B-XS-W5 Series 0.5 Watt SIP4 Single Output DC/DC-Converter SELECTION GUIDE Model Input Voltage (V) Output Voltage (V) Output Current (MA) Efficiency (%) Max. Capacitive Load B0505XS-W5 5 5 100 80 470μF FEATURES B1205XS-W5 12 5 100 82 470μF ◆Industry Standard Pinout B0512XS-W5 5 12 42 83 150μF ◆1kVDC Isolation B1212XS-W5 12 12 42 86 150μF ◆UL94V-0 Package Material B0515XS-W5 5 15 33 84 150μF ◆Optional Continuous Short Circuit Protected B1215XS-W5 12 15 33 87 150μF ◆Fully Encapsulated ◆Custom Solutions Available Specifications ◆Efficiency to 87% Input Voltage Range ◆3 year Warranty ±10% Output Voltage Accuracy MODEL SELECTION B①05②05③X④ S⑤-W5⑥ ①Product Series ③Output Voltage ⑤SIP Package ②Input Voltage ④Fixed Input ⑥Rated Power ±5% Line Voltage Regulation 1.2%/1% of Vin typ.. Load Voltage Regulation (10% to 100% full load) 10% max. / 4% typ.. Output Ripple and Noise (20MHz limited) 100mVp-p max. Operating Frequency 20kHz min. / 54kHz typ. Efficiency at Full Load 70% min. / 85% typ. Efficiency at 50%l Load 65% min. / 80% typ. Minimum Load = 0% Specifications valid for 10% minimum load only. Isolation Voltage (tested for 1 second) APPLICATIONS 1000VDC (rated for 1 minute) The B-XS-W5 DC/DC converters are typically Isolation Capacitance used in general purpose low power isolation Isolation Resistance and voltage matching applications, and feature Short Circuit Protection a full industrial operating temperature range of Suffix "P" -40℃~ +85℃ without derating. Operating Temperature Range (free air convection) 500VAC / 60Hz 20pF min. / 75pF max. 10 GΩmin. 1 Second Continuous -40°C to +85°C (see Graph） Storage Temperature Range Derating-Graph(Ambient Temperature) -55°C to +125°C Relative Humidity 95% RH Package Weight 1.4g Packing Quantity 42 pcs per Tube MTBF (+25°C) (+85°C) } using MIL-HDBK 217F 985 x 103hours using MIL-HDBK 217F 200 x 103hours Detailed Information see Application Notes chapter "MTBF" ℃, nominal input voltage, full load and after warm-up ) (measured at TA= 25 25℃ add “P” for Continuous Short Circuit Protection,e.g.:B0505XS-W5 P Protection,e.g.:B0505XS-W5P MICRODC reserves the copyright http://www.microdc.cn Technical Enquiries-Email:[email protected] Tel:0086-20-86000646 Page 1 of 2 B-XS-W5 Series Typical Characteristics Notes Note 1 Maximum capacitive load is defined as the capacitive load that will allow start up in under 1 second without damage to the converter . Certifications Package Style and Pinning (mm) RoHS COMPLIANT INFORMATION Microdc Professional Power Module,Inc. This series is compatible with RoHS soldering systems with a peak wave solder temperature of 300°C Tel:0086-20-86000646 E-mail:[email protected] for 10 seconds. The pin termination finish on the SIP package type is Tin Plate, Hot Dipped over Matte Website:http://www.microdc.cn Tin with Nickel Preplate. The DIP types are Matte Tin over Nickel Preplate. Both types in this series are Microdc Professional Power module,Inc.makes no representation that backward compatible with Sn/Pb soldering systems. the use of its products in the circuits described herein, or the use of other technical information contained herein, will not infringe upon existing or REACH COMPLIANT INFORMATION future patent rights. Specifications are subject to change without notice. This series has proven that this product does not contain harmful chemicals, it also has harmful chemical ©2010 Microdc Professional Power Module, Inc. Guangzhou substances through the registration, inspection and approval. http://www.microdc.cn Technical Enquiries-Email:[email protected] Tel:0086-20-86000646 Page 2 of 2