AMT8304 2.125 Gb/s Integrated 850nm MSM-TIA DATA SHEET - Rev 2.0 FEATURES • • • • • Differential Output TIA 3.3V Operation Automatic Gain Control Integrated 850nm MSM Detector & TIA TO-46 Ultra Flat-Window or Lens Hermetic Package • High Reliability APPLICATIONS • T46F TO-46 Ultra Flat Window Package 2x Fibre Channel (2.125 Gb/s) T4TL T46L TO-46 Lens TO-46 Package with Lens Package Tabbed Header PRODUCT DESCRIPTION The ANADIGICS AMT8304 is a 3.3V monolithically integrated Metal-Semiconductor-Metal (MSM) photodetector and transimpedance amplifier (TIA) used to convert an 850nm input optical signal into a differential output voltage, and is manufactured in ANADIGICS’ 6” GaAs wafer fabrication facility. The integrated MSM and TIA receiver maximizes the receiver performance by minimizing the photodetector input parasitics to the TIA and VDD internally biasing the photodetector to achieve high sensitivity, bandwidth and overload performance. As an integrated product the reliability is inherently better than a discrete solution, and both the MSM-TIA integrated circuit and TO-46 flat window and TO-46 lens packaged receiver pass stringent reliability requirements. These products are readily designed into receivers and transceivers for 2x Fibre Channel applications. 2 OUT 1 3 OUT AGC US Patents: 5047728, 5646573 PIN Charge Pump 4.5 GHz Osc 4 Figure 1: Equivalent Circuit 12/2003 AMT8304 Figure 2: T46F/T46L/T4TL Pin Outline (Bottom View) Table 1: Package PIN Description PIN DESCRIPTION COMMENT 1 VOUT - TIA Output Voltage Logical ’1’ with optical (non-Inverted) input 2 VDD - Positive Supply Voltage 3 VOUT - TIA Output Voltage Logical ’0’ with optical (Inverted) input 4 Ground +3.3 Volts Case is grounded ELECTRICAL CHARACTERISTICS Table 2: Absolute Maximum Ratings VDD 6.0V PIN +5dBm TS Storage Temp. -65 ° C to 125 °C Stresses in excess of the absolute ratings may cause permanent damage. Functional operation is not implied under these conditions. Exposure to absolute ratings for extended periods of time may adversely affect reliability. 2 DATA SHEET - Rev 2.0 12/2003 AMT8304 Table 3: Electrical Characteristics PARAMETER MIN TYP MAX UNIT 770 850 860 nm - 100 - µm Small Signal Differential Responsivity (1) (@ 50 MHz) 1000 - - V/W Bandwidth (1) 1400 1900 - MHz Low Frequency Cutoff - - 300 KHz Output Resistance - 40 - Ω Optical Overload (2) 0 - - dBm Optical Sensitivity (2) -19 - - dBm Differential Output Voltage (3) - 750 - mV TRISE and TFALL (20-80%) - 140 - ps Duty Cycle Distortion (3) - 5 - % Total Jitter (3),(4) - 50 - ps Supply Current - 35 55 mA +3.0 +3.3 +3.6 Volts 0 - 80 °C Wavelength (λ) Detector Diameter (3) Operating Voltage Range Operating Case Temperature Range Notes: (1) Measured at –14 dBm optical input power with output connected into RL = 100Ω (differential) (2) Measured at 10-10 BER with a 27-1 PRBS at 2.125 Gb/s (3) Measured with a 27-1 PRBS at 2.125 Gb/s, an input optical power of -3dBm and RL = 100 Ω (differential) (4) 6 σ about the center eye crossing DATA SHEET - Rev 2.0 12/2003 3 AMT8304 PERFORMANCE DATA Figure 3: Eye Diagram with an Optical Input Power of –19dBm (with a 4GHz LPF) 10mV/Div 100ps/Div Figure 4: Eye Diagram with an Optical Input Power of –9.0dBm 50mV/Div. 100ps/Div Figure 5: Eye Diagram with an Optical Input Power of 0dBm 150mV/Div. 4 100ps/Div DATA SHEET - Rev 2.0 12/2003 AMT8304 Figure 6: Supply Current vs. Temperature Figure 7: Bandwidth vs. Temperature 2400 50.0 2200 2000 Bandwidth (MHz) Supply Current (mA) 45.0 40.0 35.0 1800 1600 1400 30.0 3V 3.3V 3.6V 3V 3.3V 3.6V 1200 25.0 1000 0 10 20 30 40 50 60 70 80 90 0 20 40 60 80 100 Case Temperature (C) Case Temperature (C) Figure 8: Differential Responsivity vs. Temperature Figure 9: Sensitivity vs. Temperature -18.0 1500 -18.5 -19.0 1300 Sensitivity (dBm) Differential Responsivity (V/W) 1400 1200 1100 -19.5 -20.0 -20.5 -21.0 3V 3.3V 3.6V 1000 3V 3.3V 3.6V -21.5 -22.0 900 0 20 40 60 80 100 0 20 40 60 80 100 Case Temperature (C) Case Temperature (C) DATA SHEET - Rev 2.0 12/2003 5 AMT8304 MEASUREMENT METHODS Lightwave Analyzer HP 8702D DUT Test Fixture Optical Attenuator Laser Power Supply Extinction Ratio= 3dB Figure 10: Test Setup for Frequency Response BERT Pulse Pattern Generator Error Detector Hybrid Coupler Limiting Amplifier Optical Attenuator Laser DUT Test Fixture Extinction Ratio = 9dB Power Supply Figure 11: Test Setup for Sensitivity Digital Communication Analyzer HP83480A Pulse Pattern Generator Laser Optical Attenuator DUT Test Fixture Extinction Ratio = 9dB Power Supply Figure 12: Test Setup for Eye Measurements 6 DATA SHEET - Rev 2.0 12/2003 25 dB Gain AMT8304 V DD 0.1uF VOUT VOUT DUT 0.1uF 0.1uF Figure 13: DUT Test Fixture Schematic APPLICATION INFORMATION V DD 0.1uF 2 OUT OUT 0.1uF 1 3 CF R0 0.1uF AGC Charge Pump LIMITING AMPLIFIER 7.5 GHz OSC 4 Figure 14: Application Schematic CF is an optional single pole noise filter 1 C = 2πf cR F fc is the desired cutoff frequency R = 50 Ω RO is required with high input resistance limiting amplifiers RO = 100 Ω DATA SHEET - Rev 2.0 12/2003 7 AMT8304 PACKAGE OUTLINE Figure 15: T46F Package Outline Diagram 8 DATA SHEET - Rev 2.0 12/2003 AMT8304 Figure 16: T46L Package Outline Diagram DATA SHEET - Rev 2.0 12/2003 9 AMT8304 Figure 17: T4TL Package Outline Diagram 10 DATA SHEET - Rev 2.0 12/2003 AMT8304 NOTES DATA SHEET - Rev 2.0 12/2003 11 PCS, KPCS CDMA 4mm x 4mm Power Amplifier Modules ORDERING INFORMATION PACKAGE OPTION ORDER NUMBER PACKAGE DESRIPTION AMT8304T46F TO-46F Ultra Flat Window Package AMT8304T46L TO-46L Lens Package AMT8304T4TL TO-46L Lens Package with Tabbed Header ANADIGICS, Inc. 141 Mount Bethel Road Warren, New Jersey 07059, U.S.A. Tel: +1 (908) 668-5000 Fax: +1 (908) 668-5132 URL: http://www.anadigics.com E-mail: [email protected] IMPORTANT NOTICE ANADIGICS, Inc. reserves the right to make changes to its products or to discontinue any product at any time without notice. The product specifications contained in Advanced Product Information sheets and Preliminary Data Sheets are subject to change prior to a product’s formal introduction. Information in Data Sheets have been carefully checked and are assumed to be reliable; however, ANADIGICS assumes no responsibilities for inaccuracies. ANADIGICS strongly urges customers to verify that the information they are using is current before placing orders. WARNING ANADIGICS products are not intended for use in life support appliances, devices or systems. Use of an ANADIGICS product in any such application without written consent is prohibited. 12 DATA SHEET - Rev 2.0 12/2003