POWER INDUCTORS <SMD Type: CDEP Series> Type: CDEP125ME ◆ Product Description ・12.9×12.9mm Max. (L×W), 5.5mm Max. height ・Inductance range: 0.3～2.9μH ・Rated Current Range: 11.5～21A ・In addition to the standards versions shown here, custom inductors are also available to meet your exact requirements. ◆ Feature ・Super high current inductors. ・Iron powder core used, Flat wire used. ・Ideally used in portable computer CPU power supply. ・RoHS Compliance ◆ Dimensions (mm) MAX.5.5 2.6±0.2 ◆ Schematics (Bottom) 10.0 ② ③ 3.0 2.3 4.0 3.0 ◆ Land Pattern (mm) 2.1±0.2 12.5±0.4 2.6±0.2 8.5±0.2 7.0±0.2 12.5±0.4 2.0 8.2 ① 3.3 13.5 Please refer to the sales offices on our website for a representative near you www.sumida.com 1/2 POWER INDUCTORS <SMD Type: CDEP Series> Type: CDEP125ME ◆ Specification Part Name ※ Saturation Current （A）※1 100kHz/1V D.C.R. (mΩ) Max.(Typ.) (at 20℃) Temperature Rise current (A) ※2 Inductance Stamp ［Within］ CDEP125MENP-ØR3N□ 0R3N 0.3μH±25％ 1.2(1.0) 40.0 21.0 CDEP125MENP-ØR7N□ 0R7N 0.7μH±25％ 2.0(1.7) 32.0 20.0 CDEP125MENP-1R2N□ 1R2N 1.2μH±25％ 3.1(2.6) 25.6 17.5 CDEP125MENP-2RØN□ 2R0N 2.0μH±25％ 4.9(4.1) 20.4 13.5 CDEP125MENP-2R9N□ 2R9N 2.9μH±25％ 7.5(6.3) 16.0 11.5 ※ Description of part name CDEP125MENP-ØR3N□ B Box C Carrier Tape ※1. Saturation current: The DC current at which the inductance decreases to 80% of it’s initial value. (Ta＝20℃) ※2 Temperature rise current:The DC current at which the temperature rise is △t＝40℃.(Ta＝20℃) Please refer to the sales offices on our website for a representative near you www.sumida.com 2/2