3.0x2.0mm SURFACE MOUNT LED LAMP AA3020YC Features z 3.0MM X 2.0MM, 1.4MM HIGH, ONLY MINIMUM SPACE REQUIRED. z SUITABLE FOR COMPACT OPTOELECTRONIC YELLOW Description The Yellow source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide Yellow Light Emitting Diode. APPLICATIONS. z LOW POWER CONSUMPTION. z PACKAGE : 2000PCS / REEL. z RoHS COMPLIANT Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3.Specifications are subject to change without notice. SPEC NO: DSAD1217 REV NO: V.4 APPROVED: J. Lu CHECKED: Allen Liu DATE: MAR/17/2005 DRAWN: H.Q.YUAN PAGE: 1 OF 4 ERP:1201000159 Selection Guide Part No. Dice YELLOW (GaAsP/GaP) AA3020YC Iv (mcd) @ 20mA Lens Type WATER CLEAR Viewing Angle Min. Typ. 2θ1/2 4 15 90° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device λpeak Peak Wavelength Yellow λD Dominant Wavelength ∆λ1/2 Typ. Max. Units Test Conditions 590 nm IF=20mA Yellow 588 nm IF=20mA Spectral Line Half-width Yellow 35 nm IF=20mA C Capacitance Yellow 20 pF VF=0V;f=1MHz VF Forward Voltage Yellow 2.1 2.5 V IF=20mA IR Reverse Current Yellow 10 uA VR = 5V Absolute Maximum Ratings at TA=25°C Parameter Yellow Units Power dissipation 105 mW DC Forward Current 30 mA Peak Forward Current [1] 140 mA 5 V Reverse Voltage Operating/Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAD1217 REV NO: V.4 APPROVED: J. Lu CHECKED: Allen Liu DATE: MAR/17/2005 DRAWN: H.Q.YUAN PAGE: 2 OF 4 ERP:1201000159 Yellow AA3020YC SPEC NO: DSAD1217 REV NO: V.4 APPROVED: J. Lu CHECKED: Allen Liu DATE: MAR/17/2005 DRAWN: H.Q.YUAN PAGE: 3 OF 4 ERP:1201000159 AA3020YC Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. SPEC NO: DSAD1217 REV NO: V.4 APPROVED: J. Lu CHECKED: Allen Liu DATE: MAR/17/2005 DRAWN: H.Q.YUAN PAGE: 4 OF 4 ERP:1201000159