PRODUCT DATASHEET MS6000 Series 2-Channel Digital Oscilloscopes A B C D E F 5.6" (142mm) graphical color LCD for viewing multiple waveforms plus built-in digital multimeter display and analog bargraph. DISPLAYS: A. Oscilloscope B. Dual Channel C. Multimeter D. Pass/Fail Test E. Reference F. X/Y Format Features • Three models to choose from: • Waveform Recorder to capture/replay input - Model MS6060 — 60MHz bandwidth waveforms from CH1 and CH2 with a maximum - Model MS6100 — 100MHz bandwidth record length of 1000 frames - Model MS6200 — 200MHz bandwidth • • • Pass-Fail function compares a stored waveform to an unknown input One-touch automatic setup optimizes the position, range, timebase, and triggering to assure a stable • Average Mode for smoothing waveforms display of virtually any waveform • Square Wave Output (2V, 1kHz) for probe adjustment Easy-to-use pop-up menu with built-in • Built-in 6,000 count True RMS MultiMeter with multi-language system analog bargraph • 23 Automatic Measurements • Waveform Math: Add, Subtract, Multiply, and Divide test leads, 7.4V Li-Ion battery, universal AC charger, • Store and recall up to 1000 waveform screens and and carrying case • Complete with two 1X/10X oscilloscope probes, setups using the installed 2G microSD card • Automatic cursor tracking measurements • XY Mode • Built-in FFT function converts a time-domain signal into its frequency components to measure harmonic content and distortion in systems Specifications subject to change without notice. Copyright © 2012 Extech Instruments Corporation. All rights reserved including the right of reproduction in whole or in part in any form. Rev. 6/22/12 www.extech.com Specifications MS6060 MS6100 Bandwidth 60MHz 100MHz 200MHz Sample rate per channel 500MS/s 500MS/s 500MS/s Risetime 5.8ns 3.5ns 1.8ns Timebase Range 4ns/div to 40s/div 4ns/div to 40s/div 2ns/div to 40s/div MS6200 Common Features/Functions Oscilloscope Functions Record Length 1M points per channel Display Size 5.6" (142mm) color LCD; 640 x 480 pixels Channels 2 Vertical Sensitivity 2mV/div to 5V/div Vertical Resolution 8 bits Glitch Capture Yes Sample Mode Normal, Average, Peak Detect Trigger Modes Edge, Pulse, Alt, Video, Slope Trigger Source CH1, CH2 Trigger Coupling AC, DC, LF, HF, Noise Reduction Input impedance 1MΩ/20pF Max Input Voltage 300V (peak) Cursor Measurement Voltage and time; Delta (CH1-CH2) True RMS MultiMeter Functions AC Voltage 60mV, 600mV, 6V, 60V, 600V DC Voltage 60mV, 600mV, 6V, 60V, 600V, 800V AC/DC Current 60mA, 600mA, 10A Resistance 600Ω, 6kΩ, 60kΩ, 600kΩ, 6MΩ, 60MΩ Capacitance 5nF to 400μF Diode and Continuity Yes Power Supply 3 hours Li-ion rechargeable battery; AC Charger Dimensions/Weight 9.6 x 6.4 x 2" (245 x 163 x 52mm) / 2.6lbs (1.2kg) Ordering MS6060 ............. 60MHz Dual Channel Digital Oscilloscope MS6100 ............. 100MHz Dual Channel Digital Oscilloscope MS6200 ............. 200MHz Dual Channel Digital Oscilloscope BATT-74V ........... 7.4V Li-Ion Replacement Battery TL620................. 1X/10X 200MHz Oscilloscope Probe TL625................. High Voltage Oscilloscope Probe 100MHz, 2000V Specifications subject to change without notice. Copyright © 2011 Extech Instruments Corporation. All rights reserved including the right of reproduction in whole or in part in any form. www.extech.com