Previous Datasheet Index Next Data Sheet Provisional Data Sheet No. PD-9.552B ® HEXFET JANTX2N6845 POWER MOSFET JANTXV2N6845 [REF:MIL-PRF-19500/563] [GENERIC:IRFF9120] P-CHANNEL Ω HEXFET -100 Volt, 0.60Ω Product Summary HEXFET technology is the key to International Rectifier’s advanced line of power MOSFET transistors. The efficient geometry achieves very low onstate resistance combined with high transconductance. HEXFET transistors also feature all of the well-establish advantages of MOSFETs, such as voltage control, very fast switching, ease of paralleling and electrical parameter temperature stability. They are well-suited for applications such as switching power supplies, motor controls, inverters, choppers, audio amplifiers, and high energy pulse circuits, and virtually any application where high reliability is required. Part Number JANTX2N6845 JANTXV2N6845 BVDSS -100V RDS(on) ID 0.60Ω -4.0A Features: ■ ■ ■ ■ ■ Avalanche Energy Rating Dynamic dv/dt Rating Simple Drive Requirements Ease of Paralleling Hermetically Sealed Absolute Maximum Ratings Parameter I D @ VGS = -10V, TC = 25°C ID @ VGS = -10V, TC = 100°C IDM PD @ TC = 25°C VGS dv/dt TJ TSTG Continuous Drain Current Continuous Drain Current Pulsed Drain Current ➀ Max. Power Dissipation Linear Derating Factor Gate-to-Source Voltage Peak Diode Recovery dv/dt ➂ Operating Junction Storage Temperature Range JANTX2N6845, JANTXV2N6845 Units -4.0 -2.6 -16 20 0.16 ±20 -5.0 -55 to 150 300 (0.063 in. (1.6mm) from case for 10.5 seconds) 0.98 (typical) Lead Temperature Weight To Order A W W/K ➄ V V/ns o C g Previous Datasheet Index Next Data Sheet JANTX2N6845, JANTXV2N6845 Device Electrical Characteristics @ Tj = 25°C (Unless Otherwise Specified) Min. Typ. Max. Units -100 — — -0.10 — — — — -2.0 1.25 — — — — — — — — 0.60 0.69 -4.0 — -25 -250 V V/°C IGSS IGSS Qg Qgs Qgd td(on) tr td(off) tf LD Gate-to-Source Leakage Forward Gate-to-Source Leakage Reverse Total Gate Charge Gate-to-Source Charge Gate-to-Drain (“Miller”) Charge Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time Internal Drain Inductance — — 4.3 1.3 1.0 — — — — — — — — — — — — — — 5.0 -100 100 16.3 4.7 9.0 60 100 50 70 — LS Internal Source Inductance — 15 — Ciss Coss Crss Input Capacitance Output Capacitance Reverse Transfer Capacitance — — — 380 170 45 — — — Ω V S( ) Ω Parameter BVDSS Drain-to-Source Breakdown Voltage ∆BVDSS /∆TJ Temperature Coefficient of Breakdown Voltage RDS(on) Static Drain-to-Source On-State Resistance VGS(th) Gate Threshold Voltage gfs Forward Transconductance IDSS Zero Gate Voltage Drain Current µA nA nC ns Test Conditions VGS = 0V, ID = -1.0 mA Reference to 25°C, ID = -1.0 mA VGS = -10V, ID = -2.6A➃ VGS = -10V, ID = -4.0A VDS = V GS, ID = -250µA VDS > -15V, IDS = -2.6A ➃ VDS = 0.8 x Max Rating,VGS = 0V VDS = 0.8 x Max Rating VGS = 0V, TJ = 125°C VGS = -20V VGS = 20V VGS = -10V, ID = -4.0A VDS = Max. Rating x 0.5 see figures 6 and 13 VDD = -50V, ID = -4.0A, RG = 7.5Ω, VGS = -10V see figure 10 nH pF Measured from the Modified MOSFET drain lead, 6mm (0.25 symbol showing the in.) from package to internal inductances. center of die. Measured from the source lead, 6mm (0.25 in.) from package to source bonding pad. VGS = 0V, VDS = -25V f = 1.0 MHz see figure 5 Source-Drain Diode Ratings and Characteristics Parameter Min. Typ. Max. Units IS I SM Continuous Source Current (Body Diode) Pulse Source Current (Body Diode) ➀ VSD t rr Q RR t on Diode Forward Voltage Reverse Recovery Time Reverse Recovery Charge Forward Turn-On Time — — — — -4.0 -16 A Test Conditions Modified MOSFET symbol showing the integral reverse p-n junction rectifier. Tj = 25°C, IS = -4.0A, VGS = 0V ➃ Tj = 25°C, IF = -4.0A, di/dt ≤ -100A/µs VDD ≤ -50V ➃ Intrinsic turn-on time is negligible. Turn-on speed is substantially controlled by L S + LD. — — — — — — -4.8 200 3.1 V ns µC Thermal Resistance Parameter Min. Typ. Max. Units RthJC Junction-to-Case — — 6.25 RthJA Junction-to-Ambient — — 175 To Order K/W Test Conditions Typical socket mount Previous Datasheet Index Next Data Sheet JANTX2N6845, JANTXV2N6845 Device Fig. 1 — Typical Output Characteristics TC = 25°C Fig. 2 — Typical Output Characteristics TC = 150°C Fig. 3 — Typical Transfer Characteristics Fig. 4 — Normalized On-Resistance Vs.Temperature Fig. 5 — Typical Capacitance Vs. Drain-to-Source Voltage Fig. 6 — Typical Gate Charge Vs. Gate-to-Source Voltage To Order Previous Datasheet Index Next Data Sheet JANTX2N6845, JANTXV2N6845 Device Fig. 7 — Typical Source-to-Drain Diode Forward Voltage Fig. 8 — Maximum Safe Operating Area Fig. 9 — Maximum Drain Current Vs. Case Temperature Fig. 10b — Switching Time Waveforms Fig. 10a — Switching Time Test Circuit To Order Previous Datasheet Index Next Data Sheet JANTX2N6845, JANTXV2N6845 Device Fig. 11 — Maximum Effective Transient Thermal Impedance, Junction-to-Case Vs. Pulse Duration Fig. 12a — Unclamped Inductive Test Circuit Fig. 12b — Unclamped Inductive Waveforms Fig. 13a — Gate Charge Test Circuit Fig. 13b — Basic Gate Charge Waveform To Order Previous Datasheet Index Next Data Sheet JANTX2N6845, JANTXV2N6845 Device ➀ Repetitive Rating; Pulse width limited by ➁ maximum junction temperature. (see figure 11) @ VDD = -25V, Starting TJ = 25°C, EAS = [0.5 * L * (IL2) * [BV DSS/(BV DSS-VDD)] Peak IL = -4.0A, VGS = -10V, 25 ≤ RG ≤ 200Ω ➂ ISD ≤ -4.0A, di/dt ≤ -110A/µs, VDD ≤ BVDSS, TJ ≤ 150°C ➃ Pulse width ≤ 300 µs; Duty Cycle ≤ 2% ➄ K/W = °C/W W/K = W/°C Case Outline and Dimensions — TO-205AF (Modified TO-39) All dimensions are shown millimeters (inches) WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, Tel: (310) 322 3331 EUROPEAN HEADQUARTERS: Hurst Green, Oxted, Surrey RH8 9BB, UK Tel: ++ 44 1883 732020 IR CANADA: 7321 Victoria Park Ave., Suite 201, Markham, Ontario L3R 2Z8, Tel: (905) 475 1897 IR GERMANY: Saalburgstrasse 157, 61350 Bad Homburg Tel: ++ 49 6172 96590 IR ITALY: Via Liguria 49, 10071 Borgaro, Torino Tel: ++ 39 11 451 0111 IR FAR EAST: K&H Bldg., 2F, 3-30-4 Nishi-Ikeburo 3-Chome, Toshima-Ki, Tokyo Japan 171 Tel: 81 3 3983 0086 IR SOUTHEAST ASIA: 315 Outram Road, #10-02 Tan Boon Liat Building, Singapore 0316 Tel: 65 221 8371 http://www.irf.com/ Data and specifications subject to change without notice. 10/96 To Order