein shall be limited in accordance
with the Terms and conditions of commercial sale of NXP Semiconductors.
malfunction of an NXP Semiconductors product can reasonably be expected
to result in personal injury, death or severe property or environmental
damage. NXP Semiconductors accepts no liability for inclusion and/or use of
NXP Semiconductors products in such equipment or applications and
therefore such inclusion and/or use is at the customer’s own risk.
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. NXP Semiconductors makes no
representation or warranty that such applications will be suitable for the
specified use without further testing or modification.
Customers are responsible for the design and operation of their applications
and products using NXP Semiconductors products, and NXP Semiconductors
accepts no liability for any assistance with applications or customer product
design. It is customer’s sole responsibility to determine whether the NXP
Semiconductors product is suitable and fit for the customer’s applications and
products planned, as well as for the planned application and use of
customer’s third party customer(s). Customers should provide appropriate
design and operating safeguards to minimize the risks associated with their
applications and products.
NXP Semiconductors does not accept any liability related to any default,
damage, costs or problem which is based on any weakness or default in the
customer’s applications or products, or the application or use by customer’s
third party customer(s). Customer is responsible for doing all necessary
testing for the customer’s applications and products using NXP
Semiconductors products in order to avoid a default of the applications and
the products or of the application or use by customer’s third party
customer(s). NXP does not accept any liability in this respect.
Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) will cause permanent
damage to the device. Limiting values are stress ratings only and (proper)
operation of the device at these or any other conditions above those given in
the Recommended operating conditions section (if present) or the
Characteristics sections of this document is not warranted. Constant or
repeated exposure to limiting values will permanently and irreversibly affect
the quality and reliability of the device.
Terms and conditions of commercial sale — NXP Semiconductors
products are sold subject to the general terms and conditions of commercial
sale, as published at http://www.nxp.com/profile/terms, unless otherwise
agreed in a valid written individual agreement. In case an individual
agreement is concluded only the terms and conditions of the respective
agreement shall apply. NXP Semiconductors hereby expressly objects to
applying the customer’s general terms and conditions with regard to the
purchase of NXP Semiconductors products by customer.
Right to make changes — NXP Semiconductors reserves the right to make
changes to information published in this document, including without
limitation specifications and product descriptions, at any time and without
notice. This document supersedes and replaces all information supplied prior
to the publication hereof.
No offer to sell or license — Nothing in this document may be interpreted or
construed as an offer to sell products that is open for acceptance or the grant,
conveyance or implication of any license under any copyrights, patents or
other industrial or intellectual property rights.
Suitability for use — NXP Semiconductors products are not designed,
authorized or warranted to be suitable for use in life support, life-critical or
safety-critical systems or equipment, nor in applications where failure or
Export control — This document as well as the item(s) described herein
may be subject to export control regulations. Export might require a prior
authorization from national authorities.
BAS45AL
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 5 — 6 August 2010
© NXP B.V. 2010. All rights reserved.
9 of 11
BAS45AL
NXP Semiconductors
Low-leakage diode
Quick reference data — The Quick reference data is an extract of the
product data given in the Limiting values and Characteristics sections of this
document, and as such is not complete, exhaustive or legally binding.
Non-automotive qualified products — Unless this data sheet expressly
states that this specific NXP Semiconductors product is automotive qualified,
the product is not suitable for automotive use. It is neither qualified nor tested
in accordance with automotive testing or application requirements. NXP
Semiconductors accepts no liability for inclusion and/or use of
non-automotive qualified products in automotive equipment or applications.
In the event that customer uses the product for design-in and use in
automotive applications to automotive specifications and standards, customer
(a) shall use the product without NXP Semiconductors’ warranty of the
product for such automotive applications, use and specifications, and (b)
whenever customer uses the product for automotive applications beyond
NXP Semiconductors’ specifications such use shall be solely at customer’s
own risk, and (c) customer fully indemnifies NXP Semiconductors for any
liability, damages or failed product claims resulting from customer design and
use of the product for automotive applications beyond NXP Semiconductors’
standard warranty and NXP Semiconductors’ product specifications.
13.4 Trademarks
Notice: All referenced brands, product names, service names and trademarks
are the property of their respective owners.
14. Contact information
For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: [email protected]
BAS45AL
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 5 — 6 August 2010
© NXP B.V. 2010. All rights reserved.
10 of 11
BAS45AL
NXP Semiconductors
Low-leakage diode
15. Contents
1
1.1
1.2
1.3
1.4
2
3
4
5
6
7
8
9
10
11
12
13
13.1
13.2
13.3
13.4
14
15
Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . 1
General description . . . . . . . . . . . . . . . . . . . . . 1
Features and benefits . . . . . . . . . . . . . . . . . . . . 1
Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Quick reference data . . . . . . . . . . . . . . . . . . . . 1
Pinning information . . . . . . . . . . . . . . . . . . . . . . 1
Ordering information . . . . . . . . . . . . . . . . . . . . . 2
Marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 2
Thermal characteristics . . . . . . . . . . . . . . . . . . 3
Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Test information . . . . . . . . . . . . . . . . . . . . . . . . . 5
Package outline . . . . . . . . . . . . . . . . . . . . . . . . . 6
Packing information . . . . . . . . . . . . . . . . . . . . . 6
Soldering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Revision history . . . . . . . . . . . . . . . . . . . . . . . . . 8
Legal information. . . . . . . . . . . . . . . . . . . . . . . . 9
Data sheet status . . . . . . . . . . . . . . . . . . . . . . . 9
Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Contact information. . . . . . . . . . . . . . . . . . . . . 10
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Please be aware that important notices concerning this document and the product(s)
described herein, have been included in section ‘Legal information’.
© NXP B.V. 2010.
All rights reserved.
For more information, please visit: http://www.nxp.com
For sales office addresses, please send an email to: [email protected]
Date of release: 6 August 2010
Document identifier: BAS45AL
Similar pages